AES OPYN-PRO-UPGRADE-KIT, Control PCB w/ Camera PCB & Ribbon Cable
The AES OPYN-PRO-UPGRADE-KIT is a control PCB with camera PCB and ribbon cable for compatible AES OPYN Pro systems. It is used for supported OPYN Pro service, upgrade, or replacement work where the main control electronics and camera board connection need to be addressed together.
This is an electronics kit, not a complete intercom station. It should not be confused with an OPYN Pro shell assembly, keypad, proximity reader, camera faceplate, touchscreen, power supply, PoE injector, 4G router, SIM card, antenna, mounting pedestal, or finished access control system. The existing enclosure, keypad, reader, wiring, mounting hardware, and related components must be reused or ordered separately where required.
What This Upgrade Kit Includes
- Control PCB for compatible OPYN Pro applications
- Camera PCB for compatible OPYN Pro applications
- Ribbon cable for the supported board connection
What This Kit Does
The OPYN-PRO-UPGRADE-KIT provides replacement or upgrade electronics for compatible OPYN Pro systems where the service requirement calls for the combined control PCB, camera PCB, and ribbon cable kit. It is commonly considered when the repair involves the control board and camera board connection together rather than only one separate board.
- Replacement / upgrade electronics kit for compatible OPYN Pro systems
- Includes control PCB, camera PCB, and ribbon cable
- Supports technician-level OPYN Pro service work
- Useful when both control board and camera board components are required
- Helps avoid ordering the main PCB and camera PCB separately where the upgrade kit is specified
- Electronics kit only; shell, keypad, reader, power, router, SIM, and antenna parts are not included
Compatible With
The AES OPYN-PRO-UPGRADE-KIT may be used with select AES OPYN Pro systems where the current AES parts listing, service documentation, or technician diagnosis calls for this upgrade kit. Always confirm the exact OPYN Pro model, system generation, board version, camera board requirement, and ribbon cable connection before ordering.
- Select AES OPYN Pro video intercom and access control systems
- Select OPYN-PRO-IP applications where this upgrade kit is confirmed by parts documentation
- Select OPYN-PRO-4G applications where this upgrade kit is confirmed by parts documentation
- Service applications requiring a control PCB, camera PCB, and ribbon cable together
- Replacement applications where the required part number is OPYN-PRO-UPGRADE-KIT
- Technician repairs where the existing board set has been confirmed as failed or outdated
Important Compatibility Warning
Do not order this kit by appearance alone. AES OPYN Pro systems may vary by IP or 4G configuration, hardware generation, mounting style, firmware/app setup, shell assembly, board layout, and internal cable connections. A similar-looking board or ribbon cable may not be interchangeable.
- Confirm the required part number is OPYN-PRO-UPGRADE-KIT.
- Confirm the installed system is an AES OPYN Pro system.
- Confirm whether the installed unit is OPYN-PRO-IP, OPYN-PRO-4G, or another OPYN Pro configuration.
- Confirm the kit is needed instead of only OPYN-PRO-MAIN-PCB or only OPYN-PRO-CAM-KIT.
- Confirm the camera PCB and ribbon cable connection match the installed unit.
- Confirm whether firmware, app setup, network setup, or reconfiguration may be required after replacement.
- Do not order this kit expecting a shell assembly, complete intercom, keypad, reader, power supply, router, SIM card, or antenna.
OPYN-PRO-UPGRADE-KIT Compared With Similar AES Parts
| AES Part | General Use | Important Difference |
| OPYN-PRO-UPGRADE-KIT | Control PCB with camera PCB and ribbon cable for OPYN Pro | This page item; combined electronics kit for supported OPYN Pro service work |
| OPYN-PRO-MAIN-PCB | IP control board for OPYN Pro | Main PCB only; does not include the camera PCB and ribbon cable kit unless stated separately |
| OPYN-PRO-CAM-KIT | Camera PCB with ribbon cable for OPYN Pro | Camera board kit only; does not replace the full control PCB upgrade kit |
| OPYN-PRO shell assemblies | Replacement housing / shell parts | Physical housing only; does not include control electronics |
| Complete OPYN Pro callbox | Complete video intercom / access control station | Complete unit includes many additional components; not the same as this electronics kit |
Similar Parts That Are Not Automatically Interchangeable
- AES OPYN-PRO-MAIN-PCB: Related OPYN Pro main control board. It should not be treated as the same as the upgrade kit because the upgrade kit includes the control PCB, camera PCB, and ribbon cable.
- AES OPYN-PRO-CAM-KIT: Related camera PCB with ribbon cable. It may be correct when only the camera board assembly is needed, but it is not the same as the full upgrade kit.
- AES OPYN-PRO-IP shell assemblies: OPYN-PRO-IP-PSK-SH and OPYN-PRO-IP-PBK-SH are shell / housing parts and do not replace the control PCB kit.
- AES OPYN-PRO-4G shell assemblies: OPYN-PRO-4G-PSK-SH, OPYN-PRO-4G-PBK-SH, and OPYN-PRO-ABK-SH are shell / housing parts and do not replace the electronics kit.
- AES OPYN and OPYN-MULTI parts: Standard OPYN and OPYN-MULTI boards, spares kits, shells, and wiring parts should not be assumed to fit OPYN Pro systems.
- Power supplies, PoE injectors, routers, and SIM accessories: These support the system but do not replace the control PCB, camera PCB, or ribbon cable.
Not Intended For
- Replacing the complete OPYN Pro intercom
- Replacing only the shell, housing, pedestal, or architectural mount
- Replacing a keypad, proximity reader, speaker, microphone, monitor, or access credential
- Replacing a power supply, PoE injector, 4G router, SIM card, data plan, antenna, or Wi-Fi antenna
- Repairing a poor cellular signal, weak Wi-Fi signal, inactive SIM, wrong APN, or network configuration issue by itself
- Repairing gate operator, electric lock, or relay wiring problems by itself
- Use in standard OPYN, OPYN-MULTI, Prime, CellCOM, or non-OPYN Pro systems unless AES documentation confirms compatibility
- Bypassing access control wiring, gate safety devices, emergency access, fire access, or operator safety circuits
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Part Number | OPYN-PRO-UPGRADE-KIT |
| Product Type | Control board / electronics upgrade kit |
| Product Family | OPYN Pro / Opyn series |
| Included Control PCB | Included according to current product listing |
| Included Camera PCB | Included according to current product listing |
| Included Ribbon Cable | Included according to current product listing |
| Primary Use | Supported OPYN Pro service, upgrade, or replacement work requiring the board kit |
| Shell / Housing Included | No shell or housing included unless your actual package specifically states otherwise |
| Power Accessories Included | No power supply, PoE injector, router, SIM card, antenna, or data plan included unless your actual package specifically states otherwise |
| Typical Users | Gate access technicians, low-voltage installers, OPYN Pro service departments, and access control repair technicians |
Also Known As / Related Part Numbers
- AES OPYN-PRO-UPGRADE-KIT
- OPYN-PRO-UPGRADE-KIT
- OPYNPROUPGRADEKIT
- AES OPYN Pro Upgrade Kit
- AES Control PCB with Camera PCB and Ribbon Cable
- AES OPYN Pro Control PCB with Camera PCB
- AES OPYN Pro Control Board Upgrade Kit
- AES OPYN Pro Camera PCB and Control PCB Kit
- AES OPYN Pro Electronics Upgrade Kit
- OPYN-PRO-MAIN-PCB - related OPYN Pro main PCB, not the same combined upgrade kit
- OPYN-PRO-CAM-KIT - related camera PCB with ribbon cable, not the same combined upgrade kit
- OPYN-PRO-IP-PSK-SH - related OPYN Pro IP stainless pedestal shell, not an electronics kit
- OPYN-PRO-IP-PBK-SH - related OPYN Pro IP powder-coated pedestal shell, not an electronics kit
- OPYN-PRO-4G-PSK-SH - related OPYN Pro 4G stainless pedestal shell, not an electronics kit
- OPYN-PRO-4G-PBK-SH - related OPYN Pro 4G powder-coated pedestal shell, not an electronics kit
- OPYN-PRO-ABK-SH - related OPYN Pro architectural shell, not an electronics kit
Related Parts and Accessories
- AES OPYN-PRO-MAIN-PCB where only the compatible main control board is required
- AES OPYN-PRO-CAM-KIT where only the camera PCB with ribbon cable is required
- AES OPYN Pro shell assemblies where the housing is damaged but electronics are reusable
- AES OPYN Pro power supplies and PoE accessories where confirmed by AES documentation
- AES router, SIM, antenna, and network accessories where the installed OPYN Pro configuration requires them
- Mounting screws, seals, gaskets, service hardware, and wiring harnesses only where specifically listed for the installed OPYN Pro model
Technician Note
This kit should be ordered only after the OPYN Pro system has been diagnosed far enough to confirm that the control PCB, camera PCB, and ribbon cable kit is the correct repair path. Video, calling, app, relay, credential, cellular, Wi-Fi, or network issues can also be caused by power problems, wiring, router settings, SIM service, antenna placement, firmware, configuration, or a failed accessory.
Ribbon cable handling matters. Ribbon cables and camera board connectors can be damaged by pulling at an angle, forcing the connector, reversing orientation, pinching the cable during reassembly, or powering the unit while boards are being handled. If the installer is not familiar with board-level OPYN Pro service, the repair should be handled by a qualified access control technician.
Before Ordering, Confirm
- Confirm the exact part number is OPYN-PRO-UPGRADE-KIT.
- Confirm the installed unit is an AES OPYN Pro system.
- Confirm whether the installed system is OPYN-PRO-IP, OPYN-PRO-4G, or another OPYN Pro version.
- Confirm this kit is required instead of only OPYN-PRO-MAIN-PCB.
- Confirm this kit is required instead of only OPYN-PRO-CAM-KIT.
- Confirm the existing camera PCB, control PCB, ribbon cable, and connectors have been inspected.
- Confirm power supply, PoE, router, SIM, antenna, Ethernet, Wi-Fi, and system settings have been checked where relevant.
- Confirm whether firmware, app pairing, network setup, relay setup, or credential programming may need to be restored after board replacement.
- Confirm this is not being ordered to replace a shell assembly, keypad, reader, power accessory, router, SIM card, or complete intercom.
Installation and Service Notes
- Power down the OPYN Pro system before removing boards, camera PCB, or ribbon cable connections.
- Label wiring and take reference photos before disconnecting boards, harnesses, camera wiring, reader wiring, keypad wiring, or relay wiring.
- Handle the PCB and camera board using proper static-control practices.
- Do not bend, crease, pinch, or sharply fold the ribbon cable.
- Confirm ribbon cable orientation and seating before applying power.
- Do not force connectors, board screws, spacers, or brackets if alignment does not match.
- Inspect seals, gaskets, cable entries, and shell alignment during reassembly.
- After installation, test power, video, audio, camera image, keypad operation, proximity reader operation, relay output, app/cloud connection, and gate or door release.
- Confirm required gate safety devices, emergency access, fire access, and operator safety circuits still work after service.
Professional Advisory
OPYN Pro board replacement, camera PCB service, ribbon cable handling, access control wiring, relay wiring, network setup, and cellular/IP troubleshooting should be handled by a qualified gate access or low-voltage technician when the system controls an automated gate or managed entry point. Do not use board replacement, relay wiring, software setup, or accessory wiring to bypass monitored photo eyes, safety edges, emergency access equipment, fire access equipment, access control authorization, or operator safety circuits.
Product Questions & Answers
What is included with the AES OPYN-PRO-UPGRADE-KIT?
The AES OPYN-PRO-UPGRADE-KIT includes a control PCB, camera PCB, and ribbon cable for compatible OPYN Pro service or upgrade applications.
Is this kit for OPYN Pro systems?
Yes. Current listings identify OPYN-PRO-UPGRADE-KIT as a control PCB with camera PCB and ribbon cable for OPYN Pro. Confirm the exact installed OPYN Pro model and hardware version before ordering.
No. OPYN-PRO-MAIN-PCB is a related main control board listing. OPYN-PRO-UPGRADE-KIT is the combined kit that includes the control PCB, camera PCB, and ribbon cable.
No. OPYN-PRO-CAM-KIT is the related camera PCB with ribbon cable. OPYN-PRO-UPGRADE-KIT includes the control PCB along with the camera PCB and ribbon cable.
Does this kit include the OPYN Pro shell?
No. This kit does not include the OPYN Pro shell, pedestal housing, architectural housing, faceplate, keypad, reader, power supply, router, SIM card, antenna, or complete intercom assembly.
Can this kit fix an OPYN Pro camera or video issue?
It may be used when the confirmed repair requires the control PCB, camera PCB, and ribbon cable. Before replacing the kit, check power, ribbon cable seating, camera board connection, network setup, firmware, app settings, and the display or video path where applicable.
What should be checked before replacing this kit?
Before replacing the kit, check power input, PoE or low-voltage supply, Ethernet or cellular connection, camera PCB, ribbon cable seating, control board condition, relay wiring, reader wiring, app configuration, and whether the installed system actually calls for OPYN-PRO-UPGRADE-KIT.
