LiftMaster CAPAC Smart Access Hub with myQ Community
The LiftMaster CAPAC Smart Access Hub is a cloud-based access control upgrade for communities, multifamily buildings, commercial properties, gated sites, and shared-entry locations that need modern access management without a full system replacement. It is designed to bring compatible access points into the myQ Community platform so property managers can manage users, review activity, and control selected entrances from a centralized dashboard.
In the field, the CAPAC is often used when an existing gate or door access system still works mechanically but needs better management, remote control, resident app access, virtual guest access, or centralized administration. Instead of replacing every entry panel or access device, the CAPAC can be integrated with compatible gate operators, pedestrian entrances, amenity gates, door strikes, and magnetic locks when the site wiring and control inputs support the application.
This product is not a stand-alone gate operator and it does not replace required safety devices, operator controls, code-compliant wiring, or proper access control design. For best results, verify the number of entrances, power source, relay needs, Wiegand connections, internet/cellular signal, and myQ Community subscription requirements before installation.
Compatible With
The CAPAC may be used with select access control systems and access points that support the required wiring and control method. Common applications include:
- Vehicle gate access points with compatible relay input control
- Pedestrian gate access points
- Amenity gates and shared community entrances
- Door strikes and electric lock applications with proper access control wiring
- Maglock applications when installed with code-compliant life-safety hardware
- Existing community access control systems being upgraded for myQ Community management
- LiftMaster myQ Community managed properties
- Systems requiring Ethernet, Wi-Fi, or cellular connection options
- Up to four gates and/or doors when configured within supported system limits
Compatibility note: CAPAC compatibility depends on the complete system design, not just the brand of the gate operator or lock. Confirm power supply, relay outputs, Wiegand requirements, credential format, internet/cellular availability, and myQ Community subscription setup before ordering.
Also Known As / Related Part Numbers
- CAPAC
- LiftMaster CAPAC
- Smart Access Hub
- myQ Community Smart Access Hub
- LiftMaster Smart Access Hub
- CAPAC Smart Cellular Access Hub
- LIF-CAPAC
- O2-CAPAC
- Related LiftMaster Smart Access products: CAPXLV, CAPXM, CAPXS, CAP2D, CAPCELL, MYQCOMM
Features and Specifications
| Manufacturer | LiftMaster / Chamberlain Group |
|---|
| Part Number | CAPAC |
|---|
| Product Type | Smart Access Hub / cloud-based access control interface |
|---|
| Platform | myQ Community |
|---|
| Common Applications | Gated communities, multifamily properties, commercial entrances, pedestrian gates, amenity gates, door strikes, and maglocks |
|---|
| Access Point Capacity | Commonly used for up to 4 gates and/or doors, depending on configuration |
|---|
| Connectivity | Ethernet, Wi-Fi, or cellular options depending on service setup and site conditions |
|---|
| Power Requirement | Typically 6-24 VDC; verify installation instructions and site power source |
|---|
| Important Requirement | myQ Community service/subscription and proper site setup may be required |
|---|
Technician Notes
- Plan the access control layout before ordering so the number of gates, doors, relays, and credentials are known.
- Check the existing access equipment for dry-contact relay input, Wiegand needs, and available power.
- Cellular performance depends on signal quality at the enclosure location; weak signal can cause unreliable management.
- Do not use this product to bypass UL 325 gate safety devices or any required fire/life-safety hardware.
- Maglock and door strike applications should be installed according to local code and access control requirements.
Before Ordering Checklist
- Confirm the site uses or will use myQ Community.
- Count the exact gates and doors that need to be controlled.
- Confirm Ethernet, Wi-Fi, or cellular connectivity at the mounting location.
- Verify the available power source and wiring distance.
- Confirm compatibility with the existing gate operator, strike, maglock, reader, or access panel.
- Confirm subscription and activation requirements before scheduling installation.
Product Questions and Answers
What does the LiftMaster CAPAC do?
The CAPAC is a Smart Access Hub that adds cloud-based myQ Community control to compatible access points. It is commonly used to help monitor and control gates, pedestrian entrances, amenity doors, door strikes, and maglocks from a managed community access platform.
How many access points can the CAPAC control?
The CAPAC is commonly specified for up to four gates and/or doors, depending on the system layout, wiring, subscription setup, and connected access hardware.
Does the CAPAC replace the existing access control system?
In many retrofit applications, the CAPAC is used to add smart cloud management without replacing the entire existing system. The existing equipment still needs the proper relay, Wiegand, power, and control wiring compatibility.
Does the CAPAC require myQ Community service?
Yes. LiftMaster Smart Access products using myQ Community generally require the appropriate myQ Community subscription or service setup. Confirm service requirements with the property manager, dealer, or installer before ordering.
