SES PSTAT101, PEDESTAL MOUNT ADAPTER (FOR TEC1)
The SES PSTAT101 is a dedicated pedestal mount adapter for TEC1 applications. In practical terms, it is the plate used when a TEC1 telephone entry system or related TEC1 weather hood needs to be mounted on a compatible SES pedestal rather than on a wall or flush-mount surface.
This part matters because SES pedestals and entry units do not all share one universal bolt pattern. A pedestal may be the correct height and style, but the entry unit still needs the correct adapter to sit securely and line up properly. SES literature identifies PSTAT101 compatibility with TEC1 and also shows the adapter used with SES PST236 and PST242 pedestals.
Do not confuse PSTAT101 with PSTATAC. PSTATAC is tied to TEC2, TEC4, CAT2, CAT4, and certain weather hoods, while PSTAT101 is the TEC1 adapter reference. Matching the adapter prevents loose mounting, water intrusion around the housing, or field modification of the pedestal.
Compatible With
- Select Engineered Systems TEC1 telephone entry systems
- Select TEC1 weather hood applications including WHT1 and WHLT1 where the adapter is specified
- SES PST236 curb-level pedestal
- SES PST242 street-level pedestal
- Related pedestal family references where adapter documentation specifically allows it
- Not a replacement for PSTATAC on TEC2, TEC4, CAT2, or CAT4 units
Features and Specifications
| Manufacturer | Select Engineered Systems |
|---|
| Product Type | Pedestal mount adapter |
|---|
| Part Number | PSTAT101 / SES-PSTAT101 |
|---|
| Application | Mounting TEC1 equipment to compatible SES pedestals |
|---|
| Compatible Series | TEC1 |
|---|
| Related Pedestals | PST236 and PST242 references |
|---|
| Approximate Shipping Weight | Commonly listed around 6 lb |
|---|
| Notes | Not the same adapter as PSTATAC |
|---|
Also Known As / Related Part Numbers
- PSTAT101
- SES-PSTAT101
- SelectSES PSTAT101
- TEC1 pedestal adapter
- pedestal mount adapter for TEC1
- PST236 related pedestal
- PST242 related pedestal
- WHT1 related hood
- WHLT1 related hood
- PSTATAC related but different adapter
Technician Note
If the entry unit is a TEC2, TEC4, CAT2, or CAT4, this is usually not the correct adapter. Check the model label inside the unit before ordering.
Before Ordering
- Verify the entry unit is a TEC1 model.
- Confirm the pedestal is a compatible SES pedestal such as PST236 or PST242 where specified.
- Check whether a weather hood is being used and which hood model is installed.
- Compare the bolt pattern with the old adapter if replacing one.
- Do not drill or modify the entry housing unless approved by the manufacturer or installer.
Professional Advisory
Pedestal adapters should hold the access-control housing securely without stressing the faceplate or pulling on wiring. If the old adapter was modified in the field, confirm the correct factory adapter before replacing the telephone entry unit.
Product Questions
What does the PSTAT101 adapter fit?
It is primarily used for SES TEC1 pedestal mounting and related TEC1 weather hood applications where the adapter is specified.
Does PSTAT101 fit TEC2 or CAT units?
No. TEC2, TEC4, CAT2, and CAT4 applications are generally associated with the PSTATAC adapter, not PSTAT101.
Can this be used with a PST242 pedestal?
Yes, SES literature lists PSTAT101 as compatible with the PST242 pedestal for TEC1 mounting.
Is this a complete pedestal?
No. PSTAT101 is the adapter plate only. The pedestal, telephone entry unit, weather hood, wiring, and anchors are separate.
Why is the adapter important?
It aligns the enclosure to the pedestal and helps avoid loose mounting, poor fitment, and field-drilled holes that can create water-entry or service issues.
