LiftMaster K41-0245-000 BLDC Power/Motor Drive Board for IHSL24UL
The LiftMaster K41-0245-000 is the brushless DC power and motor drive board service kit for the IHSL24UL industrial heavy-duty slide gate operator. This board handles the motor-drive side of the system and is part of the electrical path that controls motor output, speed behavior, and drive response. It is different from the main control board and should not be ordered as a general control-board replacement. Common reasons to inspect this board include motor drive faults, no motor movement after other inputs check normal, burned or damaged board components, water intrusion, lightning or surge damage, or faults that remain after the motor, batteries, harnesses, and mechanical drive train are checked. Correct diagnosis is important because a failed motor, shorted harness, poor battery condition, or jammed gate can look like a bad drive board. Match the exact part number and IHSL24UL model before ordering.
Compatible With
This part is commonly associated with the following LiftMaster operator models and service applications. Always verify the installed model number and parts diagram because similar industrial slide operators may use different motors, boards, reducers, or harnesses.
- LiftMaster IHSL24UL industrial heavy-duty slide gate operators
- LiftMaster IHSL24ULMC references
- IHSL24UL brushless DC motor drive systems
- Replacement use where the parts diagram calls for K41-0245-000
Also Known As / Related Part Numbers
- K41-0245-000
- 41-0245-000
- LiftMaster K41-0245-000
- IHSL24UL BLDC board
- IHSL24UL motor drive board
Features & Specifications
| Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | BLDC Power / Motor Drive Board |
| Part Number | K41-0245-000 |
| Application | Brushless DC motor drive and power control board for IHSL24UL operators |
| Compatible Operator Type | Industrial 24VDC slide gate operator |
| Compatible Models | IHSL24UL, IHSL24ULMC |
| Security / Safety Note | Keep all required monitored entrapment protection devices connected and working. |
| Notes | Verify the installed operator model, original part number, and current LiftMaster parts diagram before ordering. |
Technician Note
Do not confuse this IHSL24UL board with K41-0244-000 for INSL24UL or with the HD main control board. Connector layout and operator family matter. If the original part failed after a surge, water intrusion, gate impact, or mechanical binding condition, correct that problem before installing the replacement part.
Before Ordering
- Confirm the LiftMaster operator model and any MC or package-code reference on the data label.
- Compare the installed part number and connector style against the current parts diagram.
- Inspect related drive, wiring, battery, control-board, and safety-device components before replacing parts.
- Do not use similar-looking INSL24UL and IHSL24UL parts interchangeably unless the parts diagram confirms it.
- Use a qualified gate technician for high-voltage, battery, motor, drive-board, or moving-gate service.
Professional Advisory
Industrial slide gate operators are powerful pieces of moving equipment. After any motor, board, limit, harness, alarm, or gear reducer repair, the gate must be tested through a complete open and close cycle with all required monitored safety devices connected and operating. Do not bypass photo eyes, safety edges, interlocks, alarms, or other entrapment protection devices to force the operator to run.
Important Ordering Warnings
- INSL24UL and IHSL24UL parts can look similar but may not interchange.
- Model suffixes, package codes, and parts-diagram revisions can affect the correct service part.
- Electrical faults, water damage, or gate binding can damage replacement parts if left unresolved.
- Compatibility is based on supported model families and should be verified against the installed operator.
Product Questions & Answers
Is K41-0245-000 the complete gate operator motor?
K41-0245-000 is a motor replacement kit for the listed LiftMaster industrial slide gate operator family. It is not a complete gate operator, gear reducer, control board, or chain drive assembly.
Can this motor be used on both INSL24UL and IHSL24UL?
No. Use the motor listed for the exact operator family. The Compatible With section shows the supported model references for this part, and the installed parts diagram should be checked before ordering.
What should be checked before replacing the motor?
Check the gate for binding, inspect the chain and sprockets, verify battery and incoming power condition, and look for motor-drive board or harness faults. A mechanical problem can damage a new motor.
Does the motor need programming after installation?
The motor itself is a service part, but the operator travel, limits, force/obstruction response, and safety devices should be checked after service according to the LiftMaster instructions.
Who should install this motor?
A qualified gate technician is recommended because the operator includes moving mechanical parts, battery circuits, and electrical controls that can be unsafe if handled incorrectly.
