GTO R4886 Front Mount (SW2000XLS, SW3000XLS Series)
This is a structural mounting part, not an electronic accessory. On a swing gate actuator, the front mount must line up correctly with the gate bracket and the arm body. If the mount is wrong or the bracket geometry is off, the operator can bind, overextend, or place side load on the actuator.
Compatible With
- GTO PRO-SW2000XLS swing gate operator arms
- GTO PRO-SW2002XLS dual system arm references
- GTO PRO-SW3000XLS swing gate operator arms
- GTO PRO-SW3200XLS second operator arm references
- Select SW2000XL(S) / SW2002XL(S) / SW3000XL(S) / SW3200XL(S) references where confirmed by parts diagram
- Linear PRO / GTO XLS series swing gate operator front mount applications
Also Known As / Related Part Numbers
- R4886
- LIN-R4886
- GTO R4886
- Linear R4886
- Front Mount for SW2000XLS
- Front Mount for SW3000XLS
- Front Mount for SW2000XL(S)/SW2002XL(S) and SW3000XL(S)/SW3200XL(S) in some listings
Features & Specifications
| Manufacturer | GTO / Linear |
|---|
| Product Type | Front mount replacement |
|---|
| Part Number | R4886 |
|---|
| Application | Gate-end front mount for select XLS swing gate operator arms |
|---|
| Compatible Operator Type | Linear actuator swing gate operators |
|---|
| Color | Black |
|---|
| Material / Finish | Molded or finished OEM-style mount, confirm packaging |
|---|
| Notes | Match original mount and operator series before ordering |
|---|
Technician Note
When a front mount fails, inspect the gate bracket, post bracket, pivot points, and arm alignment. A broken front mount can be a symptom of side loading, gate impact, or incorrect bracket measurements.
Before Ordering Checklist
- Confirm the operator is in the SW2000XLS or SW3000XLS family, or a confirmed related model
- Compare the damaged front mount to the replacement shape
- Inspect gate bracket and pivot hardware for wear
- Check that the gate moves freely and the arm is not side-loaded
- For dual systems, verify which arm needs the mount
Professional Advisory
Gate arm mounting parts carry force when the gate moves. If mounting hardware is loose, cracked, or misaligned, stop using the gate and have the installation checked before replacing only the visible broken part.
Important Ordering Warnings
- R4886 is not automatically correct for every XL or XLS arm
- Similar-looking front mounts may not fit the same operator body
- A broken mount may indicate incorrect geometry or a gate problem
- Do not continue operating a gate with a cracked or loose front mount
Product Questions & Answers
What does the R4886 front mount do?
It connects the front/gate end of select swing gate actuator arms to the mounting hardware so the arm can push or pull the gate correctly.
Which models is R4886 commonly listed for?
It is commonly listed for SW2000XLS and SW3000XLS, with some listings also referencing SW2002XLS and SW3200XLS series arms.
Can R4886 be used on older XL operators?
Some listings use XL(S) shorthand, but the safest approach is to verify the original mount and parts diagram before using it on older XL arms.
Why did the front mount break?
Common causes include gate impact, loose brackets, side loading, incorrect installation geometry, or an operator forcing a binding gate.
Should the gate be adjusted before replacing the mount?
Yes. Check gate swing, bracket alignment, stops, and arm travel so the new mount is not damaged by the same problem.
