HySecurity MX5862, XTREMEDRIVE WHEEL KIT, RPLCMT, 8 INCH W/LUG NUTS, 10 PK
The HySecurity MX5862 is an 8 inch XtremeDrive wheel replacement kit with lug nuts for select HySecurity / Nice HySecurity SlideDriver gate operators. This kit is supplied as a 10 pack and is intended for service work where multiple 8 inch XtremeDrive wheels are being replaced or stocked for maintenance.
XtremeDrive wheels are part of the operator's drive system and are responsible for transferring drive force to the gate rail. Because the wheel diameter, hub style, lug nut type, and operator generation all matter, this kit should be matched to the original drive assembly and the current HySecurity parts diagram before ordering.
What This XtremeDrive Wheel Kit Does
The drive wheel is the contact point between the SlideDriver operator and the gate rail. When the wheel grips the rail correctly, the operator can move the slide gate smoothly and consistently. A worn, damaged, glazed, or incorrect wheel can cause slipping, poor gate movement, uneven operation, nuisance faults, or excess wear on the drive system.
The MX5862 kit provides multiple replacement 8 inch XtremeDrive wheels with lug nuts. It is useful for larger service jobs, multi-operator sites, commercial facilities, maintenance contractors, and locations where multiple 8 inch XtremeDrive wheels need to be replaced at the same time.
Compatible With
This kit may be used with the following applications where the operator parts diagram confirms fitment:
- Select HySecurity SlideDriver operator models equipped with 8 inch XtremeDrive wheels
- SlideDriver applications where the current parts diagram lists an 8 inch XtremeDrive wheel replacement
- Repairs where the original drive wheel is confirmed as an 8 inch XtremeDrive wheel
- Service work where the existing wheel hub is reusable and only the wheel and lug nuts are being replaced
- Commercial, industrial, and high-cycle slide gate sites using compatible 8 inch XtremeDrive drive assemblies
Important: This kit should not be assumed to fit every HySecurity SlideDriver operator. Some operators use 6 inch XtremeDrive wheels, AdvanceDrive wheels, older wheel-and-hub assemblies, or different drive configurations. Confirm the model, serial number, wheel diameter, hub style, and parts diagram before ordering.
Similar Parts That Are Not Interchangeable
HySecurity drive wheels can look similar, but size and drive style matter. An 8 inch XtremeDrive wheel should not be replaced with a 6 inch wheel, an AdvanceDrive wheel, or a wheel-and-hub kit unless the HySecurity parts diagram confirms the correct part for that operator.
| Part Number | Description | Interchangeability Note |
| MX5862 | 8 inch XtremeDrive replacement wheel kit with lug nuts, 10 pack | Correct bulk replacement kit where MX5862 or 8 inch XtremeDrive wheel replacement is specified |
| MX5352 | 8 inch XtremeDrive wheel-only kit with lug nuts | Related 8 inch wheel-only service part; not necessarily the same package quantity as MX5862 |
| MX5350 | 8 inch XtremeDrive wheel and hub kit | Includes hub hardware; not the same as a wheel-only replacement kit |
| mx5349-6-inch-xtremedrive-wheel-hub-kit.html">MX5349 | 6 inch XtremeDrive wheel and hub kit | Different wheel diameter; not a substitute for 8 inch applications |
| MX5351 | 6 inch XtremeDrive wheel-only kit with lug nuts | Different wheel diameter; not a substitute for 8 inch applications |
| MX4993 | XtremeDrive lug nuts only | Lug nuts only; does not include replacement wheels |
Not Intended For
- SlideDriver operators using 6 inch XtremeDrive wheels
- SlideDriver operators using AdvanceDrive wheels unless the current parts diagram confirms compatibility
- Applications that require a complete wheel-and-hub kit instead of wheel-only replacement
- Operators with worn, damaged, loose, or incorrect wheel hubs that must be replaced
- Swing gate, barrier arm, wedge, bollard, or non-SlideDriver operator applications
- General-purpose wheel replacement outside the listed HySecurity drive system
Important Compatibility Warning
The MX5862 kit is for 8 inch XtremeDrive wheel replacement. Do not order this kit based only on the operator brand or a visual guess. HySecurity SlideDriver operators may use different wheel diameters and different drive wheel styles depending on model, generation, and configuration.
If the existing wheel hub is worn, damaged, loose on the shaft, missing hardware, or part of an older configuration that needs updating, a wheel-only kit may not be enough. In those cases, compare the operator against the current HySecurity wheel and hub service parts before ordering.
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | HySecurity / Nice HySecurity |
| Part Number | MX5862 |
| Product Type | XtremeDrive replacement wheel kit |
| Wheel Diameter | 8 inch |
| Kit Quantity | 10 pack |
| Included Hardware | Lug nuts included; confirm current package contents before ordering |
| Common Operator Family | Select HySecurity SlideDriver operators using 8 inch XtremeDrive wheels |
| Drive System | XtremeDrive |
| Primary Function | Restores drive wheel contact and traction on compatible SlideDriver operators |
| Hub Included | Not confirmed as a hub kit from the MX5862 description; verify whether your repair requires wheel-only replacement or a complete wheel-and-hub kit |
Also Known As / Related Part Numbers
- MX5862
- MX-5862
- HySecurity MX5862
- Nice HySecurity MX5862
- HYS-MX5862
- HYS MX5862
- HySecurity 8 Inch XtremeDrive Wheel Kit
- HySecurity XtremeDrive Wheel Kit, Replacement, 8 Inch
- 8 Inch XtremeDrive Wheel Kit with Lug Nuts
- XtremeDrive Wheel Kit, RPLCMT, 8 Inch w/Lug Nuts, 10 PK
- MX5352 - related 8 inch XtremeDrive wheel-only kit, not confirmed as the same 10 pack
- MX5350 - related 8 inch XtremeDrive wheel and hub kit, not the same package
- MX4993 - related lug nuts only, not the same as the wheel kit
- MX5351 - related 6 inch XtremeDrive wheel-only kit, not the same diameter
- mx5349-6-inch-xtremedrive-wheel-hub-kit.html">MX5349 - related 6 inch XtremeDrive wheel and hub kit, not the same diameter
Related Parts and Accessories
- MX5352 8 inch XtremeDrive wheel-only kit where a single wheel service kit is required
- MX5350 8 inch XtremeDrive wheel and hub kit where the hub and hardware must also be replaced
- MX4993 XtremeDrive lug nuts only where the wheel is still serviceable
- Drive rail components if wheel wear is caused by rail damage or poor contact
- Hydraulic drive components if slipping is related to drive pressure or drive system performance
- Wheel hub hardware if the wheel is loose, misaligned, or not seating correctly
Technician Note
Do not replace XtremeDrive wheels without checking why the old wheels wore out. Uneven wear, glazing, chunking, slipping, or repeated wheel damage can be caused by a worn rail, poor gate alignment, gate drag, loose wheel hub hardware, incorrect clamping force, hydraulic drive problems, or an operator that is not properly adjusted for the gate load.
Also confirm the existing wheel diameter before ordering. A 6 inch XtremeDrive wheel and an 8 inch XtremeDrive wheel are not interchangeable. If the hub is damaged or the wheel mounting hardware is worn, a wheel-only replacement may not correct the problem.
Before Ordering, Confirm
- The original or required part number is MX5862.
- The operator uses 8 inch XtremeDrive wheels.
- The operator model and serial number match a HySecurity parts diagram that supports this wheel kit.
- The existing wheels are not 6 inch XtremeDrive wheels.
- The operator does not require an AdvanceDrive wheel kit instead.
- The existing wheel hubs are reusable and do not need to be replaced.
- The repair requires a 10 pack quantity.
- Lug nuts are included in the needed package and match the current wheel/hub setup.
- The gate rail is clean, straight, and not causing premature wheel wear.
- The gate moves freely by hand or under proper manual release conditions before blaming the drive wheel alone.
Installation and Service Notes
- Disconnect power and follow proper lockout procedures before servicing the operator.
- Support and secure the gate before working around drive wheels, rails, or moving operator components.
- Inspect the wheel hub, shaft, key, clamping hardware, and lug nut seating before installing new wheels.
- Use the current HySecurity service instructions for torque values and hardware setup.
- Replace damaged lug nuts rather than reusing rounded, cross-threaded, or worn hardware.
- After replacement, check wheel-to-rail contact, gate travel, drive performance, and safety device operation.
- Do not compensate for worn wheels by over-adjusting the drive system without correcting the root cause.
Professional Advisory
Drive wheel replacement on a heavy slide gate operator should be handled carefully. If the repair involves hydraulic drive pressure, heavy gate movement, worn rail, wheel hub removal, shaft hardware, gate alignment, or a gate that is unsafe to move, service should be performed by a qualified gate technician.
Do not bypass safety devices, covers, guards, controller protections, limits, or operator interlocks to test the gate. A slipping or binding slide gate can become a serious hazard if the drive system is forced to run without correcting the mechanical problem.
Product Questions & Answers
What is included with the HySecurity MX5862 kit?
The HySecurity MX5862 is described as an 8 inch XtremeDrive replacement wheel kit with lug nuts supplied as a 10 pack. Confirm current package contents before ordering, especially if hub hardware is also needed.
Is MX5862 for 6 inch or 8 inch XtremeDrive wheels?
MX5862 is for 8 inch XtremeDrive wheel replacement. It should not be used in place of a 6 inch XtremeDrive wheel kit.
Does MX5862 include the wheel hub?
The MX5862 description identifies it as a replacement wheel kit with lug nuts. If the wheel hub is worn or damaged, verify whether a separate wheel-and-hub kit is required instead.
Which HySecurity operators use this wheel kit?
This kit is used with select HySecurity SlideDriver operators equipped with 8 inch XtremeDrive wheels where the current parts diagram confirms the MX5862 or matching 8 inch XtremeDrive wheel replacement.
Can I replace an AdvanceDrive wheel with this XtremeDrive wheel kit?
Do not assume an AdvanceDrive wheel and XtremeDrive wheel are interchangeable. The operator parts diagram should be checked before substituting any drive wheel style.
Why are my XtremeDrive wheels wearing out quickly?
Fast wheel wear can be caused by a rough or dirty rail, gate drag, poor alignment, loose hub hardware, hydraulic drive issues, improper adjustment, or a gate that is too difficult to move.
Should I replace the lug nuts when replacing the drive wheels?
Yes, damaged or worn lug nuts should be replaced. MX5862 is supplied with lug nuts, but the installer should still confirm the hardware matches the current wheel and hub setup.
