Miller Edge PAH-093 Polyurethane Air Hose 3/32" ID - PAH-093 - 100ft
The Miller Edge PAH-093 polyurethane air hose is small 3/32 in. inside-diameter tubing used in select Air-Wave air-line applications. It is typically chosen where the original Miller Edge assembly used polyurethane lead tubing rather than silicone or gum rubber hose.
PAH-093 should be matched to the original tubing material and size. Using the wrong tubing can change the air response, create fitting leaks, or prevent the switch from adjusting correctly.
Compatible With
- Miller Edge Air-Wave configured sensing edges requiring 3/32 in. polyurethane tubing
- Miller Edge Air-Wave treadle applications that specify 3/32 in. ID polyurethane lead tubing
- AW10, AW12A, and AW14 Air-Wave switch applications when configured for 3/32 in. tubing
- Select ME190 Air-Wave treadle style applications using 3/32 in. polyurethane tubing
- Not a direct substitute for SAH-093 unless the original material can be changed and the fittings still match
- Not a substitute for RAH-375, RAH-500, RAH-750, HRH-375, or PS20K500 hose assemblies
Features & Specifications
| Manufacturer | Miller Edge |
|---|
| Product Type | Polyurethane air hose |
|---|
| Part Number | PAH-093 |
|---|
| Application | Small-diameter Air-Wave lead hose and treadle tubing |
|---|
| Material | Polyurethane |
|---|
| Size | 3/32 in. inside diameter |
|---|
| Length | 100 ft. |
|---|
| Compatible Switch Family | AW10, AW12A, and AW14 Air-Wave systems when configured for 3/32 in. tubing |
|---|
| Monitoring Type | Non-monitored system component |
|---|
| Notes | Match original tubing material, diameter, and fittings |
|---|
Also Known As / Related Part Numbers
- PAH-093
- PAH093
- PAH 093
- Miller Edge polyurethane air hose
- 3/32 in. polyurethane air hose
- Air-Wave treadle tubing
- ME190 Air-Wave tubing related component
Technician Note
Do not choose PAH-093 based only on the outside appearance of the tubing. Silicone, polyurethane, gum rubber, and hard rubber hose can be used in different parts of an air-edge system and may not seal the same way.
Before Ordering Checklist
- Confirm the original part number or hose material is PAH-093 polyurethane.
- Measure the inside diameter and confirm 3/32 in. tubing.
- Confirm the system is Air-Wave configured, not a larger PS20K500 pneumatic hose assembly.
- Check the tubing fittings and switch inlet before cutting replacement hose.
- Test the edge response and switch adjustment after replacement.
Professional Advisory
A non-responsive Air-Wave or pneumatic edge can create a serious entrapment hazard. If replacing tubing does not restore consistent operation, have the complete edge and control circuit inspected before returning the operator to service.
Product Questions & Answers
Q: What is PAH-093 used for?
A: PAH-093 is 3/32 in. polyurethane air hose used in select Miller Edge Air-Wave lead hose and treadle applications.
Q: Is PAH-093 the same as SAH-093?
A: No. PAH-093 is polyurethane tubing and SAH-093 is silicone tubing. Match the original material unless the system documentation allows a change.
Q: Can PAH-093 be used with AW10, AW12A, or AW14?
A: Yes, when the Air-Wave system is designed for 3/32 in. polyurethane tubing.
Q: Can PAH-093 replace RAH-500?
A: No. RAH-500 is 1/2 in. gum rubber hose used in larger air hose systems, while PAH-093 is 3/32 in. polyurethane tubing.
Q: Is PAH-093 a complete safety edge?
A: No. It is tubing only and must be used with the correct edge, switch, fittings, and operator safety circuit.
