HySecurity MX001635-P, MOTOR ASSY, 1 HP, 1PH, 3450RPM
HySecurity MX001635-P is a 1 HP, 60Hz, 1-phase, 3450 RPM motor assembly reference for select HySecurity hydraulic operator applications. It belongs to the MX001635 motor family and should be matched to the operator parts diagram before ordering.
In compatible hydraulic operators, this motor drives the pump assembly that produces hydraulic flow for gate movement. Motor fitment depends on more than horsepower. Voltage, phase, frequency, RPM, shaft and coupler arrangement, pump pack configuration, mounting pattern, and motor brand references must all be checked.
Related listings for the MX001635 family commonly reference 115/208-230VAC 1-phase operation and use on SlideDriver applications. Some related service references include MX001635R as a reconditioned replacement and MX001911 as a Leeson 1 HP 1-phase motor reference. Treat related numbers carefully and verify before substituting.
Common replacement reasons may include failed 1 HP motor, motor hums or will not start after electrical diagnosis, noisy bearings, overheating, tripped overload, weak pump drive, or confirmed motor failure in a compatible hydraulic operator. Always diagnose the complete operator before replacing parts, because a failed mating component, incorrect wiring, hydraulic load, or damaged hardware can cause similar symptoms.
Compatible With
- Select HySecurity hydraulic operators where the parts diagram lists MX001635-P, MX001635, or an approved 1 HP 1-phase 3450 RPM motor assembly.
- Commonly associated with HySecurity SlideDriver applications using the MX001635 1 HP 1-phase motor family.
- May be related to MX001635R reconditioned replacement references and MX001911 Leeson motor references where documentation supports the substitution.
- Use only where motor voltage, phase, frequency, RPM, mount, shaft, coupler, and pump pack configuration match.
- Not interchangeable with 3-phase motors such as MX001636, 3/4 HP motors, 24VDC motors, 1725 RPM motors, or other horsepower assemblies.
Features & Specifications
| Feature | Specification |
|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Product Type | Motor assembly |
| Part Number | MX001635-P |
| Related Motor Family | MX001635 |
| Horsepower | 1 HP |
| Frequency | 60Hz |
| Phase | 1-phase |
| Speed | 3450 RPM |
| Voltage | 115/208-230VAC commonly listed for MX001635 family; verify nameplate |
| Common Operator Family | SlideDriver where listed |
| Notes | Verify motor nameplate and parts diagram |
Also Known As / Related Part Numbers
- MX001635-P
- MX001635
- MX001635R
- MX001911
- HY-MX001635-P
- HYS-MX001635-P
- Nice HySecurity MX001635-P
- 1 HP 1PH 3450 RPM motor assembly
- 115/208-230VAC 1-phase motor reference
- Baldor 1 HP 1PH motor reference - verify brand
- Leeson MX001911 related motor reference - verify before substituting
- MX001636 1 HP 3PH motor - not interchangeable
Technician Note
If replacing a single-phase 1 HP motor, check the starting components, contactor, overload, power supply voltage, pump load, coupler condition, and hydraulic pressure before condemning the motor. A bad start circuit or overloaded pump can make a good motor act failed.
Before Ordering
- Confirm the exact required part number is MX001635-P or an approved MX001635 family replacement.
- Match horsepower, voltage, phase, frequency, and RPM from the motor nameplate.
- Confirm shaft, coupler, mounting, and pump pack compatibility.
- Verify whether the application calls for Baldor, Leeson, new, kit, or reconditioned motor reference.
- Have high-voltage motor work performed by a qualified technician.
Professional Advisory
Motor assemblies are part of a high-voltage hydraulic drive system. Disconnect power before service, keep hands clear of moving gate and pump components, and verify all monitored safety devices after repair.
Questions & Answers
What is MX001635-P used for?
MX001635-P is a 1 HP, 1-phase, 3450 RPM motor assembly reference for select HySecurity hydraulic operator applications where the MX001635 motor family is listed.
Is MX001635-P the same as MX001635R?
Not exactly. MX001635R is commonly used as a reconditioned reference related to MX001635. Verify the exact suffix and condition required before ordering.
Can this be used on a 3-phase operator?
No. This is a 1-phase motor assembly reference. It should not replace a 3-phase motor such as the MX001636 family.
What related part number should I watch for?
MX001911 is a related 1 HP 1-phase Leeson motor reference in some documentation. Do not substitute it unless the parts diagram supports it.
Why is the motor nameplate important?
The nameplate confirms horsepower, voltage, phase, frequency, RPM, and wiring details needed to avoid ordering the wrong motor assembly.
