NICE / APOLLO 10054190, BRKT, RAIL F/CIRCUIT BRD
The NICE Apollo 10054190 is a circuit board rail bracket used to support or mount a control board inside select Apollo control enclosures. This is the kind of small hardware part that matters during board replacement, enclosure repair, or retrofit work because the board must be held securely and spaced correctly away from metal surfaces, wiring, and moisture-prone areas. A missing or broken rail bracket can allow the control board to flex, move, short against the enclosure, or place strain on terminal wiring. Public listings confirm this part as a rail bracket for a circuit board, but they do not make it a universal Apollo board bracket for every operator. The correct use depends on the enclosure, board style, mounting hole pattern, and whether the operator has been converted or retrofitted. It should be matched to the part number in the Apollo/Nice parts diagram rather than chosen only because it looks similar to another board bracket.
Compatible With
NICE Apollo control box and circuit board mounting applications where part 10054190 is specified; commonly searched as rail bracket for circuit board. May be used with Apollo 1050-style board mounting or retrofit work only when the enclosure and bracket pattern match. Verify parts diagram before ordering.
Features and Specifications
| Manufacturer | NICE Apollo |
|---|
| Product Type | Circuit board rail bracket |
|---|
| Part Number | 10054190 |
|---|
| Application | Control board mounting rail/bracket service part for Apollo control enclosures |
|---|
| Compatible Operator Type | Automatic gate operator service part |
|---|
| Notes | Match by original part number, operator model, and parts diagram before ordering. |
|---|
Also Known As / Related Part Numbers
- 10054190
- NICE-10054190
- Apollo 10054190
- Nice Apollo 10054190
- BRKT Rail F/Circuit Brd
- Circuit Board Rail Bracket
- Control Board Rail Bracket
- Board Mounting Rail
Technician Note
Use non-conductive spacing and proper mounting hardware exactly as required by the operator. Loose control boards can cause intermittent faults and unsafe operation.
Before Ordering
- Confirm the operator model and series from the operator label.
- Compare the existing part number and physical part to the replacement.
- Check the operator parts diagram for the correct generation and mounting style.
- Inspect surrounding hardware for wear, corrosion, misalignment, or water damage.
- For electrical, control board, or unsafe gate movement issues, use a qualified gate technician.
Professional Advisory
Gate operator service parts should be selected by exact model, operator generation, and installed hardware. Similar-looking Apollo parts may use different mounting patterns, limit styles, gear ratios, or enclosure layouts. Do not bypass monitored safety devices or force a gate operator to run when the gate is binding, overtraveling, or moving unpredictably.
Important Ordering Warnings
- This bracket is not the control board and does not include electronics.
- Do not drill or improvise board mounts where wiring or enclosure clearance could be compromised.
Product Questions and Answers
What is the 10054190 bracket used for?
It is a rail bracket used for mounting or supporting a circuit board in select Apollo control box applications.
Does this include the circuit board?
No. This is mounting hardware only and does not include a 1050, 636, 635, or other control board.
Is it part of the 1050 retrofit kit?
It may be searched around board mounting and retrofit work, but the complete 1050 retrofit bracket kit is a separate item. Use 10054190 only where the parts diagram calls for it.
Can I use this bracket in any Apollo control box?
No. Match the enclosure, board style, mounting rail pattern, and original part number before ordering.
Why does board mounting matter?
A loose or incorrectly mounted board can flex, short, pull on wiring, collect moisture, or cause intermittent control problems.
