BEA 10LZRMICRORIGHT-T LZR-MICROSCAN T Right Replacement Sensor
The BEA 10LZRMICRORIGHT-T is a right-hand replacement sensor for the LZR-MICROSCAN T stand-alone door-mounted swing door safety system. In the field, this sensor is normally ordered when the right-side sensor has been physically damaged, has a cable or communication fault, has a cracked housing, or has failed diagnostics at the LZR-MICROSCAN hub. It is part of a laser Time-of-Flight safety system that monitors the door swing area instead of relying on older style infrared background detection. Correct fitment matters because the system uses handed sensors, a dedicated hub, specific harnessing, and setup parameters based on the door width and mounting height. This item should be used to restore an existing LZR-MICROSCAN T installation, not to build a complete system from scratch.
BEA’s LZR®-MICROSCAN T is a LASER-based sensor system designed for automatic swing doors.
Utilizing Time-of-Flight technology, the LZR®-MICROSCAN T eliminates the limitations of infrared-based devices. Its background independence eliminates nuisance detections caused by changing weather and floor conditions, while gyroscopes sense the movement of the door for accurate positioning.
The LZR®-MICROSCAN T provides adjustable pattern depths that exceed the ANSI 156.10 8.2.2.3 standard and offer 100 percent coverage in all door states (fully open, fully closed, opening and closing).
Easy To Install
Plug & play technology utilizing a centralized hub and intuitive LCD interface greatly reduces installation and setup time
Highly Accurate Detection
High resolution, self-adapting detection zones, coupled with reduced uncovered zones create the most accurate and reliable safety sensor
Built-In Troubleshooting
On-board error log ensures easy technical support
Standards Compliant
Fully monitored internally, capable of external monitoring
UL 10B/C Listed
Fire rated for up to three hours
Technical Specifications
| Specification | Manufacturer Technical Data |
|---|
| Technology | LASER scanner, Time-of-Flight measurement |
| Detection Mode | Presence |
| Min. / Max. Door Width | 20 – 48" (measured from leading edge to sensor LED) |
| Mounting Height | 75 – 98" (measured from finished floor to sensor LED) |
| Remission Factor | > 2% |
| Angular Resolution | 2.56° |
| Testbody | 28" (H) × 12" (W) × 8" (D) |
| Emission Characteristics | IR LASER; wavelength 905 nm; maximum output pulse power 35 W (Class I) |
| Supply Voltage | 12 – 30 VDC (15 W Class II) |
| Power Consumption | < 15 W |
| Response Time | Typ. 40 ms; Max. 80 ms |
| Output Rating | 4 electro-mechanic relays (galvanic isolated - polarity free)
All outputs Class 2 supply, 12 – 24 VAC, 12 – 30 VDC, Max. 15 W |
| Input Rating | 2 optocouplers (galvanic isolated - polarity free)
12 – 24 VAC, 50 / 60 Hz, 12 – 30 VDC, Max. 15 W |
| Test Input* | 8 – 15 VDC |
| Temperature Range | -13 – 121°F (-25 – 55°C) |
| Degree of Protection | Hub: IP20 / NEMA 1
Sensor: IP53 / NEMA 3 |
| Humidity | 0 – 95% Non-condensing |
| Vibrations | < 2 G |
| Material | PC / ASA |
| Norm Conformity | EN 60825-1-Eye-safety class 1 IR LASER (905 nm), UL 10B/C Fire Rated 3 hrs (file #R39071) |
| Mounting Angle (Rotational) | 35° fixed |
| Tilt Angle | 0 – 5° (for angles less than 5° contact Technical Support) |
| Pollution on Front Screens | Maximum 30%; Homogenous |
Compatible With
- BEA LZR-MICROSCAN T automatic swing door systems
- Right-side sensor replacement position only
- Single swing door kits using right and left LZR-MICROSCAN T sensors
- Sim pair / dual egress LZR-MICROSCAN T kits when the failed part is the right sensor
- Systems using BEA LZR-MICROSCAN hub and compatible harnessing
- Commercial pedestrian swing doors within supported LZR-MICROSCAN T mounting and width limits
- Verify by original sensor label, handing, hub generation, and wiring before ordering
Features and Specifications
| Manufacturer | BEA Sensors |
|---|
| Product Family | LZR-MICROSCAN T |
|---|
| Technology | LASER scanner, Time-of-Flight measurement |
|---|
| Detection Mode | Presence |
|---|
| Part Number | 10LZRMICRORIGHT-T |
|---|
| Product Type | Right-side replacement sensor |
|---|
| Included Components | Right replacement sensor only |
|---|
| Compatible Operator Type | Automatic pedestrian swing door system |
|---|
| Handing | Right side only |
|---|
| Typical Door Width Range | 20 in to 48 in measured from leading edge to sensor LED |
|---|
| Mounting Height | 75 in to 98 in measured from finished floor to sensor LED |
|---|
| Supply Voltage | 12-30 VDC Class II, system dependent |
|---|
| Power Consumption | Less than 15 W |
|---|
| Important Note | Match left/right sensors, hub, harnesses, power supply, and door configuration before ordering |
|---|
Also Known As / Related Part Numbers
Technician Note
Replace the sensor only after confirming the fault follows the right-side sensor and not the hub, cable, power supply, or door-control monitoring input. Handing is important on this system.
Before Ordering Checklist
- Confirm the original sensor label reads 10LZRMICRORIGHT-T or an accepted right-sensor equivalent
- Confirm the failed part is the right sensor, not the left sensor or hub
- Check the hub and cable for visible damage or corrosion
- Verify the door is an automatic pedestrian swing door using LZR-MICROSCAN T
- Confirm mounting height and door width remain within the supported range
Important Ordering Warnings
- Not a complete kit
- Not a left-side sensor
- Not for sliding doors, industrial overhead doors, or gate operators
- Do not disassemble or attempt internal repair of the sensor
Professional Advisory
Automatic pedestrian door safety devices should be installed and tested by a qualified automatic-door technician. Do not bypass presence detection or door-control monitoring to keep a door operating.
Product Questions and Answers
Is 10LZRMICRORIGHT-T a complete LZR-MICROSCAN kit?
No. This is the right-side replacement sensor only. A complete working LZR-MICROSCAN T system also uses the matching left sensor, hub, wiring harnesses, and the correct power and door-control connections.
Can this replace the left Microscan sensor?
No. The right and left sensors are handed parts and should not be swapped. Match the failed sensor location and the part number printed on the original sensor before ordering.
What type of door is this sensor used on?
It is used on BEA LZR-MICROSCAN T automatic pedestrian swing door safety systems, commonly found on commercial entry doors where door-mounted presence detection is required.
Will this work on a sliding door or industrial overhead door?
No. This part belongs to the LZR-MICROSCAN T swing-door system. Sliding door, industrial door, gate, and overhead door applications use different BEA sensor families.
What should be checked if the system still faults after replacing the sensor?
Check the hub, harness, sensor handing, mounting height, door width, alignment, and door-control monitoring circuit. Internal sensor repair should be handled by the manufacturer or a qualified automatic-door technician.
