AES OPYN-PRO-4G-PBK-SH, Shell Assembly, OPYN-PRO-4G, Powder Coat Pedestal
The AES OPYN-PRO-4G-PBK-SH is a powder-coated shell assembly for compatible OPYN-PRO-4G pedestal-mount units. It is used as a replacement housing when the original OPYN-PRO-4G pedestal shell has been damaged, weathered, dented, scratched, or worn from outdoor exposure and regular service use.
This is a shell assembly only. It should not be confused with a complete OPYN-PRO-4G callbox, keypad, proximity reader, camera assembly, touchscreen, PCB, power supply, PoE injector, built-in 4G router, SIM card, antenna, or finished access control system. The existing electronics and related components must be reused or ordered separately where required.
What This Shell Assembly Does
The OPYN-PRO-4G-PBK-SH provides the replacement powder-coated outer shell for a compatible pedestal-mounted OPYN-PRO-4G unit. It helps restore the physical housing and appearance of the access control station when the existing shell is no longer suitable for service.
- Replacement shell assembly for compatible OPYN-PRO-4G pedestal units
- Powder-coated black finish
- Designed for pedestal-mount OPYN-PRO-4G applications
- Used when the original housing is damaged, weathered, dented, or worn
- Helps restore the appearance and physical housing of the OPYN-PRO-4G station
- Housing / shell only; electronics are not included
- Useful for service repairs, refurbishment, and field replacement work
Compatible With
The AES OPYN-PRO-4G-PBK-SH is intended for compatible AES OPYN-PRO-4G pedestal-mounted systems where the current parts listing or service requirement calls for the powder-coated pedestal shell assembly. Always confirm the exact OPYN Pro model, mount style, finish, and part number before ordering.
- Select AES OPYN-PRO-4G pedestal-mount units
- OPYN-PRO-4G powder-coated pedestal applications where the shell assembly is damaged or weathered
- Service replacements where the required part number is OPYN-PRO-4G-PBK-SH
- Installations where the original OPYN-PRO-4G pedestal shell needs replacement without replacing the complete intercom
- Pedestal-mounted OPYN Pro 4G systems where powder-coated black finish is required
Important Compatibility Warning
Do not order this shell by appearance alone. AES uses similar OPYN Pro shell assemblies across 4G, IP, powder-coated, stainless steel, pedestal-mount, and architectural-mount versions. These parts may look similar in photos but are not automatically interchangeable.
- Confirm the required part number is OPYN-PRO-4G-PBK-SH.
- Confirm the installed system is OPYN-PRO-4G, not OPYN-PRO-IP.
- Confirm the unit is pedestal mounted.
- Confirm the finish required is powder-coated black, not stainless steel.
- Confirm this is not being ordered as a complete intercom or callbox.
- Confirm whether any screws, seals, brackets, gaskets, faceplate hardware, or mounting hardware are included with your actual package.
- Confirm that the existing electronics, keypad, reader, camera, wiring, antenna, and internal parts are reusable or being ordered separately.
OPYN-PRO-4G-PBK-SH Compared With Similar AES Parts
| AES Part | General Use | Important Difference |
| OPYN-PRO-4G-PBK-SH | Powder-coated shell assembly for OPYN-PRO-4G pedestal units | This page item; shell/housing only for pedestal-mount 4G version |
| OPYN-PRO-4G-PSK-SH | Stainless steel shell assembly for OPYN-PRO-4G pedestal units | Same OPYN-PRO-4G pedestal family, but stainless steel finish instead of powder-coated black |
| OPYN-PRO-IP-PBK-SH | Powder-coated shell assembly for OPYN-PRO-IP pedestal units | For OPYN-PRO-IP, not OPYN-PRO-4G; verify electronics and model generation before substitution |
| OPYN-PRO-IP-PSK-SH | Stainless steel shell assembly for OPYN-PRO-IP pedestal units | Different model family and finish from this powder-coated 4G pedestal shell |
| OPYN-PRO-ABK-SH | Architectural-mount OPYN Pro shell assembly | Architectural mount style; not the pedestal-mount shell |
| OPYN-PRO-4G-PBK-US | Complete OPYN-PRO-4G powder-coated pedestal callbox | Complete intercom unit with electronics; not the same as shell-only replacement |
| OPYN-PRO-MAIN-PCB | Control board / electronics replacement for OPYN Pro | Electronic board part; does not replace the powder-coated shell |
Similar Parts That Are Not Automatically Interchangeable
- AES OPYN-PRO-4G-PSK-SH: Related OPYN-PRO-4G pedestal shell, but stainless steel instead of powder-coated black.
- AES OPYN-PRO-IP-PBK-SH: Related powder-coated pedestal shell for OPYN-PRO-IP. It should not be substituted for the 4G shell unless AES parts documentation confirms compatibility.
- AES OPYN-PRO-IP-PSK-SH: Related IP pedestal shell with stainless steel finish. It is not the same as this OPYN-PRO-4G powder-coated pedestal shell.
- AES OPYN-PRO architectural-mount shells: Architectural-mount shell assemblies use a different mounting style and should not be treated as the same as pedestal-mount shells.
- AES OPYN-PRO-4G complete callbox: The complete unit includes electronics, keypad, reader, camera, and 4G-related components. This page item is only the shell assembly.
- AES OPYN / OPYN-MULTI parts: Standard OPYN and OPYN-MULTI parts should not be assumed to fit OPYN-PRO-4G pedestal units.
Not Intended For
- Replacing the complete OPYN-PRO-4G intercom
- Replacing the keypad, proximity reader, camera, microphone, speaker, display, or internal electronics
- Replacing an OPYN-PRO-IP shell unless compatibility is confirmed
- Replacing stainless steel shell assemblies where PSK is the required finish
- Replacing architectural-mount shells where the installed unit is not pedestal mounted
- Replacing a main PCB, power supply, PoE injector, 4G router, SIM card, antenna, or cellular accessory
- Repairing network, app, relay, credential, camera, keypad, reader, or cellular connection problems by itself
- Bypassing access control wiring, gate safety devices, emergency access, fire access, or operator safety circuits
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Part Number | OPYN-PRO-4G-PBK-SH |
| Product Type | Shell assembly / housing |
| Product Family | OPYN Pro / OPYN-PRO-4G |
| Compatible Mount Style | Pedestal mount units only |
| Finish / Material | Powder-coated black shell assembly |
| Primary Use | Replacement shell for damaged, weathered, or worn OPYN-PRO-4G pedestal units |
| Electronics Included | No electronics included unless your actual package specifically states otherwise |
| Keypad / Reader Included | No keypad or proximity reader included unless your actual package specifically states otherwise |
| Camera / Screen Included | No camera, screen, speaker, or microphone included unless your actual package specifically states otherwise |
| 4G Router / SIM Included | No 4G router, SIM card, data plan, or antenna included unless your actual package specifically states otherwise |
| Typical Users | Gate access technicians, low-voltage installers, property maintenance teams, and OPYN Pro service departments |
Also Known As / Related Part Numbers
- AES OPYN-PRO-4G-PBK-SH
- OPYN-PRO-4G-PBK-SH
- OPYNPRO4GPBKSH
- AES OPYN Pro 4G Powder-Coated Shell Assembly
- AES OPYN-PRO-4G Pedestal Shell Assembly
- AES OPYN Pro 4G Powder-Coated Pedestal Shell
- AES Powder-Coated Shell Assembly for OPYN-PRO-4G
- AES OPYN-PRO-4G Housing
- AES OPYN Pro 4G Replacement Shell
- OPEN-PRO-4G-PBK-SH - possible listing typo or alternate listing reference; verify before ordering
- OPYN-PRO-4G-PSK-SH - related stainless steel OPYN-PRO-4G pedestal shell, not the same powder-coated shell
- OPYN-PRO-IP-PBK-SH - related powder-coated OPYN-PRO-IP pedestal shell, not the same 4G shell
- OPYN-PRO-IP-PSK-SH - related stainless steel OPYN-PRO-IP pedestal shell, not the same 4G powder-coated shell
- OPYN-PRO-ABK-SH - related architectural-mount shell, not the same pedestal shell
- OPYN-PRO-4G-PBK-US - related complete powder-coated pedestal OPYN-PRO-4G callbox, not the shell-only part
Related Parts and Accessories
- AES OPYN-PRO-4G-PSK-SH stainless steel pedestal shell assembly where stainless finish is required
- AES OPYN-PRO-IP-PBK-SH powder-coated pedestal shell assembly where the installed unit is OPYN-PRO-IP
- AES OPYN-PRO-IP-PSK-SH stainless steel pedestal shell assembly where the installed unit is OPYN-PRO-IP
- AES OPYN-PRO-MAIN-PCB where a compatible OPYN Pro control board is required
- AES OPYN Pro power, PoE, router, SIM, antenna, and access control accessories where confirmed by AES documentation
- Mounting screws, seals, gaskets, service hardware, and internal electronics only where specifically listed for the installed OPYN-PRO-4G model
Technician Note
This part is for physical housing replacement, not electronic troubleshooting. If the OPYN-PRO-4G unit has calling, video, cellular, app, relay, keypad, card reader, or network problems, check power, PoE or 24V input, SIM/data service, router status, antenna, relay wiring, reader wiring, internal PCB, camera module, and system settings before ordering a shell assembly.
The key fitment checks are model, mount style, and finish. OPYN-PRO-4G-PBK-SH should be matched to a pedestal-mounted OPYN-PRO-4G unit requiring a powder-coated black shell. A similar-looking IP shell, architectural shell, or stainless shell may not fit or may not match the installation.
Before Ordering, Confirm
- Confirm the exact part number is OPYN-PRO-4G-PBK-SH.
- Confirm the installed unit is OPYN-PRO-4G.
- Confirm the installed unit is pedestal mounted.
- Confirm powder-coated black finish is required.
- Confirm that OPYN-PRO-4G-PSK-SH is not required instead for a stainless steel pedestal shell.
- Confirm that OPYN-PRO-IP-PBK-SH is not required instead for an IP pedestal unit.
- Confirm that the existing electronics, keypad, reader, camera, 4G router, antenna, and wiring are reusable or being replaced separately.
- Confirm whether screws, seals, gaskets, mounting hardware, or service parts are included with your actual package.
- Confirm this is not being ordered to repair an electronic, network, cellular, relay, or credential problem.
Installation and Service Notes
- Power down the OPYN-PRO-4G system before removing electronics or handling internal wiring.
- Label wiring and take reference photos before removing boards, harnesses, keypad wiring, reader wiring, camera connections, antenna routing, or router connections.
- Transfer only compatible parts into the replacement shell.
- Do not force electronics, brackets, connectors, or screws into the shell if alignment does not match.
- Inspect seals, gaskets, cable entries, antenna openings, and mounting points during reassembly.
- Keep low-voltage access wiring separated from high-voltage gate operator wiring.
- After reassembly, test power, cellular connection, video/audio, keypad operation, proximity reader operation, relay output, and gate or door release.
- Confirm required gate safety devices, emergency access, fire access, and operator safety circuits still work after service.
Professional Advisory
OPYN-PRO-4G shell replacement, internal component transfer, access control wiring, relay wiring, antenna routing, and cellular/network service should be handled by a qualified gate access or low-voltage technician when the unit controls an automated gate or managed entry point. Do not use a shell replacement, wiring change, or service repair to bypass monitored photo eyes, safety edges, emergency access equipment, fire access equipment, access control authorization, or operator safety circuits.
Product Questions & Answers
What is the AES OPYN-PRO-4G-PBK-SH?
The AES OPYN-PRO-4G-PBK-SH is a powder-coated shell assembly for compatible OPYN-PRO-4G pedestal-mounted units. It is used to replace a damaged, weathered, or worn shell.
Is this shell for pedestal-mount units?
Yes. Current listings identify this shell assembly as being for pedestal-mount OPYN-PRO-4G units only. Confirm the installed unit is pedestal mounted before ordering.
Does OPYN-PRO-4G-PBK-SH include the intercom electronics?
No. This is a shell assembly / housing replacement only. It does not include the OPYN-PRO-4G electronics, keypad, reader, camera, speaker, microphone, PCB, power supply, PoE injector, 4G router, SIM card, or antenna.
No. OPYN-PRO-4G-PBK-SH is the powder-coated black pedestal shell. OPYN-PRO-4G-PSK-SH is the related stainless steel pedestal shell for OPYN-PRO-4G applications.
Is this the same as an OPYN-PRO-IP shell?
No. OPYN-PRO-4G-PBK-SH is for OPYN-PRO-4G pedestal applications. OPYN-PRO-IP shell assemblies are related but should not be substituted unless AES parts documentation confirms compatibility.
Can this shell fix an OPYN-PRO-4G that is not working?
Not by itself. This shell replaces the physical housing. If the OPYN-PRO-4G is not powering up, calling, reading credentials, showing video, connecting over 4G, or triggering the relay, the power, wiring, SIM/data service, router, antenna, PCB, reader, camera, and system settings should be checked.
What should be checked before ordering this shell?
Before ordering, confirm the installed unit is OPYN-PRO-4G, the mount style is pedestal, the required finish is powder-coated black, and the existing electronics and service hardware can be transferred or replaced separately.
