NICE / APOLLO 10039790, QUICK RELEASE FOR 7200/7300
The NICE Apollo 10039790 is a quick release component used on select Apollo 7200 and 7300 slide gate operator systems. A quick release allows the gate to be manually moved when the operator must be disengaged for service, power-loss response, emergency access, or mechanical troubleshooting. This is an important service component because a stuck, missing, or damaged release can make it difficult to move the gate safely when automation is not available. The part should be matched to the actual release hardware used on the operator, since release assemblies can vary by slide operator family and generation. This part is commonly listed for 7200/7300 applications, with broader Apollo slide operator references sometimes appearing in supplier listings. It should not be treated as a universal manual release for every Apollo operator without confirming fit.
This part is best ordered by the manufacturer part number and the operator parts diagram, not by appearance alone. Many Apollo slide and swing gate operators use similar covers, chains, brackets, and small service components, but the correct replacement can depend on operator model, cabinet generation, chain pitch, cable routing, mounting hole pattern, or release hardware. When the gate has been modified, rebuilt, or serviced with older Apollo parts, compare the original part and the model label before ordering.
Compatible With
Apollo 7200 slide gate operator; Apollo 7300 slide gate operator; select 7200ETL and 7300ETL service applications where 10039790 is specified. Some listings describe broader Apollo slide operator use, but the safest match is by model, release hardware, and parts diagram.
Features and Specifications
| Manufacturer | NICE / Apollo |
|---|
| Product Type | Quick release component |
|---|
| Part Number | 10039790 |
|---|
| Application | Manual release service part for select Apollo slide operators |
|---|
| Compatible Operator Type | Slide gate operator |
|---|
| Included Components | Quick release part/assembly; hardware contents should be confirmed by package |
|---|
| Notes | Release adjustment and gate movement should be checked by a qualified gate technician. |
|---|
Also Known As / Related Part Numbers
10039790, NICE-10039790, Apollo 10039790, quick release for 7200/7300, Apollo quick release, manual release assembly, slide operator release component
Technician Note
For slide operator chains and covers, inspect sprockets, mounting holes, chain alignment, debris buildup, and cabinet condition before replacing the part. For brackets and release parts, check the mounting geometry and any worn hardware that may have caused the original failure. Do not bypass safety devices or operate a gate with exposed moving parts after service.
Before Ordering
- Confirm the NICE Apollo part number on the original part or parts diagram.
- Match the operator model and generation before assuming compatibility.
- For chain parts, verify chain pitch, length, sprocket condition, and master link style.
- For covers and shrouds, compare mounting holes, cabinet style, cover length, and finish.
- For brackets or release parts, confirm mounting points, hardware, and operator geometry.
Professional Advisory
Gate operator repairs should be performed with power secured and with the gate safely supported. Electrical diagnosis, control-board service, and any repair involving unsafe gate movement should be handled by a qualified gate technician.
Product Questions and Answers
What does the 10039790 quick release do?
It allows the operator to be disengaged so the slide gate can be moved manually when needed for service or emergency access.
Which operators is it commonly listed for?
It is commonly listed for Apollo 7200 and 7300 slide gate operator applications.
Is it a universal Apollo manual release?
No. Match the release component to the operator model, release hardware, and parts diagram before ordering.
When should this part be replaced?
Replacement may be needed if the release is broken, missing, seized, badly worn, or no longer disengages the drive properly.
Should the gate be tested after replacing a quick release?
Yes. A technician should confirm the release engages and disengages correctly and that the gate moves safely without binding.
