SES SWRS485EXTPM, SELECT WIRELESS RS485 ENCLOSURE MOUNTING HARDWARE
The SES SWRS485EXTPM is the exterior pole-mount hardware kit used with the Select Wireless RS485 Mesh enclosure installation. In the field, this type of hardware is used when the wireless RS485 enclosure has to be mounted to a pole or post instead of a flat wall, cabinet backplate, or building surface.
This item supports the physical installation of the SES wireless RS485 enclosure. It does not provide wireless communication by itself, does not include a CAT controller, and does not replace the SWRS485MESH or SWRS485EXTENCL transceiver assembly.
Correct ordering depends on the mounting method. If the site has a SWRS485EXTENCL enclosure that needs to be secured to a pole, this is the related mounting kit to review. If the site only needs a wireless transceiver, order the transceiver or enclosure assembly instead of this hardware-only accessory.
Compatible With
- SWRS485EXTENCL Select Wireless RS485 Mesh exterior enclosure installations
- Select Engineered Systems wireless RS485 mesh transceiver enclosure mounting on poles or posts
- SES CAT expansion projects using remote outdoor wireless RS485 nodes
- Gate, parking, access-control, and remote expansion locations where pole mounting is required
- Related to CATDR4 and CATRLY8 wireless expansion layouts when the enclosure is pole mounted
- Not a replacement for the SWRS485MESH transceiver or the SWRS485EXTENCL enclosure/transceiver assembly
Features & Specifications
| Manufacturer | Select Engineered Systems |
|---|
| Product Type | Pole-mount hardware kit |
|---|
| Part Number | SWRS485EXTPM |
|---|
| Application | Mounting hardware for Select Wireless RS485 Mesh exterior enclosure |
|---|
| Compatible Accessory | SWRS485EXTENCL |
|---|
| System Type | SES wireless RS485 mesh CAT expansion installations |
|---|
| Included Electronics | None - mounting hardware only |
|---|
| Notes | Confirm pole size, enclosure type, and mounting location before ordering |
|---|
Also Known As / Related Part Numbers
- SES-SWRS485EXTPM
- SWRS485EXTPM
- SES SWRS485EXTPM
- Select Wireless RS485 Enclosure Mounting Hardware
- RS485 Mesh Pole Mount Kit
- SWRS485EXTENCL pole mount hardware
- SWRS485MESH related system accessory
Technician Note
This is a mounting accessory, not an electronic communication module. If the installer needs the wireless node itself, review SWRS485MESH or SWRS485EXTENCL instead.
Important Ordering Warnings
- Do not upload this item as a complete wireless RS485 transceiver.
- Confirm the enclosure and pole-mount location before selling this as the correct hardware kit.
Before Ordering
- Confirm the customer already has or is ordering the SWRS485EXTENCL enclosure.
- Confirm the enclosure must be mounted to a pole or post.
- Check pole size, mounting location, weather exposure, and service clearance.
- Confirm all wireless transceiver nodes and expansion modules are ordered separately.
- Verify the installation layout with the access-control technician.
Professional Advisory
Pole-mounted low-voltage access-control equipment should be installed so the enclosure is secure, serviceable, weather protected, and not exposed to gate movement or vehicle impact.
Product Questions & Answers
Does SWRS485EXTPM include the transceiver?
No. It is mounting hardware for the exterior wireless RS485 enclosure, not the electronic transceiver.
What part does this mounting kit go with?
It is related to the SWRS485EXTENCL exterior enclosure version of the SES wireless RS485 mesh system.
Can this be used with CATDR4 or CATRLY8 directly?
It does not mount the CAT expansion module directly. It is for the wireless RS485 enclosure used in those expansion layouts.
Is this needed for every installation?
No. It is only needed when the exterior enclosure must be pole mounted.
Can it replace damaged enclosure hardware?
It may be used as related mounting hardware when the original installation uses the matching SES exterior enclosure and pole-mount setup.
