HySecurity MX3052-01, BRACKET, ARTIC.ARM, TO CHASSIS
This bracket is part of the mechanical support system for a HySecurity articulating arm assembly. Brackets in this area carry load, control pivot geometry, and help the arm move through the correct path. A bent, cracked, wallowed-out, or incorrectly installed bracket can cause uneven arm movement, binding, noise, fastener wear, or damage to adjacent pivot hardware.
The dash number on MX3052-01 is important. In HySecurity parts, dash versions can indicate a revision, variation, finish, orientation, or model-specific change. Since the uploaded product name identifies this as the articulating arm to chassis bracket, this page is written as the dash-version chassis bracket and keeps the related MX3052 reference in the related-number section without claiming universal interchange.
Compatible With
Compatibility should be verified by the HySecurity parts diagram, operator serial number, and the part number on the original component before ordering.
- Select HySecurity StrongArm / StrongArmCrash articulating arm assemblies where MX3052-01 is specified
- Chassis-side articulating arm bracket applications using the MX3052-01 dash version
- Supported SAM / anti-ram mechanical arm service where the parts diagram calls for MX3052-01
- Related to MX3052 but not assumed identical unless confirmed
- Not MX3053-01 left-hand pivot bracket
- Not MX3053-02 right-hand pivot bracket
Features and Specifications
| Manufacturer | HySecurity / Nice HySecurity |
|---|
| Product Type | Articulating arm to chassis bracket |
|---|
| Part Number | MX3052-01 |
|---|
| Application | Chassis-side articulating arm support, dash-version |
|---|
| Compatible Operator Type | Select HySecurity anti-ram / StrongArm articulating arm assemblies |
|---|
| Handing | Verify by diagram |
|---|
| Notes | Match dash number and bracket geometry before ordering |
|---|
Also Known As / Related Part Numbers
- MX3052-01
- MX 3052-01
- MX305201
- HYS-MX3052-01
- HySecurity bracket articulating arm to chassis
- MX3052-BRACKET-ARTICARM-TO-CHASSIS_p_11193.html">HySecurity MX3052 related bracket
- StrongArm articulating arm chassis bracket
- MX3052-BRACKET-ARTICARM-TO-CHASSIS_p_11193.html">Nice MX3052-BRACKET-ARTICARM-TO-CHASSIS_p_11193.html">HySecurity MX3052-01
Technician Note
Do not drop the dash number when ordering. If the parts diagram calls for MX3052-01, confirm whether MX3052 is an older, newer, or different bracket before substituting.
Before Ordering
- Confirm whether the diagram lists MX3052-01 or MX3052.
- Compare the original bracket geometry and hole spacing.
- Inspect all pivot and chassis mounting hardware.
- Check for impact damage to adjacent arm components.
- Secure the arm before removing bracket hardware.
Professional Advisory
Because this bracket is part of a structural arm assembly, replacement should be handled as a fitment-critical repair, not a cosmetic hardware swap.
Important Ordering Warnings
- Do not assume MX3052 and MX3052-01 are always interchangeable.
- Do not install if the bracket does not sit flat or align with the pivot hardware.
- Do not operate the barrier if the arm linkage binds after installation.
Product Questions and Answers
What is the difference between MX3052 and MX3052-01?
They are related articulating arm to chassis bracket references, but the dash number may indicate a specific version. Confirm interchange before substituting.
Is MX3052-01 a left-hand bracket?
The uploaded description identifies it as an arm-to-chassis bracket. Left-hand and right-hand pivot brackets are separate MX3053 references.
What causes this bracket to fail?
Impact, loose hardware, worn pivots, misalignment, corrosion, or repeated high-load operation can damage the bracket.
Should I replace both sides?
Replace only what the inspection and parts diagram require, but always inspect the full linkage for related damage.
Can this be welded or repaired?
For crash-rated equipment, structural bracket repair should not be improvised. Use the correct OEM part and service procedure.
