SES KCR Rubber Keypad Cover for SES Telephone Keypads
The SES KCR is a rubber keypad cover used on Select Engineered Systems telephone entry keypads where the existing cover has become worn, cracked, loose, faded, or damaged from outdoor exposure. The keypad cover is a small but important service part because it helps protect the keypad face from daily use, sunlight, moisture, and dirt while keeping the buttons readable and easier to press. On shared-entry systems, a failed keypad cover can make a good telephone entry panel look neglected and can also allow more moisture and debris to reach the keypad area. Replacing the cover can be a practical maintenance repair when the underlying keypad and electronics still operate correctly. Because SES has made multiple keypad styles over the years, the cover should be matched to the actual keypad layout rather than ordered only by brand name.
Compatible With
Commonly associated with Select Engineered Systems telephone keypad applications and listed broadly as a rubber keypad cover for telephone keypads. Use with compatible SES TEC, CAT, SG, SAT, Advantage, or related SES keypad faces only when the keypad dimensions and button layout match the KCR cover.
Features and Specifications
| Manufacturer | Select Engineered Systems (SES) |
|---|
| Product Type | Rubber keypad cover |
|---|
| Part Number | KCR |
|---|
| Application | Replacement protective keypad cover for SES telephone keypad faces |
|---|
| Compatible Equipment | Select SES telephone keypads where cover layout matches |
|---|
| Included Components | Rubber keypad cover only |
|---|
| Installation Notes | Match the existing SES model, harness, panel opening, gasket, and mounting pattern before installation. |
|---|
Also Known As / Related Part Numbers
- KCR
- SES-KCR
- SES KCR
- Rubber Keypad Cover
- Keypad Cover - Rubber
- ER286980 - related catalog reference found in some price lists
- 936248 - supplier related number found in some listings
Technician Note
A keypad cover will not repair failed keypad contacts, broken ribbon cables, or controller problems. If numbers do not register consistently after the cover is removed, the keypad assembly itself may need service.
Before Ordering
- Compare the old cover shape and button layout.
- Inspect the keypad below the cover for wear or water damage.
- Confirm whether the repair requires the cover only or a complete keypad assembly.
- Check that the cover seats properly and does not interfere with key travel.
- Do not use adhesive or sealing methods that trap water inside the keypad area.
Important Ordering Warning
A cover that does not match the keypad layout can hold buttons down or leave gaps around the keypad face. Match the physical keypad before installation.
Professional Advisory
For electrical work inside an access-control or telephone entry cabinet, use a qualified gate/access-control technician when wiring, power, grounding, or weather sealing is uncertain. Do not bypass required safety or access-control devices to make a system operate.
Product Questions and Answers
Is KCR a complete keypad?
No. KCR is the rubber keypad cover only, not the electronic keypad assembly or controller.
When should the cover be replaced?
Replace it when the cover is cracked, missing, badly faded, loose, or allowing moisture and dirt around the keypad.
Will it fix buttons that do not work?
Only if the issue is the cover interfering with the buttons. If the keypad contacts or wiring are bad, the keypad itself may need replacement.
Can this cover be used on any brand?
No. It is intended for compatible SES keypad applications and should be matched by layout and size.
Should the enclosure be checked during cover replacement?
Yes. A damaged cover can be a sign that the keypad area has been exposed to water or debris, so inspect the panel before closing it.
