Liftmaster 041ASWG-0597SA, CABLE, 6'
LiftMaster 041ASWG-0597SA is a 6 foot replacement cable for select LiftMaster swing gate operator systems. It is often used in LA412-style service applications where the cable needs to reach between operator components while allowing proper routing and strain relief. In a gate environment, a cable that is too short can pull on the connector, while a cable that is too long can be left loose where it may rub, snag, or collect water.
This cable is commonly replaced when the original harness is cut, crushed, corroded, sun-damaged, or causing intermittent system behavior. A replacement cable may restore stable low-voltage operation, but it should not be used to cover up a deeper issue such as a dragging gate, moving bracket, or cable route that gets pinched during the open or close cycle.
Compatible With
- LiftMaster LA412 swing gate operator applications where the 6 foot cable is specified.
- Select LiftMaster swing gate operator systems and perimeter access solutions that call for 041ASWG-0597SA.
- Other LA-series or ASWG actuator service applications only when the parts diagram confirms the 6 foot cable and connector style.
- Not a direct substitute for 041ASWG-0454 1 meter or 041ASWG-0489 3 meter cables without verification.
Compatibility note: LiftMaster service parts should be matched by model number, original part number, finish, connector style, voltage rating, or the official replacement parts diagram. Similar-looking parts are not always interchangeable.
Features & Specifications
| Manufacturer | LiftMaster / Chamberlain Group |
|---|
| Product Type | Replacement connection cable |
|---|
| Part Number | 041ASWG-0597SA |
|---|
| Application | Power/data connection cable for select swing gate operator systems |
|---|
| Cable Length | 6 feet |
|---|
| Compatible Operator Type | Commonly associated with LiftMaster LA412 and select swing gate/perimeter access applications |
|---|
| Also Known As | 41ASWG-0597SA, LM-041ASWG-0597SA |
|---|
| Notes | Confirm length, connector style, routing, and parts diagram before ordering |
|---|
Also Known As / Related Part Numbers
- 041ASWG-0597SA
- 41ASWG-0597SA
- LM-041ASWG-0597SA
- LiftMaster 6 foot cable
- LiftMaster LA412 cable
- ASWG 6 foot cable
Technician Note
Before replacing this part, check the surrounding hardware, wiring, enclosure, actuator, or receiver components that could have caused the original failure. On gate and access-control equipment, water intrusion, loose mounting, rodent damage, binding gates, and incorrect previous repairs often create repeat failures.
Before Ordering Checklist
- Confirm the manufacturer part number on the old part or in the parts diagram.
- Match the installed model, series, finish, voltage, cable length, connector, or mechanical style as applicable.
- Inspect nearby wiring, brackets, covers, fasteners, seals, and mounting points for damage.
- Do not substitute a similar-looking LiftMaster part unless the model-specific parts diagram supports it.
- For electrical or moving-gate repairs, disconnect power and use a qualified gate or access-control technician when needed.
Professional Advisory
Gate operators and telephone entry systems can involve moving gates, stored force, low-voltage controls, and line-voltage power sources. Do not bypass safety devices or force a gate system to run with damaged wiring or missing covers. If the system has unsafe movement, repeated faults, or electrical damage, have the installation inspected by a qualified technician.
Product Questions & Answers
What is 041ASWG-0597SA?
It is a 6 foot replacement connecting cable used on select LiftMaster swing gate operators, with LA412 commonly referenced in listings.
Is this cable used only on LA412?
LA412 is a common confirmed reference, but some listings describe it for various LiftMaster swing gate operators and perimeter access solutions. The parts diagram should be checked.
041ASWG-0597SA is a 6 foot cable. 041ASWG-0454 is a 1 meter cable, and 041ASWG-0489 is a 3 meter cable.
What related numbers are used?
Common related references include 041ASWG-0597SA, 41ASWG-0597SA, and LM-041ASWG-0597SA.
What should be inspected if the cable keeps failing?
Check routing, strain relief, gate movement, actuator brackets, water intrusion, and any location where the cable may rub or flex during gate travel.
