SES RPKPT1A Replacement Keypad for TEC1A Series
The SES RPKPT1A is the replacement keypad for Select Engineered Systems TEC1A series telephone entry units. The TEC1A family is a perimeter access-control telephone entry platform with display-based entry operation, PIN capability, relay control, and multiple system capacities depending on the model. The keypad is the customer-facing input point for directory navigation, dialing codes, PIN entry, and basic panel interaction, so a worn or failing keypad can create daily access problems even when the controller and telephone-entry electronics still function. This replacement keypad is intended for service situations where the TEC1A keypad is physically damaged, no longer responding reliably, or no longer sealing properly at the front panel. Fitment should be verified by the TEC1A model and the original keypad assembly, because TEC1A parts are not automatically the same as older TEC1/TEC2/CAT/SG keypad parts.
Compatible With
Compatible with Select Engineered Systems TEC1A series telephone entry units that use the RPKPT1A replacement keypad. Commonly associated with TEC1A 2-line and 4-line models and TEC1A Basic, Deluxe, and Premium style systems where the original keypad part matches RPKPT1A.
Features and Specifications
| Manufacturer | Select Engineered Systems (SES) |
|---|
| Product Type | Replacement keypad |
|---|
| Part Number | RPKPT1A |
|---|
| Application | Keypad service part for TEC1A telephone entry panels |
|---|
| Compatible Equipment | SES TEC1A / T1A series where RPKPT1A is specified |
|---|
| Included Components | Replacement keypad assembly; verify connector and gasket |
|---|
| Installation Notes | Match the existing SES model, harness, panel opening, gasket, and mounting pattern before installation. |
|---|
Also Known As / Related Part Numbers
- RPKPT1A
- SES-RPKPT1A
- Replacement Keypad for T1A Series
- TEC1A keypad
- T1A keypad
- TEC1A replacement keypad
Technician Note
If the TEC1A display, phone communication, or relay output is also malfunctioning, test the system before assuming the keypad is the only failed component. Keypad failure and controller failure can look similar to the end user.
Before Ordering
- Confirm the installed unit is TEC1A / T1A series.
- Match the old keypad connector and mounting style.
- Check for water marks inside the panel before replacing the keypad.
- Verify whether a display window or keypad cover is also needed.
- Keep this separate from RPKPTEC/CAT and RPKPTECBLUE keypad retrofit parts.
Important Ordering Warning
RPKPT1A is a TEC1A series keypad reference. It should not be treated as a universal replacement for all SES TEC or CAT keypads.
Professional Advisory
For electrical work inside an access-control or telephone entry cabinet, use a qualified gate/access-control technician when wiring, power, grounding, or weather sealing is uncertain. Do not bypass required safety or access-control devices to make a system operate.
Product Questions and Answers
What system does RPKPT1A fit?
It is listed as the replacement keypad for the TEC1A / T1A series.
Is TEC1A the same as TEC1?
No. The names are similar, but TEC1A and TEC1 parts should be verified separately by model and parts diagram.
Can a keypad failure stop PIN access?
Yes. If keypad presses do not register correctly, PIN access and directory control can become unreliable.
Does this include the display?
No. This is a keypad part, not the LCD display or display window.
Should the panel be programmed again after keypad replacement?
Usually keypad replacement should not erase programming, but the system should be tested after service to confirm PIN, directory, and relay operation.
