Liftmaster K41-0222-000 Replacement Speaker Kit for CAPXM Access Control Entry System
The LiftMaster K41-0222-000 speaker replacement kit restores the audio output side of the CAPXM Smart Video Intercom. In normal operation, the speaker lets visitors hear residents, property staff, call prompts, and entry communication at the gate or door station. A failed or damaged speaker can make the system seem like the call is not working, even when video, relay output, app connection, and microphone input are still functioning. This kit is specifically written for CAPXM medium-series systems, where the speaker mounting and wiring differ from CAPXL/CAPXLV high-capacity intercom parts. When repairing intercom audio, verify whether the issue is speaker output, microphone input, network call quality, app routing, or board-level failure before replacing parts. The enclosure should also be checked for water intrusion or damage around the speaker opening.
Features and Specifications
| Manufacturer | LiftMaster |
|---|
| Product Type | Speaker replacement kit |
|---|
| Part Number | K41-0222-000 |
|---|
| Application | CAPXM audio output repair |
|---|
| Compatible System Type | Smart Video Intercom Medium Series |
|---|
| Notes | CAPXM speaker kit; verify by parts diagram |
|---|
Compatible With
- LiftMaster CAPXM Smart Video Intercom Medium Series access-control systems
- CAPXM myQ Community connected entry systems where the original speaker kit is K41-0222-000
- Not intended for CAPXL or CAPXLV speaker replacements; those commonly use K002B1910 where listed
Also Known As / Related Part Numbers
- K41-0222-000
- CAPXM speaker kit
- CAPXM speaker replacement
- LiftMaster Smart Video Intercom speaker kit
- LIF-K41-0222-000
Technician Note
If the person at the entrance cannot hear the resident, suspect the speaker path. If the resident cannot hear the visitor, inspect the microphone path instead.
Before Ordering
- Confirm the intercom is a CAPXM medium-series unit.
- Compare the original speaker connector and mounting to K41-0222-000.
- Inspect the front panel and speaker opening for water, insects, debris, or damage.
- Test microphone and speaker audio separately before replacing parts.
- Run a live call test after installation.
Professional Advisory
Connected entry audio should be tested from both sides of the call. A speaker kit will not correct weak Wi-Fi/cellular service, app routing issues, or a failed microphone.
Important Ordering Warnings
- Do not substitute CAPXL/CAPXLV speaker K002B1910 for this CAPXM speaker kit without a parts diagram.
- Do not block the speaker opening with sealant or paint.
Product Questions and Answers
Which model uses K41-0222-000?
K41-0222-000 is commonly listed for LiftMaster CAPXM Smart Video Intercom Medium Series systems.
Is this the same as K002B1910?
No. K002B1910 is commonly listed for CAPXL/CAPXLV speaker replacement. K41-0222-000 is the CAPXM speaker kit.
What problem does the speaker kit fix?
It can fix failed or distorted audio output at the entry station when the speaker assembly is the diagnosed cause.
Can audio issues be caused by something else?
Yes. Microphone failure, network issues, front panel damage, app settings, or board problems can all affect intercom audio.
Should the unit be tested after installation?
Yes. Test call audio, visitor prompts, resident communication, and entry release operation after replacement.
