Liftmaster IPACLEDK, IPAC LED FRONTLIGHT KIT
The LiftMaster IPACLEDK LED frontlight kit is used to service the front illumination on a LiftMaster IPAC telephone entry system. Good front lighting matters on an entry system because residents, guests, delivery drivers, and service providers need to read the screen area, locate the keypad, and use the unit safely at night. When the LED frontlight fails, the IPAC may still communicate and release the gate, but user experience and security camera visibility can suffer. This part is specific to the IPAC access-control platform and should be matched by part number. It is not the same as the IPAC light sensor and camera window kit, and it is not a replacement for the display or main electronics. If the failure was caused by water entry, the cabinet seals and light sensor area should be checked before the new lighting kit is installed.
Compatible With
- LiftMaster IPAC Internet Protocol Access Control telephone entry systems
- IPAC front panel lighting service where IPACLEDK is listed in the parts diagram
- IPAC access-control units used at gated communities, commercial entries, residential communities, and multi-tenant properties
- Service situations involving failed, dim, damaged, or missing IPAC front illumination
- Not for CAPXL, CAPXLV, CAP2D, EL series, garage door openers, or non-IPAC access-control panels unless confirmed
Features and Specifications
| Manufacturer | LiftMaster |
| Product Type | LED frontlight kit |
| Part Number | IPACLEDK |
| Application | IPAC front illumination service |
| Compatible System | LiftMaster IPAC telephone entry systems |
| Included Components | LED frontlight kit as supplied by LiftMaster |
| Voltage | System supplied low-voltage connection within compatible IPAC unit |
| Notes | Not a display, camera, control board, or light sensor kit |
Also Known As / Related Part Numbers
- IPACLEDK
- LiftMaster IPACLEDK
- IPAC LED frontlight kit
- IPAC front light kit
- IPAC lighting replacement kit
- Related but different: IPACLSBK light sensor and camera window kit
- Related IPAC service parts: IPACHK, IPACHWK, IPACRHK
Technician Note
If the frontlight failed after rain or cabinet damage, inspect the camera window, light sensor lens, gaskets, and wire connections. Replacing the LED kit without correcting water entry may lead to repeat failure.
Before Ordering Checklist
- Confirm the access-control unit is a LiftMaster IPAC
- Confirm the needed part is the LED frontlight kit, not the light sensor or camera window kit
- Inspect wiring and connectors for corrosion or broken leads
- Check the cabinet seals and front face for water damage
- Verify all lighting and display functions after installation
Professional Advisory
Low-voltage access-control lighting still depends on correct wiring and enclosure protection. If the IPAC has water damage, burned components, or unknown wiring changes, have it serviced by a qualified access-control technician.
Product Questions and Answers
What does IPACLEDK replace?
It replaces the LED frontlight assembly used on compatible LiftMaster IPAC telephone entry systems.
Is this the camera window kit?
No. The camera window and light sensor kit is IPACLSBK. IPACLEDK is the LED frontlight kit.
Will the IPAC still work if the frontlight is out?
The system may still operate, but nighttime visibility and visitor usability can be reduced.
Does this fit CAPXL?
No. This page is written for IPAC systems. CAPXL parts should be matched separately.
What else should be checked during replacement?
Check seals, wiring, connectors, and the light sensor/camera window area for water or physical damage.
