Liftmaster 041A5595 Chain and Cable Kit 7' Door 41A5595 Chamberlain 3/4HP Opener
The LiftMaster 041A5595 is a one-piece chain and cable assembly used on select 3/4 HP chain drive residential garage door openers set up for a 7 ft high door. On chain drive openers, the chain and cable assembly transfers motor force from the sprocket to the trolley, so the correct length and style are critical for proper travel. A worn chain/cable assembly may cause jerky operation, poor tension, grinding noise, trolley skip, opener strain, or travel limits that will not stay set. This kit is a service replacement for the chain and cable only; it is not a complete rail, sprocket, gear, trolley, or opener motor assembly. Because chain drive rail systems vary by horsepower, rail length, and generation, the safest fitment method is to match the original parts diagram and confirm the opener is a compatible 3/4 HP 7 ft chain drive system.
Compatible With
For select 3/4 HP LiftMaster and Chamberlain chain drive garage door openers installed on 7 ft high residential garage doors. Commonly associated with one-piece 7 ft chain and cable replacement applications where part number 041A5595 or 41A5595 appears in the opener parts diagram.
Important Compatibility Notes
Use only on compatible 7 ft rail systems. This kit should not be treated as a universal chain for all chain drive openers, and it should not be used for 8 ft or 10 ft door extensions unless the parts diagram specifically calls for it.
Also Known As / Related Part Numbers
- 041A5595
- 41A5595
- LM-041A5595
- LiftMaster 7 ft chain and cable kit
- Chamberlain 7 ft chain and cable kit
- 3/4 HP chain drive chain cable assembly
Features & Specifications
| Feature / Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | Chain and cable replacement kit |
| Part Number | 041A5595 |
| Application | 7 ft residential garage door opener chain/cable replacement |
| Compatible Operator Type | Select 3/4 HP LiftMaster and Chamberlain chain drive openers |
| Door Height | 7 ft |
| Drive Type | Chain drive |
| Notes | Match by opener model, rail length, and parts diagram |
Technician Note
Before replacing the chain and cable, inspect the drive sprocket, gear, trolley, idler pulley, rail, and door balance. A stretched or damaged chain can be a symptom of a binding door or worn drive components.
Before Ordering
- Confirm the opener is a compatible 3/4 HP chain drive unit.
- Confirm the door height is 7 ft and the rail is the matching 7 ft setup.
- Match 041A5595 or 41A5595 in the parts diagram.
- Inspect the trolley and sprocket for wear before installing a new chain.
- Do not use this kit for belt drive, screw drive, or wall mount openers.
Professional Advisory
Chain and cable replacement requires correct tensioning and travel adjustment. If the door is not properly balanced or the opener continues to strain after replacement, stop using the opener and have the system serviced.
Important Ordering Warnings
- This is not the same as 041A5249 even though both are 7 ft chain and cable kits. Confirm the exact original part number.
- Not intended for 8 ft or 10 ft door rail extension applications unless confirmed by the opener parts diagram.
Product Q&A
Is 041A5595 for a 7 ft door?
Yes. It is a 7 ft chain and cable kit intended for select compatible 3/4 HP chain drive garage door openers.
Is 041A5595 the same as 41A5595?
Yes, 41A5595 is commonly used as the shorter version of the same LiftMaster/Chamberlain service part number.
Can this replace any LiftMaster chain?
No. Chain and cable kits are matched by opener model, rail length, horsepower family, and parts diagram.
What symptoms point to a worn chain and cable assembly?
Common signs include excessive slack, rough travel, chain noise, damaged cable, trolley skip, or opener strain after the door has been checked for balance.
Does this kit include the rail or trolley?
No. It is the chain and cable assembly only. Rail, trolley, sprocket, and motor components are separate parts.
