AES MULTI-CL-PSK-SH, 2026 Shell Assembly, MULTICOM CLASSIC, Stainless Steel Pedestal
The AES MULTI-CL-PSK-SH is a replacement shell assembly for compatible AES MULTICOM CLASSIC stainless steel pedestal-mounted units. It is intended for 2026 and newer Multicom Classic pedestal installations where the original housing has been damaged, weathered, dented, corroded, or needs replacement during service.
This part should be treated as the shell / housing assembly only. It does not include the complete Multicom Classic intercom system, cellular motherboard, LCD display, keypad, prox reader, microphone, speaker, power supply, antenna, SIM service, programming, wiring, or access control electronics unless your actual package specifically states otherwise.
Important note: Current supplier data identifies MULTI-CL-PSK-SH as the stainless steel pedestal version for 2026 and newer Multicom Classic models. Some supplier description text may incorrectly reference a powder-coated black body. Treat PSK as the stainless steel pedestal version and verify the actual finish before publishing or ordering for a finish-sensitive project.
What This Part Does
The MULTI-CL-PSK-SH replaces the outer shell / body assembly on compatible AES Multicom Classic pedestal-mounted units. It helps restore the physical housing, appearance, and serviceability of the installed intercom when the original shell is no longer in good condition.
- Replacement shell assembly for compatible AES MULTICOM CLASSIC units
- Designed for 2026 and newer Multicom Classic models only according to current listing data
- Stainless steel pedestal version based on the PSK model designation and product title
- Used for damaged, weathered, dented, or worn callbox housing replacement
- Pedestal-mount housing application only
- Housing part only; not a complete intercom or electronic repair kit
Compatible With
The AES MULTI-CL-PSK-SH is intended for compatible AES Multicom Classic pedestal-mounted units from the 2026-and-newer shell family where the stainless steel PSK shell assembly is required. Compatibility should be verified before ordering because Multicom Classic units can vary by generation, mount style, finish, keypad/display layout, electronics, and enclosure design.
- Compatible AES MULTICOM CLASSIC 2026 and newer pedestal-mounted units
- Multicom Classic installations requiring the stainless steel PSK pedestal shell assembly
- Service repairs where the original shell matches MULTI-CL-PSK-SH
- Pedestal-mounted Multicom Classic housing replacements where the internal electronics are being reused or serviced separately
Important Compatibility Warning
Do not order this shell assembly by appearance only. AES Multicom Classic housings vary by model year, mounting style, finish, and product family. The MULTI-CL-PSK-SH should be matched to the exact installed unit and original housing before ordering.
- Confirm the exact part number is MULTI-CL-PSK-SH.
- Confirm the installed unit is an AES MULTICOM CLASSIC system.
- Confirm the installed system is a 2026 or newer model that uses this shell family.
- Confirm the unit is pedestal mounted, not wall mounted or imperial mounted.
- Confirm the project requires the stainless steel PSK shell, not the powder-coated PBK shell.
- Confirm the shell is not being ordered for an older Multicom Classic generation.
- Confirm the housing is not being confused with OPYN, Opyn Pro, OPYN-MULTI, Prime, or Praetorian parts.
- Confirm whether the original electronics, display, keypad, prox reader, speaker, microphone, lock, wiring, and antenna will be reused or replaced separately.
MULTI-CL-PSK-SH Compared With Similar AES Shell Parts
| AES Part | General Use | Important Difference |
| MULTI-CL-PSK-SH | 2026 Multicom Classic stainless steel pedestal shell assembly | This page item; stainless steel PSK pedestal version for compatible 2026 and newer units |
| MULTI-CL-PBK-SH | 2026 Multicom Classic powder-coated pedestal shell assembly | Same 2026 Multicom Classic pedestal shell family, but powder-coated PBK finish instead of stainless steel PSK |
| MULTI-CL-IBK-SH | 2026 Multicom Classic imperial shell assembly | Imperial housing version; not the same as the pedestal PSK shell |
| MOD-CL-USPS-PBK-SH | Modular 2 inch x 2 inch Multicom Classic shell assembly | Modular shell configuration; not the same as MULTI-CL-PSK-SH |
| MULTI-CLASSIC-MB | Cellular motherboard for Multicom Classic | Electronics board; does not replace the physical shell assembly |
| MULTICOM-LCD-01 | LCD display with cable for Multicom Classic | Display service part; not a replacement housing |
Similar AES Parts That Are Not Automatically Interchangeable
- MULTI-CL-PBK-SH: Powder-coated pedestal shell assembly for compatible 2026 and newer Multicom Classic units. Do not substitute when stainless steel PSK is required.
- MULTI-CL-IBK-SH: Imperial shell assembly for compatible 2026 and newer Multicom Classic units. Not the same as the pedestal shell.
- MOD-CL-USPS-PBK-SH: Modular shell assembly for Multicom Classic. Not the same shell style as MULTI-CL-PSK-SH.
- MULTI-CLASSIC-MB: Cellular motherboard for Multicom Classic. This does not replace the housing.
- MULTICOM-LCD-01: LCD display with cable for Multicom Classic. This does not replace the shell.
- BTN-KIT-ARROWS: Arrow button kit for compatible Multicom Classic applications. This is a button kit, not a shell assembly.
- IBK-KEY: Replacement key set for compatible callbox housings. This does not include the shell or lock assembly.
Not Intended For
- Replacing a complete AES MULTICOM CLASSIC intercom system
- Replacing the cellular motherboard, LCD display, keypad, prox reader, speaker, microphone, antenna, or power supply
- Older Multicom Classic units that do not use the 2026 shell family
- Wall-mount, imperial, or modular shell applications unless the exact fit is confirmed
- OPYN, Opyn Pro, OPYN-MULTI, Prime, Praetorian, or other AES product families
- Repairing programming, cellular, SIM, keypad, display, audio, relay, or network problems without proper diagnosis
- Bypassing access control authorization, emergency access, fire access, or gate safety requirements
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Part Number | MULTI-CL-PSK-SH |
| Product Type | Shell assembly / housing |
| Series | Multicom Classic |
| Model Year Note | For 2026 and newer models only according to current product listing |
| Mount Style | Pedestal mount only according to current product listing |
| Finish / Configuration | Stainless steel pedestal version based on the PSK model designation and product title; verify actual finish due to supplier-description mismatch |
| Typical Use | Replacement housing for damaged or weathered compatible Multicom Classic pedestal units |
| Compatibility Method | Verify by AES model, 2026-and-newer generation, mount style, finish, original housing, and service documentation |
| Not Included | Complete intercom, cellular motherboard, LCD display, keypad, prox reader, speaker, microphone, power supply, SIM service, antenna, wiring, programming, and installation labor unless separately stated |
Also Known As / Related Part Numbers
- AES MULTI-CL-PSK-SH
- MULTI-CL-PSK-SH
- MULTICLPSKSH
- AES 2026 Multicom Classic Stainless Steel Pedestal Shell
- AES Multicom Classic Stainless Steel Pedestal Shell Assembly
- AES Multicom Classic PSK Shell Assembly
- AES MULTICOM CLASSIC Pedestal Housing
- AES Multicom Classic Replacement Shell
- AES Multicom Classic Housing Assembly
- MULTI-CL-PBK-SH - related powder-coated pedestal shell, not the same stainless steel PSK version
- MULTI-CL-IBK-SH - related imperial shell, not the same pedestal shell
- MOD-CL-USPS-PBK-SH - related modular shell assembly, not the same shell configuration
Related Parts and Service Checks
- AES MULTI-CL-PBK-SH where the project requires the powder-coated pedestal shell instead of stainless steel
- AES MULTI-CL-IBK-SH where the project requires the imperial shell version
- AES MULTI-CLASSIC-MB where the Multicom Classic cellular motherboard is the confirmed failed part
- AES MULTICOM-LCD-01 where the LCD display and cable are the confirmed failed parts
- AES BTN-KIT-ARROWS where compatible Multicom Classic arrow buttons are required
- AES microphone, speaker, power, keypad, antenna, and wiring checks when the problem is functional rather than housing-related
Technician Note
The most important checks on this part are model generation, mount style, and finish. MULTI-CL-PSK-SH should be treated as the 2026-and-newer Multicom Classic stainless steel pedestal shell assembly. If the unit is older than the 2026 shell generation, uses a wall-mount or imperial body, or requires powder-coated finish, this may not be the correct housing.
A shell replacement is usually mechanical, but the electronics and wiring still need to be handled carefully. Before transferring components, document all wiring, connectors, grounding, antenna placement, display mounting, keypad wiring, speaker/microphone routing, and seal locations. If the original shell failed from water intrusion or impact damage, correct the cause before reinstalling the electronics.
Before Ordering, Confirm
- Confirm the exact part number is MULTI-CL-PSK-SH.
- Confirm the installed system is AES MULTICOM CLASSIC.
- Confirm the unit is a 2026 or newer model that uses this shell assembly.
- Confirm the unit is pedestal mounted.
- Confirm the project requires the stainless steel PSK shell.
- Confirm the project does not require MULTI-CL-PBK-SH powder-coated pedestal instead.
- Confirm the project does not require MULTI-CL-IBK-SH imperial shell instead.
- Confirm the existing electronics, LCD, keypad, prox reader, speaker, microphone, antenna, lock hardware, and wiring are reusable or being replaced separately.
- Confirm the original shell failure was not caused by water intrusion, impact, corrosion, poor sealing, or installation conditions that need correction.
- Confirm any supplier description mismatch between stainless steel and powder-coated wording before publishing finish-sensitive content.
Installation and Service Notes
- Disconnect power before opening the Multicom Classic unit or transferring internal components.
- Photograph and label wiring before removing electronics from the original shell.
- Handle LCD, keypad, speaker, microphone, prox reader, antenna, and board connectors carefully.
- Do not pull on small leads, ribbon cables, coax cables, or display wiring.
- Inspect seals, gaskets, cable glands, drain paths, and mounting hardware before reassembly.
- Confirm the pedestal mount is secure and properly aligned before installing the replacement shell.
- Keep wiring routed away from pinch points, sharp edges, hinges, covers, and mounting hardware.
- After reassembly, test display, keypad, call function, prox reader where equipped, audio, relay output, cellular connection, and normal visitor operation.
Professional Advisory
Shell replacement on an AES Multicom Classic unit should be handled by a qualified gate access, low-voltage, or access control technician when wiring, component transfer, antenna placement, or weather sealing is involved. Do not bypass access control authorization, emergency access equipment, fire access equipment, monitored photo eyes, safety edges, or gate operator safety inputs while servicing the intercom. If the original housing was damaged by impact, corrosion, water intrusion, vandalism, or improper mounting, correct the underlying issue before reinstalling the internal components.
Product Questions & Answers
What is the AES MULTI-CL-PSK-SH?
The AES MULTI-CL-PSK-SH is a 2026 shell assembly / housing for compatible AES MULTICOM CLASSIC stainless steel pedestal-mounted units.
Is this a complete Multicom Classic intercom?
No. MULTI-CL-PSK-SH is the shell assembly only. It does not include the complete intercom, cellular motherboard, LCD display, keypad, prox reader, speaker, microphone, antenna, power supply, SIM service, or programming.
Is this for 2026 and newer models only?
Yes. Current product data identifies this shell assembly for 2026 and newer Multicom Classic models only. Verify the installed unit generation before ordering.
Is this the stainless steel pedestal version?
Yes. MULTI-CL-PSK-SH should be treated as the stainless steel pedestal version. Verify the actual finish before publishing because some supplier description text may conflict with the stainless steel title.
No. MULTI-CL-PBK-SH is the related powder-coated pedestal shell assembly. MULTI-CL-PSK-SH is the stainless steel pedestal shell assembly.
No. MULTI-CL-IBK-SH is the related imperial shell assembly. MULTI-CL-PSK-SH is the pedestal shell assembly.
Can this be used on older Multicom Classic units?
Do not assume it fits older units. This shell is listed for 2026 and newer Multicom Classic models only, so older units should be verified by model, housing style, and service documentation before ordering.
What should be checked before ordering?
Check the AES model, 2026-and-newer generation, pedestal mount style, stainless steel PSK finish requirement, original shell configuration, internal component reuse, and whether any electronics or service parts are needed separately.
