BEA 10REMOTE, Universal I.R. Remote Control
The BEA 10REMOTE is a universal infrared programming remote used by automatic door technicians to adjust compatible BEA sensors. Many BEA microwave, infrared, laser, and presence sensors are mounted above doors or on door leaves where direct access to controls can be inconvenient. The 10REMOTE allows the technician to unlock supported sensors, select parameters, change values, and relock the sensor after setup. It is especially useful during commissioning, service calls, sensitivity adjustments, detection-zone changes, and output configuration. This remote should be treated as a programming tool, not as a customer activation transmitter. A single 10REMOTE may be used across many supported BEA sensor families, but the exact adjustment options depend on the sensor model and firmware.
Compatible With
- Compatible BEA sensor families that support infrared remote adjustment
- BEA Eagle and Eagle Artek microwave motion sensors
- BEA Falcon, Falcon EX, and Phoenix EX industrial sensor families
- BEA IS40, IS40XL, IS40P, IXIO, Ultimo, Sparrow, and Bodyguard-T references when supported
- BEA LZR-I30, LZR-S600, LZR-H100, and select LZR-FLATSCAN sensor families when supported by the model
- Technician setup and service work for automatic pedestrian doors and industrial door sensors
Features & Specifications
| Manufacturer | BEA |
|---|
| Product Type | Universal infrared programming remote |
|---|
| Part Number | 10REMOTE |
|---|
| Application | BEA sensor adjustment and programming |
|---|
| Signal Type | Infrared remote control |
|---|
| Used For | Setup, parameter adjustment, and service |
|---|
| Not Used For | Door activation transmitter or access credential |
|---|
| Notes | Compatibility depends on sensor model and generation |
|---|
Also Known As / Related Part Numbers
- 10REMOTE
- BEA Universal Remote Control
- BEA universal I.R. remote
- BEA sensor programming remote
- 10REMOTE universal remote
- BEA remote control for sensor adjustment
Technician Note
This remote is useful only when the installed BEA sensor supports remote programming. Always lock the sensor settings after adjustment and document the final settings for future service.
Before Ordering
- Confirm the BEA sensor family supports 10REMOTE adjustment.
- Check whether the sensor requires an access code or unlock sequence.
- Do not order this as a push plate transmitter or door remote.
- Have the sensor manual available before changing parameters.
- Test the door operation and safety zones after any sensor adjustment.
- Keep the remote available for future service calls.
Professional Advisory
Automatic pedestrian door sensors and wireless controls should be installed, adjusted, and tested by a qualified automatic door technician. Do not use an activation sensor as a substitute for required presence, safety, or monitored protection devices.
Product Questions & Answers
What is the BEA 10REMOTE used for?
The 10REMOTE is used by technicians to adjust compatible BEA sensors, including many microwave, infrared, laser, and presence sensor families.
Is the 10REMOTE a door activation transmitter?
No. It is a sensor programming and adjustment remote, not a push plate transmitter or access-control remote.
Which BEA sensors commonly use this remote?
Common references include BEA Eagle, Falcon, Phoenix, IS40, IXIO, Bodyguard-T, Ultimo, Sparrow, LZR-I30, LZR-S600, and LZR-FLATSCAN families when supported by the sensor model.
Will this remote work on every BEA product ever made?
No. It should be matched to the sensor family and generation. Some older or specialty products may use different adjustment methods.
Why would a technician need this remote?
It allows setup of sensor parameters such as sensitivity, detection pattern, output behavior, hold time, and other supported settings without opening or reaching the sensor housing.
