Nice Apollo WA12R01 Arm Mount Stand for Combined Barrier Arms
The Nice Apollo WA12R01 is an arm mount stand for combined barrier arm systems. It is used where a longer barrier arm assembly is built from multiple arm sections and needs additional stand support to maintain proper alignment and movement.
This is the newer reinforced style of the WA12R01 stand and is commonly referenced for longer combined barrier arms. Because combined arms place different loads on the operator head and support hardware, the correct stand, pivot bracket, spring balance, and arm section combination must be verified together rather than selected as separate universal parts.
Compatible With
Use the list below as a fitment guide. Similar Nice Apollo barrier and slide gate parts can look alike, so the original part number, operator model, arm profile, and parts diagram should be checked before ordering.
- Select Nice Apollo M-BAR combined barrier arm installations
- Select Nice Apollo L-BAR combined barrier arm installations
- Combined arm configurations with overall lengths commonly listed from 16 ft 5 in to 27 ft 3 in when approved by the operator guide
- Barrier systems using compatible XBA modular aluminum arm sections and approved support hardware
- May be used with WA11, XBA10, XBA11, XBA14, XBA15, XBA16, or XBA17 related arm hardware when the complete system design calls for them
- Not intended for unsupported short-arm installations or non-compatible barrier operator families
Features and Specifications
| Manufacturer | Nice Apollo |
|---|
| Product Type | Arm mount stand / combined arm support |
|---|
| Part Number | WA12R01 |
|---|
| Application | Combined long barrier arm support |
|---|
| Compatible Operator Type | Select Nice M-BAR and L-BAR barrier systems |
|---|
| Supported Arm Length Reference | Commonly listed for combined arms from 16 ft 5 in to 27 ft 3 in; verify complete configuration |
|---|
| Voltage | None - mechanical support accessory |
|---|
| Included Components | Arm mount stand assembly unless supplier package states otherwise |
|---|
| Notes | Newer reinforced version in many current listings |
|---|
Also Known As / Related Part Numbers
- WA12R01
- NICE-WA12R01
- NIC-WA12R01
- Nice WA12R01
- Apollo WA12R01
- WA12 arm mount stand
- WA12R01 reinforced arm mount stand
- stand arm mount for combined BGO
- combined barrier arm stand
Technician Note
Long combined barrier arms should be treated as a complete system. The stand, arm sections, pivot hardware, spring setting, operator model, and safety layout all affect performance and service life.
Before Ordering Checklist
- Confirm the total combined arm length before ordering.
- Verify the barrier operator model and arm section part numbers.
- Check whether the installation also requires a pivot, breakaway, or low-headroom bracket.
- Confirm spring balance and operator capacity for the finished arm length.
- Review lane width and vehicle clearance so the stand does not create an impact point.
Important Ordering Warnings
Do not add WA12R01 to extend an arm beyond the approved rating of the operator. Oversized or poorly balanced arms can damage the operator and create unsafe movement.
Professional Advisory
Barrier gate operators and slide gate operators can move heavy hardware and may include monitored safety devices, springs, drive components, and line-voltage wiring. For electrical diagnosis, unstable arm movement, damaged gate hardware, or missing safety protection, use a qualified gate technician.
Product Questions and Answers
What is WA12R01 used for?
WA12R01 is an arm mount stand for select combined barrier arm installations, especially longer multi-section arm layouts.
What arm lengths is WA12R01 commonly associated with?
Listings commonly reference combined arm lengths from 16 ft 5 in to 27 ft 3 in, but the final approved length depends on the operator and arm configuration.
Is WA12R01 the same as WA11?
No. WA11 is an adjustable support stand for barrier arms. WA12R01 is an arm mount stand for combined arm configurations.
Can this be used on any barrier operator?
No. It should be used only on compatible Nice Apollo barrier systems where the parts diagram and installation layout call for WA12R01.
Does this stand include the barrier arm?
No. The stand is a support/mounting accessory. Barrier arms, pivots, breakaway hardware, and LED kits are separate unless a supplier package states otherwise.
