Nice Apollo WA10 Red Adhesive Reflector Strips for M-BAR and L-BAR Arms, 24 Pack
The Nice Apollo WA10 kit is a 24-piece pack of red adhesive reflector strips used on barrier gate arms. These strips help make the lowered arm easier to see from a vehicle approach, especially in parking lots, gated communities, commercial entries, and other traffic-control lanes.
Reflector strips are a simple accessory, but correct selection still matters. WA10 is intended for compatible Nice Apollo barrier arm systems and should be matched to the arm type and operator family. The strips do not replace illuminated arm kits, traffic lights, safety sensors, or proper signage, but they are a practical visibility upgrade for many M-BAR and L-BAR installations.
Compatible With
Use the list below as a fitment guide. Similar Nice Apollo barrier and slide gate parts can look alike, so the original part number, operator model, arm profile, and parts diagram should be checked before ordering.
- Select Nice Apollo M-BAR barrier arm systems
- Select Nice Apollo L-BAR barrier arm systems
- Nice Apollo M3BAR, M5BAR, M7BAR, and LBAR arm applications when the arm profile accepts WA10 strips
- SINGO4 and SINGO6 barrier gate operators where WA10 reflector strips are specified
- Compatible barrier boom arms that use adhesive reflective strip accessories
- Not a replacement for XBA4, XBA6, XBA18 LED strips, traffic lights, or monitored safety devices
Features and Specifications
| Manufacturer | Nice Apollo |
|---|
| Product Type | Adhesive reflector strip kit |
|---|
| Part Number | WA10 |
|---|
| Application | Barrier arm visibility accessory |
|---|
| Compatible Operator Type | Select M-BAR, L-BAR, SINGO4, and SINGO6 barrier systems |
|---|
| Included Components | 24 red adhesive reflector strips per pack |
|---|
| Voltage | None - passive adhesive visibility accessory |
|---|
| Material / Finish | Red reflective adhesive material |
|---|
| Notes | Clean the arm surface before installation for proper adhesion |
|---|
Also Known As / Related Part Numbers
- WA10
- NICE-WA10
- NIC-WA10
- HYS-WA10
- Nice WA10
- Apollo WA10
- red adhesive reflector strips
- red reflective strips
- barrier arm reflector strips
- 24 piece reflector strip pack
Technician Note
Reflective strips work best when the arm surface is clean, dry, and free of wax, grease, chalking paint, and old adhesive. If strips keep peeling off, inspect the arm finish and replace damaged arm sections before applying new strips.
Before Ordering Checklist
- Confirm the barrier arm is an M-BAR, L-BAR, SINGO4, SINGO6, or other supported arm profile.
- Count the number of strips needed for the arm length and desired visibility coverage.
- Clean and dry the barrier arm surface before applying adhesive strips.
- Replace damaged, faded, peeling, or missing reflectors as part of routine barrier arm maintenance.
- Do not treat reflector strips as a substitute for required safety sensors or traffic-control lighting.
Important Ordering Warnings
WA10 improves visibility only. It does not provide obstruction detection, entrapment protection, traffic signaling, or UL 325 monitored safety compliance.
Professional Advisory
Barrier gate operators and slide gate operators can move heavy hardware and may include monitored safety devices, springs, drive components, and line-voltage wiring. For electrical diagnosis, unstable arm movement, damaged gate hardware, or missing safety protection, use a qualified gate technician.
Product Questions and Answers
How many reflector strips come in the WA10 pack?
WA10 is commonly listed as a 24-piece pack of red adhesive reflector strips.
Does WA10 fit both M-BAR and L-BAR arms?
Yes, WA10 is commonly associated with select Nice Apollo M-BAR and L-BAR barrier arm systems.
Can WA10 be used with SINGO barrier operators?
Some references list WA10 for SINGO4 and SINGO6 barrier gate operators. Check the arm profile and parts diagram before ordering.
Do these strips require wiring?
No. WA10 strips are adhesive reflective accessories and do not require wiring or power.
Are reflector strips the same as LED arm lights?
No. Reflector strips are passive visibility strips. LED arm light kits are separate powered accessories with different part numbers and installation requirements.
