Liftmaster 041-0106, SMART GARAGE CONTROL POWER SUPPLY
The LiftMaster 041-0106 is the factory replacement power supply adapter used to power compatible myQ Smart Garage Control hub products. This external adapter plugs into a wall outlet and feeds low-voltage power to the smart control hub so the hub can communicate with the myQ app and the paired garage door opener. It is a common replacement when the hub is dead, the original adapter was lost, or the cord or plug has been damaged.
This part should be matched to the smart hub, not to the garage door opener head. A compatible Smart Garage Control can work with many residential openers, but the 041-0106 adapter is still only the power supply for the hub itself. If the hub powers up but will not pair, loses Wi-Fi, or will not trigger the door, the issue may be programming, router signal, door sensor setup, or hub failure rather than the adapter.
Compatible With
- 821lmc-sensor-additional-door-sensor-for-smart-garage-control.html">LiftMaster 821LMC Smart Garage Control hub applications
- Chamberlain MYQ-G0401 and MYQ-G0401-ES Smart Garage Control hub applications where the original power supply matches 041-0106
- myQ Smart Garage Control kits that list 041-0106 as the replacement power supply
- Residential garage door opener systems controlled through a compatible myQ hub, when the hub itself uses this adapter
- Not used as the main power supply or transformer for the garage door opener motor head
Also Known As / Related Part Numbers
- 041-0106
- LM-041-0106
- LiftMaster 041-0106
- Smart Garage Control Power Supply
- Smart Garage Control AC Power Supply Adapter
- myQ Smart Garage Control power adapter
- Related hub references: 821LMC, MYQ-G0401, MYQ-G0401-ES
Features and Specifications
| Manufacturer | LiftMaster / Chamberlain Group |
|---|
| Product Type | Smart Garage Control power supply adapter |
|---|
| Part Number | 041-0106 |
|---|
| Application | Low-voltage power for compatible myQ Smart Garage Control hub |
|---|
| Input | 100-240V AC, 50/60Hz, 0.5A |
|---|
| Output | 5.0V DC, 1.5A |
|---|
| Compatible Operator Type | Compatible residential garage door openers controlled through the hub, when the hub uses this adapter |
|---|
| Notes | Powers the smart hub only; does not replace the garage door opener transformer |
|---|
Technician Note
Match the original adapter rating and connector before ordering. A hub with no LED activity may have a bad power adapter, but surge damage or a failed hub board can show the same symptom.
Before Ordering
- Confirm the smart hub model uses 041-0106
- Compare the output rating and connector to the original adapter
- Inspect the hub for moisture, corrosion, or physical damage
- Do not use this adapter to power the opener head, wall control, receiver, or accessory terminals
- Reset and re-pair the hub only after stable power is restored
Professional Advisory
Low-voltage smart hub work is usually straightforward, but troubleshooting line-voltage outlets, damaged wiring, or opener electrical faults should be handled by a qualified technician.
Important Ordering Warning
This adapter does not correct opener motor problems, safety sensor faults, travel errors, or a failed logic board inside the garage door opener.
Product Questions and Answers
What does the LiftMaster 041-0106 power?
It powers the compatible Smart Garage Control hub. It does not power the garage door opener motor or replace the opener transformer.
Is 041-0106 used with the 821lmc-sensor-additional-door-sensor-for-smart-garage-control.html">LiftMaster 821LMC?
Yes, 041-0106 is commonly listed as the replacement power supply for the 821lmc-sensor-additional-door-sensor-for-smart-garage-control.html">LiftMaster 821LMC Smart Garage Control hub.
Can this adapter fix a myQ hub that will not connect to Wi-Fi?
Only if the hub is not receiving proper power. Wi-Fi pairing problems can also come from router signal, app setup, door sensor pairing, or a failed hub.
Can I use any 5V adapter instead?
The safest approach is to use the correct LiftMaster replacement adapter and match the connector and output rating.
Does this part include the door sensor?
No. This is the power supply only. Door sensors and sensor batteries are separate service parts.
