Nice Apollo 210 10W Solar Kit with Mounting Bracket
The Nice Apollo 210 is a 10 watt solar kit with a mounting bracket for compatible solar-friendly Apollo gate opener systems. It gives the operator battery system a solar charging source in locations where running AC power is not practical. A 10W panel is usually selected for lighter-use residential gate systems or for installations with modest daily cycle counts and good sun exposure. It is not a cure-all for weak batteries or an undersized solar design. Solar gate performance depends on several details working together: panel wattage, panel direction, shade, battery capacity, control-board charging circuit, standby accessory load, and how often the gate cycles. This kit should be matched to the operator manual and actual site demand. When used correctly, it helps maintain the battery system and supports off-grid gate operation without placing the panel directly into the battery circuit without the proper charging setup.
Compatible With
- Compatible Nice Apollo solar-friendly gate openers.
- Selected Apollo low-voltage swing and slide gate operator systems that support external solar charging.
- Remote gate installations using a properly matched battery and charge-control setup.
- May be used with Apollo 12V solar charging systems where a 10W panel is specified.
- Commonly searched with Apollo 201, 208, 210, and 212 solar accessory references.
Verify the required solar panel wattage in the operator manual. Higher cycle counts, shade, larger gates, and added accessories may require more solar capacity.
Features and Specifications
| Manufacturer | Nice Apollo |
|---|
| Product Type | Solar panel kit |
|---|
| Part Number | 210 |
|---|
| Solar Panel Output | 10 watt nominal |
|---|
| Application | Solar charging for compatible Apollo gate operator battery systems |
|---|
| Included Components | Solar panel and mounting bracket |
|---|
| Voltage | Commonly used in 12V solar gate operator charging applications |
|---|
| Notes | Solar sizing depends on gate use and sun exposure |
|---|
Also Known As / Related Part Numbers
- 210
- Apollo 210
- Nice Apollo 210
- AP210
- 10W solar kit
- 10 watt solar panel with bracket
Technician Note
Panel placement matters. A small shaded area on the panel can reduce charging performance enough to create battery complaints, especially on gates with high accessory draw.
Before Ordering
- Confirm the operator manual allows a 10W solar panel.
- Check whether the system needs one panel or multiple panels.
- Inspect battery age and condition before adding solar parts.
- Make sure the mounting location gets full sun for the expected season.
- Confirm the charging controller and wiring are correct for the operator.
Important Ordering Warnings
Do not connect solar panels directly to gate batteries unless the operator or charge controller is designed for that wiring method.
Professional Advisory
Gate operator parts should be matched by the operator model, part number, voltage, connector style, and installed accessory layout. For electrical diagnosis, safety-device issues, or unsafe gate movement, use a qualified gate technician. Do not bypass required safety devices to make an operator run.
Product Questions and Answers
Is Apollo 210 a complete gate opener power system?
No. It is a 10W solar panel kit with bracket for compatible solar-ready gate operator battery systems.
Will a 10W panel run a high-cycle gate?
Usually not by itself. High cycle counts, shade, accessories, and large gates may require more solar capacity.
Does this replace the battery?
No. The solar kit charges the battery system; it does not replace the operator battery or batteries.
Can this be added to any Apollo gate opener?
Only if the operator supports solar charging and the panel size matches the system requirements.
What should I check before installing it?
Check sun exposure, panel direction, battery condition, charge controller setup, and the operator manual.
