Liftmaster 041A5577-1, PUSH BUTTON DOOR CONTROL
The 041A5577-1 push button door control is a simple wall-mounted control used to send an open/close command to compatible garage door openers. It is intended for older compatible opener systems that accept a basic push-button style wall station. It does not provide advanced features such as motion sensing, time-to-close setup, myQ functions, or digital menu control. Fitment matters because newer Security+ 2.0 yellow learn button openers often require specific digital wall controls and may not operate correctly with this older style push button.
Replacement is common when the existing wall button sticks, has a cracked housing, has worn contacts, works only when pressed hard, or is missing after a garage renovation.
Compatible With
- Select LiftMaster residential garage door openers that support a basic push button door control
- Select Chamberlain residential garage door openers that support this wall control type
- Older compatible opener generations before Security+ 2.0 yellow learn button systems
- Not compatible with Security+ 2.0 garage door openers manufactured after 2011 unless the manual specifically allows it
- Not a replacement for smart/digital wall consoles such as yellow learn button control panels
Features & Specifications
| Manufacturer | LiftMaster |
|---|
| Product Type | Push button door control |
|---|
| Part Number | 041A5577-1 |
|---|
| Application | Wall-mounted open/close control |
|---|
| Compatible Operator Type | Select residential garage door openers |
|---|
| Security Technology | Not for Security+ 2.0 yellow learn button systems |
|---|
| Included Components | Push button control, as supplied by manufacturer |
|---|
Also Known As / Related Part Numbers
Technician Note
If the wall button does not work, test carefully before replacing it. Broken low-voltage wire, lock mode on a multi-function console, safety sensor issues, or a failed logic board can all create control problems.
Before Ordering Checklist
- Confirm the opener accepts a basic push button wall control
- Check that the opener is not a Security+ 2.0 yellow learn button model requiring a digital wall station
- Inspect the two-conductor wall-control wire for staples, breaks, or corrosion
- Confirm whether the customer needs only open/close control or a multi-function console
- Disconnect opener power before working on control wiring
Professional Advisory
This is low-voltage control wiring, but power should still be disconnected before service. Do not bypass safety sensors or wall-control safety features to make an opener run.
Product Questions and Answers
Will 041A5577-1 work with a yellow learn button opener?
No, it is not intended for Security+ 2.0 yellow learn button openers manufactured after 2011 unless the manufacturer manual specifically says it is supported.
Does this control include light or lock buttons?
No. This is a basic push button control and does not provide the features of a multi-function wall console.
Can a bad wall button stop the opener from working?
Yes. A stuck or shorted wall button can cause control problems, but wiring and logic board issues should also be checked.
Is this a wireless wall button?
No. It is a wired wall-mounted push button control.
What should I check before ordering?
Check the opener model, learn button generation, and the type of wall control originally used with the opener.
