NICE / APOLLO PD0942A3000, Upper cover for TITAN 12L/12L1, aluminum
The NICE Apollo PD0942A3000 is the upper aluminum cover used on TITAN 12L and TITAN 12L1 swing gate operator applications. Its job is to protect the upper section of the actuator housing and help keep weather, dust, insects, and physical debris away from sensitive operator components. A damaged or missing cover can shorten the life of the actuator by allowing moisture and contamination into areas that should remain protected.
This is a housing cover, not a working electrical or drive component. When ordering, confirm that the needed part is the upper cover and not the lower motor cover, a limit switch, lock cylinder kit, actuator arm, or internal drive part. Similar Apollo and Titan parts can look related in diagrams, but the operator model and cover position matter.
Compatible With
- NICE Apollo TITAN 12L swing gate operator applications
- NICE Apollo TITAN 12L1 swing gate operator applications
- Select Titan 12 actuator service and refurbishment applications where the parts diagram calls for PD0942A3000
- Related Titan 912L / 912L1 operator families only when the parts diagram specifically identifies this upper cover
- Not a universal Apollo 816, 416, 1500, 3500, or 3501 cover
Features and Specifications
| Manufacturer | NICE Apollo |
|---|
| Product Type | Upper operator cover |
|---|
| Part Number | PD0942A3000 |
|---|
| Material / Finish | Aluminum |
|---|
| Application | Protective upper cover for TITAN 12L / 12L1 operator housing |
|---|
| Compatible Operator Type | Select linear actuator swing gate operators |
|---|
| Related Components | Bottom cover, limit switch, lock cylinder kit, and actuator parts sold separately |
|---|
| Notes | Confirm upper cover position before ordering |
|---|
Also Known As / Related Part Numbers
- PD0942A3000
- Nice Apollo Upper Cover
- Titan 12L Upper Cover
- Titan 12L1 Upper Cover
- Apollo Cover Motor Upper
- TITAN12L Cover
- TITAN12L1 Cover
- Related lower cover reference PD0929A3000
Technician Note
If the original cover was damaged by gate impact or actuator movement, inspect the brackets, pivot points, and actuator alignment before installing the new cover.
Before Ordering Checklist
- Confirm the operator is TITAN 12L or TITAN 12L1
- Confirm the needed part is the upper cover, not the lower cover
- Check for missing screws, latch, or related hardware needed for installation
- Inspect the actuator housing for cracks or water intrusion before replacing the cover
- Do not force a cover onto a different Apollo actuator model
Professional Advisory
This is a mechanical cover replacement. If the actuator shows water damage, exposed wiring, or unsafe gate movement, have a qualified technician inspect the operator before returning it to service.
Product Questions and Answers
What operator does PD0942A3000 fit?
PD0942A3000 is an upper aluminum cover for NICE Apollo TITAN 12L and TITAN 12L1 operator applications.
Is this a motor or gearbox part?
No. It is a protective upper cover for the operator housing area, not a motor, gearbox, limit switch, or control board.
Does it include the bottom cover?
No. The bottom motor cover is a separate related part and should be ordered separately if needed.
Can it be used on an Apollo 816 arm?
Do not assume fitment by brand alone. This cover is for TITAN 12L/12L1 applications, not a universal Apollo actuator cover.
Why replace the upper cover?
Replacement is common when the cover is cracked, missing, corroded, dented, or no longer protecting the upper motor/operator components from weather and debris.
