SES RHRFVFR Code Reader with LED Display
The SES RHRFVFR is a code reader with an LED display used as a field tool for identifying access credentials and transmitter codes on supported Select Engineered Systems installations. For a property manager or service technician, the practical value is that it can help read prox card numbers, RF transmitter numbers, and read-distance behavior without guessing at the code printed on an old credential or trying to enroll unknown devices blindly.
This item is commonly used around SES stand-alone RF controller and Select Gate style access-control installations where transmitters or prox credentials need to be checked before programming. It does not replace a controller, receiver, keypad, or telephone entry board. It is best treated as a diagnostic and enrollment-support tool that helps confirm what the existing credential is sending and whether the reader/transmitter combination is working at the expected distance.
Correct fitment matters because SES access-control products may use different reader technologies, Wiegand formats, RF transmitter families, and site-code settings. Before ordering, match the RHRFVFR to the controller and credential family being serviced, especially on older systems where model numbers, faceplate labels, and installed boards may not match newer product listings.
Compatible With
- Select Engineered Systems SPRFC1 RF stand-alone controller applications where supported
- Select Engineered Systems SPRFC1WR weather-resistant RF controller applications where supported
- SES Select Gate / Select Gate II access-control installations using supported RF transmitter or prox credential identification
- SES service work where a prox card number, transmitter number, or read distance must be identified before programming
- Compatible SES RF/proximity credential families only when the installed system supports the same credential technology and format
- Not a universal HID, AWID, keypad, or telephone-entry controller replacement
Features and Specifications
| Manufacturer | Select Engineered Systems |
|---|
| Product Type | Code reader / credential finder with LED display |
|---|
| Part Number | RHRFVFR |
|---|
| Application | Reading supported prox card and transmitter numbers and checking read distance |
|---|
| Compatible Operator Type | Access-control and telephone-entry systems using compatible SES credential interfaces |
|---|
| Security Technology | Depends on connected SES credential and controller family |
|---|
| Display | LED display |
|---|
| Notes | Service tool only; verify controller and credential format before ordering |
|---|
Also Known As / Related Part Numbers
- RHRFVFR
- SES-RHRFVFR
- RH RF VFR
- Code Finder
- Code Reader with LED Display
- SPRFC1
- SPRFC1WR
- Select Pass RF Controller references
- SES RF stand-alone controller related accessory
Technician Note
Use the RHRFVFR as a credential-identification and troubleshooting aid. It is especially useful when old cards or transmitters are still working but the code information is missing from the site records.
Before Ordering Checklist
- Confirm the installed SES controller or RF receiver family
- Confirm the credential type being read, such as RF transmitter or proximity card
- Verify this is a service reader/finder tool, not a controller or relay board
- Check whether the system uses site codes, Wiegand data, or SES-specific RF programming
- Compare the original part number or service requirement before ordering
Professional Advisory
Credential programming and access-control troubleshooting should be handled by qualified personnel when the system controls vehicle gates, doors, or restricted areas. Do not bypass access-control or safety equipment to make a credential work.
Important Ordering Warnings
- Not a universal card reader replacement
- Not a gate opener receiver by itself
- Credential format must be verified before ordering
Product Questions and Answers
Is the SES RHRFVFR a complete access controller?
No. The RHRFVFR is a code reader/finder tool used to identify supported card or transmitter numbers and read distance. It does not replace the gate controller, relay board, or telephone entry unit.
What SES products is this reader commonly associated with?
It is commonly associated with SES RF stand-alone controller applications such as SPRFC1 and SPRFC1WR, and with Select Gate style service work where credential numbers need to be identified.
Can this read every access card or remote?
No. It should be used only with compatible SES-supported transmitter or proximity credential technology. Card format, site code, and RF technology must be verified.
Why would a technician use this tool?
A technician may use it to identify unknown transmitter or card numbers, check whether a credential is being read, and confirm useful read distance before programming a controller.
What should be checked before ordering?
Verify the existing SES controller model, credential technology, RF/prox format, and whether the job calls for a reader/finder tool rather than a replacement controller.
