LiftMaster K75-50250 CSW UL Cover Q247
The LiftMaster K75-50250 cover is a CSW UL replacement enclosure cover associated with CSW200UL swing gate operator applications. It is used to protect the operator housing and internal components from weather, dirt, and accidental contact. This part is commonly referenced as Elite Q247 and is important when restoring older CSW200UL units with cracked or missing covers. Multiple listings identify this cover as obsolete, discontinued, or no longer available, so it should be reviewed carefully before keeping it active as a purchasable item. If a customer is replacing a CSW cover, the exact Q number and operator model should be checked because other CSW covers may look similar but may not mount correctly.
This part is best suited for service work where the operator has already been identified and the original part location is known. On older LiftMaster and Elite gate operators, small differences in production date, UL listing generation, enclosure style, arm geometry, or mounting hardware can change which replacement part is correct. For that reason, this product page uses careful compatibility language and includes the common related numbers customers may use when searching for the part.
Compatible With
- LiftMaster CSW200UL swing gate operator applications where K75-50250 or Q247 is specified. This part is commonly listed as discontinued/no longer available, with no direct compatible replacement shown in several listings.
Compatibility note: Manual review recommended. This part is commonly shown as discontinued with no direct replacement, so stock status and substitute policy should be confirmed before upload or sale.
Features
- Replacement cover reference for CSW200UL-style applications
- Commonly referenced as Elite Q247
- Protects the operator cabinet and internal drive/control components
- Important for older CSW UL service and restoration jobs
- Often listed as discontinued or no longer available
Features & Specifications
| Manufacturer | LiftMaster |
|---|
| Product Type | Operator Cover |
|---|
| Part Number | K75-50250 |
|---|
| Also Known As | K75-50250, 75-50250, Q247, Elite Q247, LiftMaster Q247 |
|---|
| Application | Replacement cover for CSW200UL commercial swing gate operators |
|---|
| Compatible Operator Type | LiftMaster CSW200UL swing gate operator applications where K75-50250 or Q247 is specified. This part is commonly listed as discontinued/no longer available, with no direct compatible replacement shown in several listings. |
|---|
| Reference Number | Q247 |
|---|
| Notes | Verify by model number, original part number, and parts diagram before ordering. |
|---|
Also Known As / Related Part Numbers
- K75-50250
- 75-50250
- Q247
- Elite Q247
- LiftMaster Q247
- CSW UL cover
- LM-K75-50250
Technician Note
When replacing this part, inspect the surrounding brackets, fasteners, bushings, pivots, wiring, covers, seals, and drive hardware in the same assembly. A failed support part can sometimes be caused by a misaligned gate, loose mounting hardware, worn clutch parts, or a cabinet that has been exposed to water or debris. Replacing only the visible damaged part without correcting the cause can lead to repeat failures.
Before Ordering
- Confirm the LiftMaster model number on the operator nameplate.
- Compare the original part number and Q-number with the parts diagram.
- Check mounting holes, linkage shape, cover style, hardware length, or electrical/mechanical configuration as applicable.
- Inspect related worn hardware before replacing only one part.
- For commercial gates, restore all covers and safety equipment before returning the operator to service.
Professional Advisory
Commercial gate operators can move heavy gates and may contain high-voltage wiring, stored mechanical force, or pinch points. Mechanical service should be performed with the gate secured and the operator power disconnected by a qualified technician when needed. Do not bypass monitored safety devices or operate a damaged gate system without proper safety protection.
Important Ordering Warnings
Manual review recommended. This part is commonly shown as discontinued with no direct replacement, so stock status and substitute policy should be confirmed before upload or sale.
Product Questions & Answers
What is the LiftMaster K75-50250 used for?
The LiftMaster K75-50250 is a replacement operator cover used for replacement cover for csw200ul commercial swing gate operators. It is ordered when the original part is worn, damaged, missing, or no longer functioning correctly.
Is K75-50250 the same as Q247?
Yes. Q247 is the common Elite or LiftMaster reference number associated with K75-50250. Related search numbers may appear in parts lists, but the installed operator diagram should still be checked.
Which operators is K75-50250 compatible with?
K75-50250 is commonly associated with LiftMaster CSW200UL swing gate operator applications where K75-50250 or Q247 is specified. This part is commonly listed as discontinued/no longer available, with no direct compatible replacement shown in several listings. Use the exact operator model and parts diagram to confirm final fitment.
What should be checked before ordering K75-50250?
Check the operator model, original part number, Q-number, mounting style, hardware condition, and any model suffix or production-date notes that apply to the installed unit.
Can this part be used as a universal replacement?
No. K75-50250 should not be treated as a universal LiftMaster gate operator part. Similar-looking covers, arms, latches, clutch parts, and hardware kits may use different dimensions or mounting points.
