LiftMaster 892LT 2-pack 2-Button Security+ 2.0 Learning Remote
The LiftMaster 892LT 2-pack 2-Button Security+ 2.0 Learning Remote is a multi-pack of LiftMaster 892LT two-button Security+ 2.0 learning remote controls for mixed access applications. It is commonly used in gated communities, multi-access properties, and customer vehicles where one remote may need to operate a community gate and a personal garage door.
Each button on the 892LT can be programmed independently, which gives it more flexibility than a standard single-technology remote. Depending on the programming method and receiver type, it can work with compatible Security+ 2.0, Security+ 315 MHz, Security+ 390 MHz, and selected LiftMaster DIP-switch remote technologies.
The 892LT is especially useful when replacing or consolidating compatible LiftMaster remote technologies, but it still needs to be matched to the existing learn button, receiver, or remote being cloned. It is not a universal remote for every brand or every non-LiftMaster radio system.
What This Remote Does
The remote transmits a wireless command to a compatible opener, gate operator, commercial receiver, or access system. Because each button can be programmed independently, the 892LT can support two different access points or two different compatible technologies in the same vehicle.
This makes it a practical choice where a standard remote is too limited, such as gated communities, mixed garage-and-gate installations, or service environments where compatible LiftMaster remote technologies need to be consolidated into fewer transmitters.
Compatible With
Compatibility is based on the receiver or operator radio technology, not only the brand printed on the remote. The following applications are commonly associated with this remote family when the opener, receiver, or accessory uses the correct learn button, frequency, security type, and programming method.
Common Compatible Products and Systems
- Select LiftMaster Security+ 2.0 garage door openers, gate operators, commercial door operators, and commercial receivers
- Select Security+ 315 MHz systems using purple learn button technology
- Select Security+ 390 MHz systems using red/orange learn button technology
- Select LiftMaster 850LM universal receiver applications
- Select LiftMaster 860LM weather-resistant receiver applications
- Select gated community access systems using compatible LiftMaster receiver technology
- Select applications where one button must operate a community gate and another button must operate a personal garage door
- Compatible cloning applications for select LiftMaster DIP switch remotes including 61LM, 361LM, and 811LM when programmed correctly
Important Compatibility Notes
- Each button can be programmed independently.
- Learning/cloning capability depends on the existing remote or receiver technology.
- Not a generic replacement for every brand; use with compatible LiftMaster/Chamberlain Group radio technologies or compatible receivers.
Features & Specifications
| Feature / Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | 2-pack 2-button Security+ 2.0 learning remotes |
| Part Number | 892LT-2 |
| Application | Mixed garage, gate, commercial, and community access control |
| Button Count | 2 buttons per remote |
| Direct Programming | Security+ 2.0 tri-band, Security+ 315 MHz, Security+ 390 MHz on compatible systems |
| Cloning | Select LiftMaster DIP switch remote technologies including 61LM, 361LM, and 811LM |
| Compatible Operator Type | Select garage door openers, gate operators, commercial door operators, commercial receivers, and gated community systems |
| Notes | Each button can be programmed independently when supported. |
Also Known As / Related Part Numbers
The following numbers and search terms are commonly related to this remote family. Some are alternate packaging, related remote families, or older technologies rather than exact one-for-one replacements. Match the receiver and programming method before treating any related number as interchangeable.
- 892LT
- 892LTMC
- 894LT
- 894LTMC
- 890 Series Security+ 2.0
- 370 Series Security+ 315 MHz
- 970 Series Security+ 390 MHz
- 972LM
- 974LM
- 372LM
- 374LM
- 61LM
- 361LM
- 811LM
- Learning remote
- 2-button learning remote
Technician Note
For best results, identify the opener or receiver learn button color before programming. Mixed-technology remotes are helpful, but the button sequence and programming mode must match the system being taught. If a remote will not program, clear radio memory only when you are prepared to reprogram every remote and keypad on that opener or receiver.
Before Ordering, Confirm
- The opener, gate operator, commercial operator, receiver, or accessory uses a compatible LiftMaster/Chamberlain Group radio technology.
- The learn button color, frequency, or DIP mode matches the remote being ordered.
- The number of remotes in the pack matches the quantity needed for the site.
- Each access point has an accessible learn/programming button or receiver programming method.
- The system does not require a managed access credential, proprietary community remote, or different manufacturer receiver.
- Any older remote being replaced uses the same technology or can be learned/cloned by this remote family.
Professional Advisory
Program and test each remote from a safe location with the door or gate in full view. A remote control should never be used to operate a door or gate with unsafe movement, missing safety devices, damaged hardware, or known entrapment hazards. For commercial door or gate systems, safety devices and monitored entrapment protection should be maintained according to the operator requirements.
Important Ordering Warnings
- Remote compatibility is not confirmed by brand name alone.
- Do not mix Security+ 2.0, Security+ 315 MHz, Security+ 390 MHz, Billion Code, and DIP-switch systems without confirming the correct remote technology.
- Residential garage door remotes and commercial DIP remotes are not always interchangeable.
- Community receivers may be locked, managed, or programmed by the property manager or access-control provider.
- If an opener has no working remotes and the learn button is damaged or inaccessible, additional troubleshooting may be required before programming.
Questions & Answers
Why use the 892LT 2-pack-pack for a gated community?
The 2-pack-pack provides multiple two-button learning remotes for vehicles or users that may need one button for a compatible community gate and another button for a compatible garage door.
Can the two buttons be programmed differently?
Yes. Each 892LT button can be programmed independently, allowing different compatible code types or access points to be assigned when the receiver and programming method support it.
Which radio technologies can the 892LT work with?
The 892LT can work with compatible Security+ 2.0, Security+ 315 MHz, and Security+ 390 MHz systems and can clone select LiftMaster DIP-switch remote technologies such as 61LM, 361LM, and 811LM.
Can the 892LT replace older LiftMaster remotes?
It may replace select older LiftMaster remote families such as 972LM, 974LM, 372LM, and 374LM when the system and programming method are compatible.
Is the 892LT the same as the 893MAX?
No. The 892LT is a two-button learning remote with DIP cloning capability for select LiftMaster technologies, while the 893MAX is a three-button universal learn-button remote.
