The Nice Apollo SPEG019A00A transformer group is the 230V power transformer assembly for compatible M-Bar and L-Bar barrier operators. In these operators, the transformer group takes the incoming mains voltage and supplies the lower operating voltages needed by the control system and internal components. This row must be handled carefully because Nice offers separate transformer group assemblies for different input voltages. SPEG019A00A is the 230V assembly; the 120V version is SPEG019B00A. Installing the wrong transformer group can damage the control system immediately. This part is commonly used with M3BAR, M5BAR, M7BAR, and LBAR style operators only when the operator is configured for 230V input power.
Always verify the building supply voltage with a meter and confirm the original transformer label. A 230V and 120V transformer group may look similar but they are not interchangeable.
Power transformer replacement is not a low-voltage accessory installation. Incorrect wiring or wrong-voltage parts can damage the barrier and create an electrical hazard.
SPEG019A00A is the 230V transformer group assembly for compatible Nice Apollo M-Bar and L-Bar barrier operators.
It is commonly associated with M3BAR, M5BAR, M7BAR, and LBAR barrier operator families when the site uses 230V input power.
No. SPEG019A00A is the 230V version. SPEG019B00A is the 120V version.
No. Use the transformer assembly that matches the site mains voltage and operator electrical configuration.
Yes. This part involves incoming power and should be installed by a qualified technician or electrician.
