LiftMaster 041D0236 16-Button Keypad for EL2000 and EL25 Product Overview
The LiftMaster 041D0236 keypad is the 16-button keypad service part used on compatible EL2000 and EL25 Elite Series telephone entry systems. On these entry systems, the keypad is the daily-use interface for resident codes, directory interaction, and access control commands. A worn keypad can cause missed digits, intermittent code entry, or customer complaints that the entry system will not accept codes even when the controller is functioning. The keypad should be matched by model and parts diagram because other LiftMaster telephone entry systems can use different keypad assemblies, ribbon cable layouts, and gasket arrangements. Replacing the keypad is also a good time to inspect the faceplate, cabinet seal, and internal harness for moisture or corrosion.
Features and Specifications
| Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | 16-button keypad replacement kit |
| Part Number | 041D0236 |
| Application | Telephone entry keypad service replacement |
| Compatible Product Families | EL2000 and EL25 series telephone entry systems |
| Included Components | 16-button keypad face with ribbon cable and weather protection gasket as supplied |
| Mounting Style | Entry-system front panel keypad assembly |
| Notes | Verify model and parts diagram before ordering |
Compatible With
- LiftMaster EL2000 telephone entry systems
- LiftMaster EL25 telephone entry systems
- LiftMaster Elite Series EL2000 and EL25 keypad service applications
- Select EL2000/EL25 units using the 16-button keypad assembly shown in the parts diagram
Also Known As / Related Part Numbers
- 041D0236
- 41D0236
- 41D236
- D0236
- LiftMaster 16 button keypad
- EL2000 keypad
- EL25 keypad
- Elite Series keypad replacement kit
Technician Note
If some buttons work and others do not, the keypad may be the issue, but the ribbon cable, connector, moisture, or control board input can also be involved. Inspect the gasket and face area so the new keypad is not damaged by the same water path.
Before Ordering Checklist
- Confirm the telephone entry system is EL2000 or EL25.
- Compare the old keypad style and ribbon connection to 041D0236.
- Inspect the faceplate and gasket area for water intrusion.
- Check for damaged connector pins or corrosion on the receiving board.
- Confirm the customer does not need a full board, display, or complete entry unit.
Important Ordering Warnings
041D0236 is for compatible EL2000 and EL25 systems and should not be assumed to fit CAPXL, CAPXLV, EL1SS, IPAC, TAC, or other LiftMaster entry systems.
Professional Advisory
For access control systems serving a community, commercial property, or secured entry, board and low-voltage component replacement should be handled with the power disconnected and the wiring documented before removal. If there are damaged conductors, water intrusion, burned traces, or unreliable gate/door movement after replacement, have the system checked by a qualified access control technician.
Product Questions and Answers
Which entry systems use the 041D0236 keypad?
It is commonly listed for LiftMaster EL2000 and EL25 Series telephone entry systems.
Does this keypad include the entire telephone entry system?
No. It is a replacement keypad assembly, not the full entry system, main board, or display.
Can a bad keypad cause code-entry problems?
Yes. Worn buttons, a damaged ribbon cable, or moisture at the keypad can cause missed or intermittent digits.
Is the weather gasket important?
Yes. The gasket helps protect the keypad opening and should be installed correctly to reduce moisture problems.
Can this keypad be used on CAPXL or IPAC systems?
No confirmed compatibility was found for CAPXL or IPAC. Use the parts diagram for those systems instead.
