AES EL00IG-SPARES-KIT, Allen Key (NEW ADDITION DUE TO METRIC SIZES) - 3MM-HEX-KEYMagnet - EL00C-MAG
The AES EL00IG-SPARES-KIT is a 3mm hex key and magnet spares kit for select AES EL00IG / EL00IG-MAG e-Loop in-ground applications. It is used when servicing, reinstalling, or relocating EL00IG in-ground e-Loop hardware where the original service tool or magnet is missing, damaged, or no longer available.
This kit is part of the AES e-Loop service hardware family. It supports field service work on compatible in-ground e-Loop installations, but it does not replace the complete e-Loop sensor, receiver, transceiver, shell assembly, batteries, gate operator input, or full wireless vehicle detection system.
The EL00IG-SPARES-KIT should be ordered by exact part number and loop model. Do not choose this kit only by appearance, because AES has similar spares kits for EL00C, EL00M, and other e-Loop versions.
What This Spares Kit Does
The EL00IG-SPARES-KIT provides service items commonly needed when working on an AES EL00IG in-ground e-Loop. The 3mm hex key is used where the EL00IG hardware requires the metric hex tool, and the magnet is used where the e-Loop setup, coding, or service procedure requires magnet interaction.
This kit is useful when the original installation tool has been misplaced, the e-Loop is being relocated, or a technician needs the correct AES service items available during an EL00IG in-ground loop service call.
Compatible With
Use the AES EL00IG-SPARES-KIT only where the installed product, AES documentation, original parts list, or supplier cross-reference confirms EL00IG compatibility. Compatibility depends on the exact e-Loop model and the service hardware required.
- Select AES EL00IG in-ground e-Loop applications where EL00IG-SPARES-KIT is listed as the correct spares kit
- Select AES EL00IG-MAG service applications where the kit is documented for the installed e-Loop
- EL00IG service work where the original 3mm hex key or setup magnet is missing
- Reinstalling or relocating EL00IG in-ground e-Loop hardware where the AES service procedure calls for this kit
- Repairs where the original spares kit, installation paperwork, or product listing identifies EL00IG-SPARES-KIT
- Service calls where the issue is hardware or setup related and not caused by the e-Loop electronics, receiver, batteries, radio signal, or gate operator input
Important Compatibility Warning
Do not assume all AES e-Loop spares kits are the same. The EL00IG-SPARES-KIT is associated with the EL00IG / EL00IG-MAG in-ground e-Loop family. AES also has related spares kits for EL00C commercial, EL00M Mini, and other e-Loop models. Those kits may include different hardware, magnets, bolts, or model-specific service items.
The product wording provided references EL00C-MAG while the part number is EL00IG-SPARES-KIT. That should be verified before publishing. EL00C-MAG is commonly associated with EL00C spares kit references, while EL00IG-SPARES-KIT is commonly described for EL00IG-MAG service work. Confirm the package label, AES documentation, and actual magnet included before using the EL00C-MAG wording on the live product page.
Similar AES e-Loop Parts That Are Not Automatically Interchangeable
- AES EL00IG-SPARES-KIT: 3mm hex key and magnet kit for select EL00IG / EL00IG-MAG in-ground e-Loop service work.
- AES EL00C-SPARES-KIT: Related spares kit for EL00C applications; commonly listed with 3mm hex key, 5 x 50mm bolts, and EL00C-MAG magnet.
- AES EL00M-SPARES-KIT: Related spares kit for EL00M e-Loop Mini applications; not automatically interchangeable with EL00IG-SPARES-KIT.
- AES EL00IG-MAG: Magnet-related EL00IG reference; verify whether the full spares kit or magnet-only item is required.
- AES EL00C-MAG: Magnet reference commonly associated with EL00C; verify before using with an EL00IG item.
- AES EL00IG-SH: Shell assembly for EL00IG in-ground applications; not the same as the spares kit.
- AES EL00IG: e-Loop in-ground detector product reference; not the same as this hardware / magnet spares kit.
Not Intended For
- Use as a complete AES e-Loop in-ground vehicle detection system by itself
- Replacement for an EL00IG e-Loop sensor, receiver, transceiver, shell assembly, or control electronics
- Replacement for e-Loop batteries or radio communication components
- Replacement for EL00C, EL00M, EL00LI, EL00PM, or other e-Loop model-specific kits unless AES documentation confirms compatibility
- Repairing gate operator input problems, receiver pairing issues, weak radio range, battery issues, or damaged loop electronics
- Bypassing gate safety devices, monitored photo eyes, safety edges, access control wiring, or required entrapment protection
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Part Number | EL00IG-SPARES-KIT |
| Product Type | Allen key and magnet spares kit |
| Common Application | AES EL00IG / EL00IG-MAG in-ground e-Loop service, reinstallation, or relocation work |
| Allen Key | 3mm hex key, where supplied as listed |
| Magnet | Magnet included where supplied as part of the kit; verify whether the package references EL00IG-MAG or EL00C-MAG |
| Bolt Hardware | Not clearly listed as part of EL00IG-SPARES-KIT in current references; verify package contents before adding bolt claims |
| Series Reference | EL00 / e-Loop in-ground service hardware |
| Included Components | 3mm hex key and magnet unless the product listing or package states otherwise |
| Not Included | e-Loop detector, shell assembly, transceiver, receiver, batteries, gate operator, wiring, controller, or complete vehicle detection kit |
Also Known As / Related Part Numbers
- AES EL00IG-SPARES-KIT
- EL00IG-SPARES-KIT
- AES Global EL00IG-SPARES-KIT
- Nice AES EL00IG-SPARES-KIT
- AES Allen Key Kit for EL00IG-MAG
- AES Allen Key Kit with 3mm Hex Key and Magnet for EL00IG
- AES EL00IG e-Loop In-Ground Spares Kit
- AES e-Loop In-Ground Allen Key and Magnet Kit
- AES EL00IG Reinstallation Hardware / Magnet Kit
- AES-EL00IG-SPARES-KIT
- EL00IGSPARESKIT, possible search variation only; verify exact part number as EL00IG-SPARES-KIT
- HYS-EL00IG-SPARES-KIT, related distributor-style SKU format only; verify seller SKU before ordering
- 3MM-HEX-KEY, related kit component reference
- EL00IG-MAG, related EL00IG magnet reference; verify before cross-referencing
- EL00C-MAG, possible related or conflicting magnet reference in some listing titles; verify before using with EL00IG-SPARES-KIT
- EL00C-SPARES-KIT, related EL00C spares kit; not the same as EL00IG-SPARES-KIT
- EL00M-SPARES-KIT, related EL00M Mini spares kit; not the same as EL00IG-SPARES-KIT
Related Parts and Accessories
- AES EL00IG, e-Loop in-ground detector product reference; not the same as this spares kit
- AES EL00IG-SH, shell assembly for EL00IG in-ground applications; not the same as the spares kit
- AES EL00IG-MAG, related magnet reference for EL00IG service work; verify before ordering separately
- AES EL00C-SPARES-KIT, Allen key, bolt hardware, and magnet kit for EL00C-related applications
- AES EL00M-SPARES-KIT, Allen key, bolt hardware, and magnet kit for EL00M Mini-related applications
- AES e-Loop transceivers and receivers, where required by the installed vehicle detection system
- AES e-Loop batteries, where specified by the installed e-Loop model
Technician Note
For EL00IG service work, the most common mistake is mixing up the e-Loop model family. EL00IG, EL00C, and EL00M spares kits may appear similar in a parts list, but they are tied to different e-Loop housings, hardware, and service requirements. Confirm the installed loop model before ordering.
If the in-ground e-Loop is not operating correctly, this spares kit may not solve the problem. Check battery condition, receiver pairing, radio range, magnet setup procedure, loop placement, water exposure, housing condition, and the gate operator input before assuming a missing tool or magnet is the only issue.
Before Ordering, Confirm
- The required part number is EL00IG-SPARES-KIT.
- The installed loop model is AES EL00IG or EL00IG-MAG.
- The repair requires a 3mm hex key and magnet for EL00IG service work.
- The kit is not being confused with EL00C-SPARES-KIT or EL00M-SPARES-KIT.
- The magnet reference has been verified, especially if the listing mentions EL00C-MAG on an EL00IG item.
- The missing or damaged item is hardware or setup related, not the e-Loop detector, receiver, transceiver, battery, or gate operator input.
- The package contents are confirmed, including whether bolts are included or whether the kit contains only the hex key and magnet.
- The e-Loop installation location, housing condition, and service procedure match AES requirements for the installed model.
Installation and Service Notes
- Follow AES installation and service instructions for the EL00IG in-ground e-Loop.
- Use the correct 3mm hex key on matching metric hex hardware to avoid stripping the fasteners.
- Confirm the in-ground housing, cover, and service hardware are seated correctly before returning the loop to operation.
- Do not force incorrect bolts, tools, or hardware that may damage the e-Loop housing or service cover.
- Use the magnet only as directed by the AES setup or coding procedure for the installed e-Loop model.
- After service, test vehicle detection, receiver response, gate activation input, and system behavior before returning the gate to normal use.
- Do not bypass monitored gate safety inputs, photo eyes, safety edges, access control wiring, or required entrapment protection during testing.
Professional Advisory
A qualified gate technician should service the system if the e-Loop is not detecting vehicles reliably, the receiver is not responding, the gate activates unexpectedly, the operator input behavior is unknown, or required safety devices are involved. This kit should only be used for the intended EL00IG hardware and setup work and should not be used to bypass gate safety or access control protections.
Product Questions & Answers
What is the AES EL00IG-SPARES-KIT used for?
The AES EL00IG-SPARES-KIT is used as a 3mm hex key and magnet spares kit for servicing, reinstalling, or relocating select AES EL00IG / EL00IG-MAG e-Loop in-ground applications.
Does the EL00IG-SPARES-KIT include the complete e-Loop detector?
No. EL00IG-SPARES-KIT is a service spares kit only. It does not include the e-Loop detector, receiver, transceiver, batteries, shell assembly, gate operator, wiring, or complete vehicle detection kit.
What parts are included with AES EL00IG-SPARES-KIT?
Current references list the EL00IG-SPARES-KIT with a 3mm hex key and magnet. Verify the exact package contents before ordering, especially if the listing mentions bolts or a specific magnet part number.
Is EL00IG-SPARES-KIT the same as EL00C-SPARES-KIT?
No. EL00IG-SPARES-KIT is associated with EL00IG / EL00IG-MAG in-ground e-Loop service work, while EL00C-SPARES-KIT is a related kit for EL00C applications. They should not be treated as automatic replacements.
Is EL00C-MAG the correct magnet for EL00IG-SPARES-KIT?
Verify before ordering or publishing. EL00C-MAG is commonly associated with EL00C kit references, while EL00IG-SPARES-KIT listings are commonly described for EL00IG-MAG service work.
Can this kit fix an EL00IG e-Loop that is not detecting vehicles?
Only if the problem is related to missing or incorrect service hardware or magnet setup. Detection problems can also be caused by batteries, receiver pairing, radio range, mounting location, water exposure, or gate operator input issues.
What should I check before ordering AES EL00IG-SPARES-KIT?
Confirm the exact EL00IG-SPARES-KIT part number, EL00IG e-Loop model, required 3mm hex key, magnet reference, package contents, and whether the issue is hardware-related rather than an electronics, receiver, battery, or installation problem.
