Liftmaster K75-19095 Drive Wheel Replacement Kit, 2HP HS670 Gate Openers
The LiftMaster K75-19095 drive wheel kit is a replacement wheel set for 2 HP HS670 slide gate operator applications. On this style of operator, the drive wheels are a wear item that directly affects how well the operator transfers power to the gate. When the wheels become glazed, worn, cracked, contaminated, or uneven, the motor may run but the gate may slip, hesitate, or fail to travel smoothly.
This kit is commonly described as a pair of drive wheels for the 2 HP HS670 setup. It should be matched carefully because the 1 HP and 2 HP HS670 drive wheel kits are not the same listing. Correct horsepower, operator generation, shaft fit, and parts diagram confirmation matter. Replacing worn wheels without correcting a dragging gate, poor guide alignment, or track obstruction can lead to repeat failures.
Compatible With
- LiftMaster HS670 2 HP slide gate operator applications
- LiftMaster HS670 commercial and residential slide gate operators when the parts diagram calls for K75-19095
- Select HS670GL / HS670 series drive wheel assemblies where the 2 HP wheel kit is specified
- Slide gate installations using the matching 2 HP LiftMaster drive wheel configuration
Features & Specifications
| Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | Drive wheel replacement kit |
| Part Number | K75-19095 |
| Application | Replacement drive wheels for HS670 slide gate operator |
| Compatible Operator Type | Slide gate operator |
| Compatible Model Family | HS670 2 HP applications |
| Horsepower | 2 HP applications |
| Included Components | Commonly listed as quantity 2 drive wheels |
| Notes | Do not confuse with K75-19096 for 1 HP applications |
Also Known As / Related Part Numbers
- K75-19095
- LM-K75-19095
- LiftMaster K75-19095
- LIF-K75-19095
- K75 19095
- 75-19095
- Drive Wheels, 2HP, Qty 2
- HS670 2HP drive wheel kit
- Related but not interchangeable without verification: K75-19096 1HP drive wheel kit
Technician Note
Inspect the gate track, rollers, guide assembly, and operator mounting before installing new drive wheels. Wheel wear is often a symptom of a gate that is dragging, misaligned, or carrying load unevenly.
Before Ordering Checklist
- Confirm HS670 operator model.
- Confirm the operator is the 2 HP version.
- Compare the existing wheel size and hub style.
- Check the replacement parts diagram for K75-19095.
- Inspect the gate for slipping causes before replacing only the wheels.
Professional Advisory
Disconnect power and secure the gate before service. Heavy slide gates can move unexpectedly and create crush hazards. Use a qualified gate technician for mechanical service on large commercial gate systems.
Product Questions and Answers
Which HS670 version uses K75-19095?
K75-19095 is commonly listed as the drive wheel kit for 2 HP HS670 slide gate operator applications. Verify the horsepower and parts diagram before ordering.
How many wheels are included?
This kit is commonly described as a pair or quantity of two drive wheels for the 2 HP HS670 setup.
Can I use K75-19095 on a 1 HP HS670?
Do not substitute it for the 1 HP version. The K75-19096 kit is commonly associated with 1 HP HS670 drive wheel applications.
What symptoms point to worn drive wheels?
Common signs include slipping, poor traction, noisy travel, inconsistent movement, visible wheel wear, or the operator running while the gate does not move correctly.
Should both drive wheels be replaced together?
For best traction and even wear, drive wheels are commonly replaced as a matched pair when the kit includes two wheels.
