SES PST242DS, SPECIAL DUAL POST 42"/72"
The SES PST242DS is the dual-height pedestal option in the Select Engineered Systems pedestal family. It is used where a single entry lane must serve passenger vehicles as well as taller trucks, vans, delivery vehicles, or service vehicles. Instead of relying on one access-control device height for every driver, the dual-post layout allows equipment to be placed at two different reach points.
This pedestal style is commonly used with telephone entry, card access, keypad, visitor entry, intercom, and related access-control equipment when the site layout calls for a high/low arrangement. It is especially useful on commercial gates, gated residential entrances with frequent service vehicles, truck lanes, and mixed-traffic parking entries.
Fitment is not determined by the pedestal alone. SES pedestal documentation separates the post from the adapter plates used for TEC, CAT, weather hoods, and other entry housings. Before replacing or installing a PST242DS, confirm the device being mounted, the adapter plate, the faceplate dimensions, and the conduit path through the post.
Compatible With
- Select Engineered Systems PST242DS special dual-post applications
- Mixed-vehicle gate entry lanes needing lower and higher access points
- SES TEC1 with correct TEC1 adapter where the device is mounted to the pedestal
- SES TEC2, TEC4, CAT2, and CAT4 with PSTATAC or the correct adapter where applicable
- SES weather hood installations when the proper hood adapter is used
- Card reader, keypad, intercom, camera, or telephone entry mounting where the mounting pattern is confirmed
- Not a universal replacement for a single PST242 or PST248 where the pad, conduit, or device spacing is different
Features and Specifications
| Manufacturer | Select Engineered Systems |
|---|
| Product Type | Dual-height access-control pedestal |
|---|
| Part Number | PST242DS / SES-PST242DS |
|---|
| Application | Two-height vehicle access-control mounting |
|---|
| Height Reference | Uploaded product name references 42 inch / 72 inch |
|---|
| Common Use | Gate entry, truck lane, mixed vehicle access, visitor entry |
|---|
| Approximate Shipping Weight | SES pedestal sheet commonly lists PST242DS around 20 lb |
|---|
| Notes | Adapter plate and equipment layout must be confirmed |
|---|
Also Known As / Related Part Numbers
- PST242DS
- SES-PST242DS
- SelectSES PST242DS
- special dual post pedestal
- 42 inch / 72 inch dual post
- dual-height gooseneck pedestal
- PST242 related 42 inch pedestal
- PST248 related 48 inch pedestal
- PSTATAC related adapter
- PSTAT101 related adapter
Technician Note
Use this pedestal only after confirming the lane layout. Dual-height posts can solve reach issues, but the high and low devices must be positioned so vehicles do not strike the post or gate equipment.
Before Ordering
- Confirm whether one or two access devices will be mounted.
- Confirm each device mounting pattern and adapter requirement.
- Check lane width, curb height, vehicle approach angle, and gate clearance.
- Verify conduit routing for both high and low devices.
- Do not substitute this for a single post without checking pad and anchor requirements.
Professional Advisory
Pedestal and access-control wiring should be installed so the post is stable, sealed from water intrusion, and clear of moving gate travel. For high/low truck-lane layouts, a professional site layout review is strongly recommended.
Product Questions
What is the PST242DS used for?
It is used for dual-height access-control mounting where both standard passenger vehicles and taller vehicles need to reach a keypad, card reader, intercom, or telephone entry unit.
Is the PST242DS the same as the PST242?
No. PST242 is a single 42 inch pedestal. PST242DS is a special dual-post pedestal reference, commonly associated with two mounting heights.
Can I mount a TEC or CAT unit directly to it?
Usually an adapter is still required. SES pedestal documentation separates the pedestal from adapter plates such as PSTATAC and PSTAT101.
Does this include access-control electronics?
No. This is the pedestal hardware only. Telephone entry units, readers, keypads, cameras, wiring, adapters, and mounting anchors are separate unless included elsewhere.
What is the main fitment risk?
The main risk is assuming the pedestal height is the only requirement. The device faceplate pattern, adapter, conduit path, and lane layout must also match.
