HySecurity MX3053-04, BRACKET, RH, ARTIC.ARM PIVOT,P
The HySecurity MX3053-04 is an OEM right-hand articulating arm pivot bracket used in select HySecurity barrier arm systems with articulated or folding arm assemblies. The bracket provides the fixed support point that allows the arm section to pivot correctly while maintaining proper geometry through the travel cycle.
A worn, bent, or misaligned pivot bracket can cause the barrier arm to bind, sag, track unevenly, or place extra stress on the arm hardware. MX3053-04 should be selected by the parts diagram and original bracket orientation. It is a handed component, so visual similarity to the left-hand bracket does not make it interchangeable.
Compatible With
- Select HySecurity StrongArmPark DC barrier gate operators using an articulating arm assembly.
- HySecurity articulating arm assemblies where the parts diagram calls for MX3053-04.
- Right-hand articulating arm pivot positions identified as BRACKET, RH, ARTIC.ARM PIVOT,P.
- Commonly associated with StrongArmPark DC arm service, articulating arm repairs, and traffic arm pivot hardware replacement.
- May be related to MX4010-series lighted articulating arm assemblies when the operator and arm generation match.
- Not a left-hand bracket; use MX3053-03 where the parts diagram calls for the LH P bracket.
Features and Specifications
| Manufacturer | HySecurity / Nice HySecurity |
|---|
| Part Number | MX3053-04 |
|---|
| Product Type | Right-hand articulating arm pivot bracket |
|---|
| Primary Application | Replacement right-hand pivot bracket for select HySecurity articulating arm assemblies |
|---|
| Compatible Operator Type | Barrier arm / StrongArmPark-style articulating arm applications |
|---|
| Handing / Size / Rating | Right hand, P version; match the original bracket and arm configuration. |
|---|
| Included Components | Bracket only unless hardware is shown or listed separately. |
|---|
| Notes | Do not substitute with the left-hand bracket or a non-P version without parts-diagram confirmation. |
|---|
Also Known As / Related Part Numbers
- MX3053-04
- MX305304
- MX3053 04
- Bracket, RH, Artic. Arm Pivot, P
- RH Articulating Arm Pivot Bracket P
- HySecurity right-hand articulating arm pivot bracket
- Related opposite-hand part: MX3053-03
- Related non-P references: MX3053-01 and MX3053-02, verify before substituting
Technician Note
Compare the old bracket to the replacement before tightening the arm hardware. Handed pivot brackets must align naturally with the arm path; forcing the arm into alignment can damage the pivot area or create travel problems.
Before Ordering
- Match part number MX3053-04 to the HySecurity parts diagram.
- Confirm right-hand pivot location and P-style bracket requirement.
- Inspect pivot pin, washers, and adjacent arm sections.
- Check the arm for impact damage or twisting before replacing only the bracket.
- Test arm travel and breakaway function after repair.
Professional Advisory
Installation and service on automated gate equipment should be performed by a qualified gate technician. Do not bypass safety devices, breakaway switches, monitored edges, or photo eyes to make a gate run.
Product Questions and Answers
What is HySecurity MX3053-04 used for?
HySecurity MX3053-04 is used as a right-hand articulating arm pivot bracket in replacement right-hand pivot bracket for select hysecurity articulating arm assemblies. It should be selected by the exact part number and the operator parts diagram.
Is MX3053-04 compatible with all HySecurity operators?
No. MX3053-04 should only be used with the HySecurity operator families and assemblies that list this part number or an approved related number in the parts diagram.
What should I check before ordering MX3053-04?
Check the original part number, operator model, serial number, production date when relevant, and the physical style of the old part. Also inspect nearby hardware or wiring that may have caused the failure.
Can I install MX3053-04 myself?
Mechanical parts should be installed only by someone familiar with automated gate equipment. Electrical parts and safety-related repairs should be handled by a qualified gate technician.
Are there related part numbers for MX3053-04?
Yes. See the Also Known As / Related Part Numbers section on this page. Related numbers may describe opposite-hand parts, newer or older harnesses, companion parts, or search variations and are not always direct replacements.
