SES RPCR, BLACK ABS CRADLE WITH SLOT, CAT/TEC SH
The SES RPCR is the replacement black ABS phone cradle used on compatible Select Engineered Systems CAT and TEC standard-handset telephone entry units. The cradle is a small part, but it matters in daily operation because it holds the handset in the correct rest position and helps keep the front of the entry unit neat, usable, and less vulnerable to damage. When a cradle is cracked or worn, the handset may hang loosely, fall from the panel, stress the cable, or fail to sit correctly after a visitor call. On some handset-style entry units, the cradle area can also affect how the unit senses the handset position, so a broken cradle should not be ignored. RPCR should be selected for CAT/TEC standard-handset applications where the physical cradle style matches the existing cabinet. It is separate from RPHS24, RPHS36, and RPHS48 handset assemblies, so replacing the cradle will not repair a damaged cord or handset body. When servicing the unit, check the handset cable, hook area, faceplate hardware, and cabinet condition at the same time.
Compatible With
This SES replacement part is commonly associated with the following applications when the original unit, cabinet, display, handset, lock, or parts diagram matches:
- SES CAT Series standard handset telephone entry models
- SES TEC Series standard handset telephone entry models
- CAT/TEC SH units using the black ABS slotted handset cradle style
- Service replacements where the cradle is cracked, missing, worn, or no longer supports the handset
- Not a handset, audio board, display, or complete telephone entry replacement
Features & Specifications
| Manufacturer | Select Engineered Systems (SES) |
|---|
| Product Type | Replacement Handset Cradle |
|---|
| Part Number | SES-RPCR |
|---|
| Common Short Part Number | RPCR |
|---|
| Application | CAT / TEC standard handset telephone entry panels |
|---|
| Compatible Product Family | SES telephone entry / access control service parts as listed below |
|---|
| Included Components | Replacement part only as identified by the listing; verify hardware, gasket, cable, or key set contents before installation |
|---|
| Notes | Match by exact SES model, installed part number, lock code, display style, cable length, or parts diagram before ordering |
|---|
Also Known As / Related Part Numbers
Use these references for cross-checking and search purposes. Similar SES numbers may be related by product family but should not be treated as exact replacements unless the installed part and parts diagram match.
- SES-RPCR
- RPCR
- RP CR
- SES phone cradle
- CAT TEC handset cradle
- black ABS cradle with slot
- Select Engineered Systems RPCR phone cradle
Technician Note
SES telephone entry and access-control parts should be matched by the exact model family and installed hardware. Similar-looking displays, windows, handsets, cradles, keys, and lock parts may fit different TEC, TEC1A, CAT, SAT, SG2, SG3, or Select Gate products. When a field unit has been repaired before, check the actual installed part rather than relying only on the original product family.
Before Ordering
- Confirm the SES model number and product family from the existing panel.
- Match the original part number, key code, display style, window opening, handset cable length, or cradle style.
- Inspect the cabinet for moisture, corrosion, impact damage, altered locks, or missing hardware.
- For displays and audio parts, check the harness, connector, power, and main board before assuming one part has failed.
- For keys, confirm the key number on the lock or existing key because field-replaced locksets may use a different code.
Professional Advisory
If this part is being installed on an entry system connected to an automatic gate, door lock, relay, phone line, cellular interface, or access-control panel, service should be performed by a qualified gate or access-control technician. Do not bypass safety devices, emergency access equipment, monitored gate inputs, or required entrapment protection while troubleshooting the entry system.
Product Questions & Answers
What does the RPCR part replace?
RPCR replaces the black ABS phone cradle on compatible SES CAT and TEC standard-handset telephone entry units.
Does RPCR include the handset?
No. RPCR is the cradle only. The handset and cable are separate parts such as RPHS24, RPHS36, or RPHS48.
Can a broken cradle affect operation?
Yes. A broken cradle can let the handset hang loose, stress the cable, or prevent the handset from resting properly in the unit.
Is this for speakerphone-style SES panels?
No. It is for compatible standard-handset CAT/TEC units, not speaker-only telephone entry panels.
What should be checked before ordering?
Confirm the SES model, standard-handset layout, cradle shape, mounting points, and whether the handset or cable also needs replacement.
