AES EL00LI-SH, Shell Assembly, EL00LI, Commercial
The AES EL00LI-SH is a replacement shell assembly for select AES EL00LI commercial e-Loop vehicle detection units. It is used when the original shell is damaged, weathered, cracked, faded, or no longer suitable for protecting the internal wireless vehicle detection components.
This shell assembly replaces the physical housing portion of the compatible EL00LI unit. It does not replace the internal detector electronics, radar PCB, receiver, transceiver, battery, magnet, wiring, gate operator input, or the complete vehicle detection system.
The EL00LI-SH should be ordered by exact part number and installed e-Loop model. Do not choose this shell only by appearance, because AES offers several similar e-Loop shell assemblies for commercial, in-ground, mini, and post-mount versions.
What This Shell Assembly Does
The EL00LI-SH provides the replacement outer shell / housing for compatible AES EL00LI e-Loop units. The shell helps protect the internal detection components from normal outdoor exposure, physical wear, and cosmetic damage when installed correctly on the proper EL00LI assembly.
This part does not perform vehicle detection by itself. Detection still depends on the EL00LI sensor electronics, radar PCB or internal detection board where equipped, battery condition, receiver or transceiver pairing, radio range, installation position, and the connected gate operator input.
Compatible With
Use the AES EL00LI-SH only where the installed product, AES documentation, original parts list, or supplier cross-reference confirms EL00LI shell compatibility. Compatibility depends on the exact e-Loop model, housing style, mounting arrangement, and internal component layout.
- Select AES EL00LI e-Loop applications where EL00LI-SH is listed as the replacement shell assembly
- Select AES commercial / light industrial e-Loop applications where the parts diagram confirms EL00LI-SH
- Repairs where the original shell is cracked, weathered, faded, damaged, or missing
- Service work where the internal EL00LI electronics are still usable and only the shell assembly needs replacement
- Applications where the existing mounting style, internal parts, and housing layout match the EL00LI shell design
- Repairs where the original part number, product label, or parts diagram identifies EL00LI-SH
Important Compatibility Warning
Do not assume all AES e-Loop shell assemblies are the same. The EL00LI-SH is for compatible EL00LI applications only. AES also offers related shell assemblies for EL00C, EL00IG, EL00M, and EL00PM e-Loop models, but those housings are tied to different model families and mounting styles.
Current listing wording references EL00LI as a commercial shell assembly and also includes in-ground mount language. Because EL00C, EL00IG, EL00LI, EL00M, and EL00PM shell parts can be easy to confuse, verify the physical package label, installed unit, shell shape, mounting style, and AES documentation before publishing broad fitment claims.
Similar AES e-Loop Parts That Are Not Automatically Interchangeable
- AES EL00LI-SH: Shell assembly for select EL00LI commercial / light industrial e-Loop applications; this is the part described on this page.
- AES EL00LI-RAD-PCB: PCB / electronics part for EL00LI applications; not a shell assembly.
- AES EL00C-SH: Shell assembly for EL00C commercial e-Loop applications; not automatically the same as EL00LI-SH.
- AES EL00IG-SH: Shell assembly for EL00IG in-ground e-Loop applications; different model family and housing style.
- AES EL00M-SH: Shell assembly for EL00M Mini e-Loop applications; not the same as EL00LI-SH.
- AES EL00PM-SH: Shell assembly for EL00PM Post Mount e-Loop applications; not the same mounting style.
- AES EL00LI complete unit: Complete e-Loop product reference; not the same as shell-only replacement.
Not Intended For
- Use as a complete AES e-Loop vehicle detection system by itself
- Replacement for an EL00LI detector, radar PCB, receiver, transceiver, battery, magnet, or control electronics
- Replacement for EL00C, EL00IG, EL00M, EL00PM, or other AES e-Loop shells unless AES documentation confirms compatibility
- Repairing receiver pairing problems, weak radio range, battery failure, water-damaged electronics, or gate operator input issues
- Converting another AES e-Loop model into an EL00LI unit
- Bypassing monitored gate safety inputs, photo eyes, safety edges, access control wiring, or required entrapment protection
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Part Number | EL00LI-SH |
| Product Type | Shell assembly / replacement housing |
| Common Application | AES EL00LI commercial / light industrial e-Loop service and housing replacement |
| Associated Model Family | EL00LI e-Loop; verify exact installed model and shell style before ordering |
| Material | High-impact plastic body, where supplied by AES specification |
| Series Reference | EL00 / EL00LI e-Loop family |
| Primary Use | Replacement for a damaged, weathered, or worn EL00LI shell |
| Mounting Note | Some listing text references in-ground mount use; verify the installed EL00LI housing and AES documentation before publishing final mounting claims |
| Included Components | Shell assembly only unless the product listing or package states otherwise |
| Not Included | e-Loop detector electronics, radar PCB, receiver, transceiver, batteries, magnet, wiring, gate operator, mounting hardware, or complete vehicle detection kit unless specifically stated |
Also Known As / Related Part Numbers
- AES EL00LI-SH
- EL00LI-SH
- AES Global EL00LI-SH
- Nice AES EL00LI-SH
- AES Shell Assembly for EL00LI
- AES Shell Assembly for EL00LI Commercial
- AES EL00LI Commercial Shell Assembly
- AES EL00LI Replacement Shell
- AES EL00LI Replacement Housing
- AES Commercial e-Loop Shell Assembly
- AES Light Industrial e-Loop Shell Assembly
- AES-EL00LI-SH
- EL00LISH, possible search variation only; verify exact part number as EL00LI-SH
- HYS-EL00LI-SH, related distributor-style SKU format only; verify seller SKU before ordering
- EL00LI-RAD-PCB, related EL00LI electronics part; not the same as the shell assembly
- EL00LI, complete e-Loop product reference; not the same as shell-only
Related Parts and Accessories
- AES EL00LI, complete EL00LI e-Loop reference; verify contents before comparing to shell-only replacement
- AES EL00LI-RAD-PCB, PCB / electronics part for EL00LI applications; not a shell assembly
- AES EL00C-SH, shell assembly for EL00C commercial e-Loop; not the same as EL00LI-SH
- AES EL00IG-SH, shell assembly for EL00IG in-ground e-Loop; not the same model family
- AES EL00M-SH, shell assembly for EL00M Mini e-Loop; not the same as EL00LI-SH
- AES EL00PM-SH, shell assembly for EL00PM Post Mount e-Loop; not the same mounting style
- AES e-Loop receivers and transceivers, where required by the installed vehicle detection system
- AES e-Loop batteries, magnets, and service tools, where specified by the installed model
Technician Note
For EL00LI repairs, the shell assembly is the correct part only when the outer housing is the problem and the internal components are still usable. If the unit is not detecting vehicles, not pairing, not transmitting, or not powering up, the cause may be the battery, internal electronics, receiver pairing, signal range, water intrusion, or the gate operator input rather than the shell itself.
Inspect the original shell for cracks, UV damage, loose fasteners, damaged sealing surfaces, and signs of water entry. If the old housing allowed moisture into the electronics, check the internal board and battery area before assuming a shell replacement alone will restore operation.
Before Ordering, Confirm
- The required part number is EL00LI-SH.
- The installed unit is an AES EL00LI e-Loop.
- The repair requires the shell / housing assembly only.
- The internal EL00LI electronics, battery, receiver pairing, and gate operator input are still serviceable.
- The part is not being confused with EL00C-SH, EL00IG-SH, EL00M-SH, EL00PM-SH, or another AES e-Loop shell.
- The package contents are confirmed, especially whether any screws, gasket, seals, labels, or mounting hardware are included.
- The EL00LI installation has not been damaged in a way that requires a complete EL00LI unit or additional hardware.
- The commercial, light industrial, or in-ground wording matches the physical product and AES documentation before publishing final fitment language.
Installation and Service Notes
- Follow AES service instructions for the installed EL00LI e-Loop.
- Power down or open the e-Loop only as directed by the AES service procedure.
- Document the existing internal component position, seal orientation, and mounting arrangement before removing the old shell.
- Do not force internal components, fasteners, or seals into the replacement shell if the fit does not match the original EL00LI layout.
- Inspect for moisture, corrosion, cracked plastic, damaged battery leads, loose fasteners, and worn sealing surfaces before reassembly.
- After replacement, test vehicle detection, receiver response, gate activation input, and normal gate operation.
- Do not bypass monitored gate safety inputs, photo eyes, safety edges, access control wiring, or required entrapment protection during testing.
Professional Advisory
A qualified gate technician should service the system if the e-Loop is not detecting vehicles reliably, the receiver is not responding, the gate activates unexpectedly, the EL00LI unit has water damage, or the operator input behavior is unknown. This shell should only be used for the intended EL00LI housing repair and should not be used to bypass gate safety or access control protections.
Product Questions & Answers
What is the AES EL00LI-SH used for?
The AES EL00LI-SH is used as a replacement shell assembly / housing for select AES EL00LI commercial e-Loop vehicle detection units.
Does EL00LI-SH include the complete e-Loop detector?
No. EL00LI-SH is the shell assembly only. It does not include the e-Loop detector electronics, receiver, transceiver, battery, magnet, wiring, gate operator, or complete vehicle detection system.
Is AES EL00LI-SH the same as EL00LI-RAD-PCB?
No. EL00LI-SH is the replacement shell / housing. EL00LI-RAD-PCB is a related electronics board part and should not be substituted for the shell assembly.
No. EL00LI-SH is for compatible EL00LI applications. EL00C-SH and EL00IG-SH are related shell assemblies for different AES e-Loop model families and are not automatic replacements.
Can this shell fix an EL00LI that is not detecting vehicles?
Only if the problem is related to the damaged shell or housing condition. Detection problems can also be caused by the battery, internal electronics, receiver pairing, radio range, water intrusion, or gate operator input issues.
What material is the EL00LI-SH shell made from?
Current listings describe the EL00LI-SH shell as a high-impact plastic body. Verify the physical product and package contents before ordering if the repair depends on specific hardware or sealing components.
What should I check before ordering AES EL00LI-SH?
Confirm the exact EL00LI-SH part number, installed EL00LI model, shell-only repair need, package contents, and whether the issue is housing-related rather than a battery, electronics, receiver, or installation problem.
