The LiftMaster 041C5588 is a high voltage wire harness replacement kit for select 3/4 HP LiftMaster and Chamberlain AC chain drive and belt drive garage door openers. It routes internal line-voltage power connections inside compatible opener heads.
This harness should be selected by the original part number, opener horsepower, and factory parts diagram.
What This Part Does
The 041C5588 harness carries high-voltage power inside the opener head. It may be needed when the original harness is damaged, heat-stressed, brittle, or no longer making a reliable connection.
Power problems can also come from the outlet, logic board, motor circuit, capacitor, or damaged terminals, so the full electrical path should be inspected.
Compatible With
The 041C5588 is for select 3/4 HP LiftMaster and Chamberlain AC chain drive and belt drive openers that specify this high-voltage harness.
Common Compatible Models to Verify
- LiftMaster 2575 3/4 HP chain drive opener
- LiftMaster 3575 3/4 HP chain drive opener
- Select LiftMaster 3/4 HP AC chain drive openers
- Select LiftMaster 3/4 HP AC belt drive openers
- Select Chamberlain 3/4 HP AC chain drive and belt drive models
- Systems that list 041C5588 or 41C5588 in the parts diagram
Important Compatibility Notes
- High-voltage internal wiring harness
- For select 3/4 HP AC applications
- Not a low-voltage control harness
- Match connector layout, wiring route, and opener horsepower
Features & Specifications
| Feature / Specification | Details |
|---|
| Manufacturer | LiftMaster / Chamberlain Group |
| Product Type | High Voltage Wire Harness Kit |
| Part Number | 041C5588 |
| Application | Internal line-voltage wiring replacement |
| Compatible Operator Type | Select 3/4 HP AC chain drive and belt drive openers |
| Voltage Application | 120 VAC residential opener circuits |
| Notes | Verify horsepower, connector layout, and service parts diagram |
Also Known As / Related Part Numbers
- 041C5588
- 41C5588
- LiftMaster 3/4 HP high voltage harness
- Chamberlain high voltage harness 3/4 HP
- AC opener power wire harness
Technician Note
Inspect the old harness and the mating terminals for heat damage. If the harness connector, logic board terminal, or motor connection is burned, replacing the harness alone may not restore safe operation.
Before Ordering, Confirm
- Original harness number is 041C5588 or 41C5588
- Opener is a compatible 3/4 HP AC model
- Plug style and wire route match the original harness
- Power is disconnected before service
- No burned or damaged mating terminals remain
Professional Advisory
This is a line-voltage electrical component. Disconnect power before service. Burned wiring, moisture damage, or repeated electrical failure should be inspected by a qualified garage door technician.
Important Ordering Warnings
- Do not install while opener is powered
- Not a low-voltage safety sensor or wall control harness
- Do not modify connectors to fit another opener
- 3/4 HP harnesses may differ from lower-horsepower versions
Questions & Answers
What is the 041C5588 harness used for?
It is used for internal high-voltage power wiring on select 3/4 HP LiftMaster and Chamberlain AC garage door openers.
Which models commonly use 41C5588?
It is commonly associated with select 3/4 HP models, including LiftMaster 2575 and 3575 families when confirmed by the parts diagram.
Is 041C5588 a low-voltage harness?
No. It is a high-voltage internal wiring harness and should not be confused with low-voltage control harnesses.
Can a damaged high-voltage harness cause no power?
Yes. A damaged or loose high-voltage harness can cause no-power or intermittent-power symptoms, though the outlet and logic board should also be checked.
Does this part require programming after replacement?
No programming is required for the harness itself, but the opener should be fully tested for travel and safety operation after service.
[ITEMPRICE]