AES AES-SEC-SD, AES Security Screwdriver (Both Parts)
The AES AES-SEC-SD is a security screwdriver for compatible AES Praetorian and Prime intercom service applications. It is used when an authorized installer, property manager, or service technician needs the correct tool to remove or install the matching AES security screws on supported AES intercom equipment.
Current supplier data identifies AES-SEC-SD as a tool / intercom accessory for AES Praetorian and Prime intercoms, with related series references including Cellcom Prime 7 and Praetorian Guard. The supplied product title also states "Both Parts," so the actual package contents should be confirmed if the repair requires a specific two-piece driver arrangement.
This is a service tool only. It does not include the intercom, callbox, security screws, lock key, keypad, monitor, PCB, power supply, router, antenna, mounting bracket, or replacement enclosure.
What This Tool Does
The AES-SEC-SD security screwdriver is used for authorized service access on compatible AES intercoms that use the matching security screw style. It helps technicians remove and reinstall the correct security screws without damaging the screw head, faceplate, housing, or service panel.
- Security screwdriver for compatible AES intercom service work
- Used with AES Praetorian and Prime intercoms according to current supplier data
- Related series references include Cellcom Prime 7 and Praetorian Guard
- Used for compatible AES security screw access
- Helpful for service, inspection, repair, and maintenance work
- Tool only; not a complete callbox or intercom part
- For authorized service personnel and legitimate equipment access only
Compatible With
The AES AES-SEC-SD is intended for compatible AES intercoms that use the matching security screw style. Current supplier data specifically references AES Praetorian and Prime intercoms, including Cellcom Prime 7 and Praetorian Guard series references.
- Select AES Praetorian intercom service applications
- Select AES Prime intercom service applications
- Compatible Cellcom Prime 7 service access applications where AES-SEC-SD is specified
- Compatible Praetorian Guard service access applications where AES-SEC-SD is specified
- AES intercom housings using the matching security screw style
Important Compatibility Warning
Do not order this screwdriver by appearance alone. Security screws can look similar but use different drive styles, sizes, and tool requirements. The AES-SEC-SD should be matched to the installed AES model and original security screw style before ordering.
- Confirm the exact part number is AES-SEC-SD.
- Confirm the installed AES unit uses the matching security screw style.
- Confirm the tool is needed for AES Praetorian, Prime, Cellcom Prime 7, Praetorian Guard, or another supported AES application.
- Confirm the supplied package includes the required parts if your repair depends on the "Both Parts" wording.
- Do not confuse this tool with a replacement screw set, lock key, prox credential, keypad, control board, or complete callbox.
- Do not force the tool into a screw head that does not match.
- Do not use this tool for unauthorized access to property equipment.
Similar AES Parts That Are Not Automatically Interchangeable
- AES AES-SEC-SD: Security screwdriver tool for compatible AES Praetorian and Prime intercom service access.
- AES IBK-KEY: Physical key set for compatible iB Range callboxes. This is not a security screwdriver.
- AES OPYN-SPARES-KIT: Spares kit for OPYN applications. It may include service hardware, but it is not the same as AES-SEC-SD unless specifically confirmed.
- AES OPYN-MULTI-SPARES-KIT: Spares kit for OPYN-MULTI applications. This is not automatically interchangeable with the AES-SEC-SD tool.
- AES security screws: Security screws are fasteners. AES-SEC-SD is the tool used to work with compatible screws.
- Generic security driver bits: Generic security bits may not match the AES screw style, size, depth, or service requirement.
Not Intended For
- Replacing a complete AES intercom or callbox
- Replacing security screws, lock cylinders, cabinet keys, hinges, faceplates, or housings
- Replacing a keypad, prox reader, control board, monitor, router, antenna, or power supply
- Electronic access control, prox access, keypad code access, or relay control
- Opening non-compatible equipment with a different security screw style
- Bypassing property access rules, tenant authorization, fire access, emergency access, or security procedures
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Part Number | AES-SEC-SD |
| Product Type | Security screwdriver / service tool |
| Product Category | Intercom accessory / tool |
| Compatible Series References | Cellcom Prime 7 and Praetorian Guard according to current supplier data |
| Typical Use | Authorized service access for compatible AES Praetorian and Prime intercoms |
| Package Note | Supplied title says "Both Parts"; verify exact included pieces before publishing package-specific details |
| Not Included | Intercom, callbox, screws, lock key, keypad, monitor, PCB, power supply, router, antenna, housing, and installation service |
Also Known As / Related Part Numbers
- AES AES-SEC-SD
- AES-SEC-SD
- AESSECSD
- AES Security Screwdriver
- AES Security Screwdriver Both Parts
- AES Praetorian Security Screwdriver
- AES Prime Security Screwdriver
- AES Cellcom Prime 7 Security Screwdriver
- AES Praetorian Guard Security Screwdriver
- AES Intercom Security Screwdriver
- AES Callbox Security Screwdriver
Related Parts and Service Checks
- AES security screws where the matching screws themselves need replacement
- AES IBK-KEY where a compatible iB Range callbox requires physical cabinet keys instead of a security screwdriver
- AES OPYN-SPARES-KIT where an OPYN installation requires its correct spare hardware kit
- AES OPYN-MULTI-SPARES-KIT where an OPYN-MULTI installation requires its correct spare hardware kit
- Compatible AES faceplate, shell, or housing service parts only when the installed unit documentation confirms the correct replacement
Technician Note
Use the correct security screwdriver before removing AES faceplate or housing screws. A mismatched tool can round out the screw head, damage the faceplate, scratch the finish, or make future service more difficult. If the screw is already stripped, corroded, or seized, stop before applying excessive force.
This tool should be kept with the service records or assigned to authorized personnel only. It is not an electronic access credential and should not be used to bypass property access procedures.
Before Ordering, Confirm
- Confirm the exact part number is AES-SEC-SD.
- Confirm the installed AES intercom uses the matching security screw style.
- Confirm the tool is needed for a compatible AES Praetorian, Prime, Cellcom Prime 7, or Praetorian Guard application.
- Confirm whether the job requires the complete "Both Parts" screwdriver package.
- Confirm this is not being ordered instead of security screws, cabinet keys, or a spare hardware kit.
- Confirm the screw heads are not stripped, seized, or damaged before beginning service.
- Use only for authorized service access.
Installation and Service Notes
- Use the correct tool size and style for the installed AES security screws.
- Apply firm, straight pressure to avoid cam-out or screw damage.
- Do not force the tool if it does not fully seat into the screw head.
- Support the faceplate or cover when removing the final screws.
- Keep removed screws organized so the correct fasteners go back into the correct locations.
- Inspect screws for wear, corrosion, or stripped heads before reinstalling.
- Reinstall security screws evenly and avoid overtightening into plastic, aluminum, or thin faceplate material.
- Follow property access procedures when opening an intercom or callbox housing.
Professional Advisory
The AES AES-SEC-SD security screwdriver should be used only by authorized personnel for legitimate service access to compatible AES intercoms and callboxes. Do not use this tool to bypass property security, tenant access rules, fire access equipment, emergency access procedures, gate operator safety systems, or site access policy. If the equipment is damaged, corroded, locked out, or does not match the tool, have the installation inspected by a qualified access control technician.
Product Questions & Answers
What is the AES AES-SEC-SD?
The AES AES-SEC-SD is a security screwdriver for compatible AES Praetorian and Prime intercom service applications.
What AES systems is this screwdriver used with?
Current supplier data references AES Praetorian and Prime intercoms, with related series references including Cellcom Prime 7 and Praetorian Guard.
Does this include both parts?
The supplied product title says "Both Parts." Verify the actual package contents before ordering if the job requires a specific two-piece screwdriver or bit arrangement.
Is this a complete callbox part?
No. AES-SEC-SD is a service tool only. It does not include the intercom, callbox, security screws, lock key, keypad, PCB, monitor, power supply, router, or antenna.
Can I use a generic security screwdriver instead?
A generic tool may not match the AES screw style or fit correctly. Using the wrong tool can strip the screw head or damage the intercom housing.
Is this the same as IBK-KEY?
No. IBK-KEY is a physical key set for compatible AES callbox housings. AES-SEC-SD is a security screwdriver for compatible security screws.
Will this fit every AES callbox?
No. This tool should be matched to the installed AES model and the security screw style. Do not assume it fits every AES product family.
What should be checked before ordering?
Check the AES model, screw style, service documentation, required package contents, and whether the tool is for authorized service access to compatible AES equipment.
