NICE / APOLLO A2032, CONNECTOR, MOLEX, 8 PIN, WHITE - INCLUDES CONNECTOR AND 8 WIRE TERMINALS
The Nice Apollo A2032 is a white 8-pin Molex connector supplied with wire terminals for compatible Apollo gate automation wiring repairs. It is commonly used when an actuator or control-box harness connector is broken, corroded, loose, missing, or damaged during service. Connector problems can create intermittent actuator movement, limit errors, motor output problems, or unreliable accessory wiring depending on where the connector is used. This part should be matched to the original connector body, pin count, terminal style, and wiring diagram before installation. It is not a complete harness and does not correct a failed control board, motor, or actuator by itself. Use careful pin mapping when replacing connectors so wires return to the correct positions.
Compatible With
- Nice Apollo wiring repairs that call for A2032 or 2032 white 8-pin Molex connector
- Compatible Apollo actuator pigtail and harness service applications using an 8-pin Molex style connector
- Apollo control-box wiring repairs where the parts diagram lists the A2032 connector and terminals
- Related Apollo actuator arm wiring assemblies that use matching 8-pin connector geometry
- Commonly searched with Nice Apollo gate arm pigtail wire and Molex connector references such as 10016390, when the wiring configuration matches
Features & Specifications
| Manufacturer | Nice Apollo |
|---|
| Product Type | 8-pin Molex connector with terminals |
|---|
| Part Number | A2032 |
|---|
| Application | Actuator/control wiring connector repair |
|---|
| Compatible Operator Type | Compatible Nice Apollo gate automation wiring harnesses and actuator connections |
|---|
| Common Service Area | Electrical connector / wiring harness service |
|---|
| Notes | Includes white 8-pin connector and 8 wire terminals in common listings. |
|---|
Also Known As / Related Part Numbers
- A2032
- 2032
- Nice Apollo A2032
- Apollo A2032
- 2032
- white 8 pin Molex connector
- 8-pin Molex plug
- connector and 8 wire terminals
- Apollo 2032 connector
- related 10016390 gate arm pigtail wire with Molex connector
- not the same as a complete actuator harness
Technician Note
When replacing a connector, document the wire positions before removing the old body. Reversing wires or mixing pin locations can damage electronics or cause unsafe operation.
Before Ordering
- Confirm the existing connector is an 8-pin white Molex style connector.
- Record the wire colors and pin positions before disassembly.
- Inspect the mating connector and harness for corrosion or heat damage.
- Verify whether a complete harness or pigtail is needed instead of the connector body.
- Use a qualified technician for wiring repairs if the system has unknown or damaged wiring.
Professional Advisory
Gate operator parts should be installed with power disconnected and the gate secured against movement. Actuator repairs can affect travel limits, force, and safe gate movement. For electrical diagnosis, internal actuator service, or any unsafe gate condition, use a qualified gate technician. Do not bypass photo eyes, safety edges, alarms, or other required safety devices.
Important Ordering Warning
A2032 is a connector service part. Incorrect pinning or wiring can damage the operator or create unsafe gate movement.
Product Questions & Answers
What comes with A2032?
Common listings describe A2032 as a white 8-pin Molex connector with 8 wire terminals.
Is this a complete wiring harness?
No. It is the connector and terminals, not a complete actuator harness or control-box harness.
What should I check before replacing the connector?
Check pin count, connector shape, terminal style, wire positions, and the mating plug condition.
Can a bad connector cause intermittent gate operation?
Yes. Loose or corroded connector pins can cause intermittent motor, limit, or control signals.
Can I guess the wire positions?
No. Wire positions should be documented and matched to the wiring diagram. Guessing can damage parts or cause unsafe operation.
