LiftMaster K-AUMB Adjustable RFID Mounting Bracket
The LiftMaster K-AUMB is an adjustable RFID mounting bracket service kit used with the LiftMaster LMSC1000 long-range RFID vehicle access reader. It provides a secure mounting point and allows the reader to be positioned for improved tag detection at a gate, parking lane, or controlled vehicle entrance.
Long-range RFID installations are sensitive to reader angle, mounting height, lane position, vehicle approach, tag placement, and nearby metal or masonry. The bracket is not just a hardware accessory; it is part of getting the reader aimed correctly so the access system reads the intended vehicle tag and avoids unreliable detection.
This product should be treated as a mounting bracket service kit only. It does not include the LMSC1000 reader, Wiegand interface module, vehicle tags, access-control panel, gate operator, or any required conduit and wiring unless the product listing specifically states otherwise.
Common Use Cases
- Mounting a LiftMaster LMSC1000 long-range RFID reader
- Repositioning an RFID reader for better vehicle-tag detection
- Replacing a damaged or missing reader mounting bracket
- Improving reader angle in parking, gated community, or access-control lanes
- Supporting RFID installations using LiftMaster vehicle tags or hang tags with the proper reader
Compatible With
K-AUMB is commonly listed as the adjustable mounting bracket for the LiftMaster LMSC1000 long-range RFID reader.
- LiftMaster LMSC1000 long-range RFID reader
- LiftMaster long-range vehicle access-card reader applications using LMSC1000
- Sites using compatible LiftMaster RFID vehicle credentials such as glass-mount or hang-tag style credentials
- Wiegand-based access-control installations where the LMSC1000 reader is properly mounted and aimed
Important: Compatibility should be verified by the original part number, model number, production version, and the correct LiftMaster parts diagram before ordering. Similar-looking parts may not fit the same system.
Not Intended For
- RFID readers with different mounting patterns unless verified
- Replacing the LMSC1000 reader, K-S2W Wiegand interface module, or vehicle tags
- General-purpose pole brackets not designed for the reader
- Installations where poor detection is caused by wrong tag type, failed reader electronics, wiring faults, or access-panel programming
- Mounting in locations where the reader cannot be aimed safely at the intended vehicle lane
Features & Specifications
| Feature / Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | Adjustable RFID reader mounting bracket |
| Part Number | K-AUMB |
| Application | Mounting and positioning compatible long-range RFID readers |
| Compatible Reader | LiftMaster LMSC1000 long-range RFID reader |
| Common Use | Vehicle access, parking entry, gated community, and controlled entrance RFID installations |
| Related Credentials | Compatible LiftMaster RFID tags or hang tags used with the LMSC1000 system |
| Includes | Mounting bracket service kit only, unless otherwise stated |
| Notes | Reader aim, mounting height, lane geometry, and tag placement affect performance. |
Also Known As / Related Part Numbers
- LiftMaster K-AUMB
- K-AUMB
- KAUMB
- LIF-K-AUMB
- LiftMaster RFID Mounting Bracket
- RFID Mounting Bracket Service Kit
- LMSC1000 Mounting Bracket
- Adjustable RFID Reader Bracket
- LiftMaster Long Range RFID Reader Bracket
Technician Note
When installing long-range RFID, do not judge performance until the reader is aimed and tested with the actual credential type, vehicle position, and lane approach. A reader that is flat against a wall or post may not provide the best read zone.
If a site has inconsistent reads, check the reader angle, tag placement, wiring, interface module, access-panel programming, and nearby interference before assuming the bracket or reader is defective.
Before Ordering, Confirm
- The reader being mounted is a LiftMaster LMSC1000 or confirmed compatible reader.
- The bracket mounting pattern and reader attachment points match.
- The mounting surface, post, or wall can support the reader and bracket securely.
- The reader can be aimed at the intended vehicle lane without creating unsafe traffic flow.
- The correct RFID tags or credentials are being used.
- The Wiegand interface, power, and access-control wiring are planned separately.
Professional Advisory
Install the bracket so the reader is secure, properly aimed, and protected from impact where practical. Avoid mounting in a location where vehicles can strike the reader or where the reader points at the wrong lane.
After mounting, test read range with actual vehicles and credentials. Adjust the angle carefully and verify that the gate or access system operates only for authorized credentials.
Product Q&A
What is the LiftMaster K-AUMB used for?
K-AUMB is an adjustable RFID mounting bracket used to mount and position the LiftMaster LMSC1000 long-range RFID reader.
Does K-AUMB include the RFID reader?
No. K-AUMB should be treated as the mounting bracket service kit only. The LMSC1000 reader, tags, wiring, and access-control panel are separate unless a listing states otherwise.
Which reader is this bracket compatible with?
This bracket is commonly listed for the LiftMaster LMSC1000 long-range RFID reader. Verify the reader model and mounting requirements before ordering.
Why is bracket adjustment important?
Long-range RFID performance depends on reader aim, tag placement, lane geometry, vehicle position, and site conditions. An adjustable bracket helps position the reader for a better detection field.
Can this bracket be used with any RFID reader?
Do not assume universal compatibility. The bracket should be used with the LiftMaster reader models and mounting patterns it is designed for.
