SES RPLK1 Standard Cam Lockset with 325 Keys for SAT SG2 and TEC Panels
The SES RPLK1 is a standard cam lockset used on supported Select Engineered Systems telephone entry cabinets. It provides controlled service access to the cabinet door while keeping the access-control electronics, keypad, display, relay wiring, and telephone entry components protected from unauthorized opening.
This lockset is commonly replaced after key loss, lock cylinder wear, forced access, weather damage, or cabinet service work. Because SES cabinet locksets can look similar across generations, the standard cam and 325 key marking should both be confirmed before ordering.
Compatible With
- Select SES SAT telephone entry applications using the standard cam 325-key lockset
- Select SES SG2 applications using the standard cam 325-key lockset
- Select SES TEC2, TEC4, and TEC10 applications using the standard cam 325-key lockset
- Not the small cam RPLK1A used on TEC1s applications
- Not the same as tubular screwdown CAT locksets or SG3 2400-key tubular locksets
Features & Specifications
| Feature | Specification |
|---|
| Manufacturer | Select Engineered Systems (SES) |
| Product Type | Replacement cabinet lockset |
| Part Number | SES-RPLK1 |
| Application | Telephone entry and access-control cabinet service access |
| Compatible Series | Select SAT, SG2, TEC2, TEC4, and TEC10 applications |
| Key Marking | 325 |
| Cam Style | Standard cam |
| Included Components | Lockset with 325 keys |
| Notes | Confirm cam style before ordering |
Also Known As / Related Part Numbers
- SES-RPLK1
- RPLK1
- RPLK1-599
- Lockset with standard cam and 325 keys
- RPKEY325 - related 325 key set
- RPLK1A - related small cam lockset, not the same cam style
Technician Note
Use the old lock as the guide. If the replacement cam is too short, too long, or shaped differently, the cabinet may close but not secure properly. If the cabinet has been forced open, correct the door and latch fit before replacing the lock.
Before Ordering
- Match the SES part number printed on the service label or parts list.
- Confirm the original cam style, lock orientation, and key marking before ordering.
- Check whether the cabinet uses a standard cam, small cam, round black lockset, tubular cam lock, or screwdown style lock.
- Inspect the door, latch area, gasket, and enclosure for bending or corrosion that may keep the new lock from working correctly.
- Do not assume a similar SES lockset with a different key number is interchangeable.
Professional Advisory
For multi-tenant communities, commercial properties, and HOA gate systems, lock replacement should be handled so the correct authorized keys remain controlled. If the enclosure is damaged, corroded, forced open, or no longer seals correctly, have the entry system checked by a qualified access-control technician before putting the unit back in service.
Questions & Answers
What is the SES RPLK1 used for?
The SES RPLK1 is a standard cam lockset with 325 keys for select SAT, SG2, TEC2, TEC4, and TEC10 telephone entry applications.
How is RPLK1 different from RPLK1A?
RPLK1 uses a standard cam, while RPLK1A uses a small cam for TEC1s applications. They should not be swapped without confirming the cabinet and cam style.
Does this lockset include keys?
Yes. This lockset is supplied with 325 keys, but the quantity and packaging should be confirmed against current supplier inventory if that detail is critical.
Will RPLK1 fit every SES telephone entry cabinet?
No. It is for listed SES applications that use the standard cam 325-key lockset. CAT, SG3, TEC1, and screwdown-style cabinets may use different lock hardware.
What should be checked before replacing the lock?
Check the old lockset part number, cam style, key marking, cabinet door alignment, and whether the enclosure has been bent or damaged.
