AES EL00C-SPARES-KIT, Allen Key (NEW ADDITION DUE TO METRIC SIZES) 3MM-HEX-KEYBolts - H-CS-5x50MMMagnet - EL00C-MAG
The AES EL00C-SPARES-KIT is a 3mm hex key, bolt, and magnet spares kit for select AES EL00C / EL00C-MAG e-Loop applications. It is commonly used when reinstalling, relocating, or servicing EL00C e-Loop hardware where the original service tool, bolts, or magnet are missing, damaged, or no longer available.
This kit is part of the AES e-Loop service hardware family. It provides the small installation and service items needed for compatible EL00C hardware work, but it does not replace the e-Loop detector, receiver, transceiver, batteries, gate operator input, or the complete wireless vehicle detection system.
The EL00C-SPARES-KIT should be ordered by exact part number and loop model. Do not choose this kit only by appearance, since AES has similar spares kits for EL00M, EL00IG, and other e-Loop versions.
What This Spares Kit Does
The EL00C-SPARES-KIT provides replacement service items commonly needed when working on an AES EL00C e-Loop. The 3mm hex key is used where the updated metric hardware requires it, the 5 x 50mm bolts are used for compatible EL00C mounting work, and the EL00C-MAG magnet is used where the EL00C setup, coding, or service procedure requires magnet interaction.
This kit is useful when the original installation hardware has been misplaced, the e-Loop is being relocated, or a technician needs the correct AES service items available during an EL00C e-Loop service call.
Compatible With
Use the AES EL00C-SPARES-KIT only where the installed product, AES documentation, original parts list, or supplier cross-reference confirms EL00C compatibility. Compatibility depends on the exact e-Loop model and service hardware required.
- Select AES EL00C e-Loop applications where EL00C-SPARES-KIT is listed as the correct service kit
- Select AES EL00C-MAG applications where the kit is documented for the installed e-Loop hardware
- EL00C service work where the original 3mm hex key, bolt hardware, or setup magnet is missing
- Reinstalling or relocating EL00C e-Loop hardware where the AES service procedure calls for this kit
- Repairs where the original spares kit, installation paperwork, or product listing identifies EL00C-SPARES-KIT
- Service calls where the issue is hardware or setup related and not caused by the e-Loop electronics, receiver, batteries, radio signal, or gate operator input
Important Compatibility Warning
Do not assume all AES e-Loop spares kits are the same. The EL00C-SPARES-KIT is associated with EL00C / EL00C-MAG service work. AES also has related spares kits for EL00M Mini, EL00IG in-ground, and other e-Loop models. Those kits may include different hardware, magnets, bolts, or model-specific service items.
If the installed loop is EL00M, EL00IG, EL00LI, EL00PM, or another AES e-Loop model, verify the correct spares kit before ordering. Using the wrong hardware, magnet, or service tool may cause fitment problems or delay the repair.
Similar AES e-Loop Parts That Are Not Automatically Interchangeable
- AES EL00C-SPARES-KIT: 3mm hex key, 5 x 50mm bolts, and EL00C-MAG magnet kit for select EL00C service work.
- AES EL00M-SPARES-KIT: Related spares kit for EL00M e-Loop Mini applications; not automatically interchangeable with EL00C-SPARES-KIT.
- AES EL00IG-SPARES-KIT: Related 3mm hex key and magnet kit for EL00IG / EL00IG-MAG in-ground applications; not the same as the EL00C kit.
- AES EL00C-MAG: Magnet reference for EL00C service work; verify whether the full kit or magnet-only item is required.
- AES EL00C-B: Replacement battery reference for EL00C applications; not the same as this spares kit.
- AES EL00C: e-Loop detector product reference; not the same as the service hardware kit.
- AES e-Loop receiver or transceiver parts: Required for some system repairs, but not included with this spares kit.
Not Intended For
- Use as a complete AES e-Loop vehicle detection system by itself
- Replacement for an EL00C e-Loop sensor, receiver, transceiver, shell assembly, or control electronics
- Replacement for e-Loop batteries or radio communication components
- Replacement for EL00M, EL00IG, EL00LI, EL00PM, or other e-Loop model-specific kits unless AES documentation confirms compatibility
- Repairing gate operator input problems, receiver pairing issues, weak radio range, battery issues, or damaged loop electronics
- Bypassing gate safety devices, monitored photo eyes, safety edges, access control wiring, or required entrapment protection
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Part Number | EL00C-SPARES-KIT |
| Product Type | Allen key, bolt, and magnet spares kit |
| Common Application | AES EL00C / EL00C-MAG e-Loop service, reinstallation, or relocation work |
| Allen Key | 3mm hex key, where supplied as listed |
| Bolt Hardware | H-CS-5x50MM / 5 x 50mm bolts, where supplied as listed |
| Magnet Reference | EL00C-MAG, where supplied as part of the kit |
| Series Reference | EL00 / e-Loop service hardware |
| Included Components | 3mm hex key, 5 x 50mm bolt hardware, and EL00C-MAG magnet unless the product listing or package states otherwise |
| Not Included | e-Loop detector, shell assembly, receiver, transceiver, batteries, gate operator, wiring, controller, or complete vehicle detection kit |
Also Known As / Related Part Numbers
- AES EL00C-SPARES-KIT
- EL00C-SPARES-KIT
- AES Global EL00C-SPARES-KIT
- Nice AES EL00C-SPARES-KIT
- AES Allen Key Kit for EL00C-MAG
- AES Allen Key Kit with 3mm Hex Key, Bolts and Magnet
- AES 3mm Hex Key, 5 x 50mm Bolts and EL00C-MAG Magnet Kit
- AES EL00C e-Loop Spares Kit
- AES EL00C Reinstallation Hardware Kit
- AES e-Loop Allen Key, Bolt and Magnet Kit
- AES-EL00C-SPARES-KIT
- EL00CSPARESKIT, possible search variation only; verify exact part number as EL00C-SPARES-KIT
- HYS-EL00C-SPARES-KIT, related distributor-style SKU format only; verify seller SKU before ordering
- 3MM-HEX-KEY, related kit component reference
- H-CS-5x50MM, related bolt hardware reference
- EL00C-MAG, related magnet reference for EL00C service work
- EL00M-SPARES-KIT, related EL00M Mini spares kit; not the same as EL00C-SPARES-KIT
- EL00IG-SPARES-KIT, related EL00IG in-ground spares kit; not the same as EL00C-SPARES-KIT
Related Parts and Accessories
- AES EL00C, e-Loop detector product reference; not the same as this spares kit
- AES EL00C-MAG, related magnet reference for EL00C service work; verify whether magnet-only or full kit is required
- AES EL00C-B, related replacement battery reference; not the same as the spares kit
- AES EL00M-SPARES-KIT, Allen key, bolt hardware, and magnet kit for EL00M Mini-related applications
- AES EL00IG-SPARES-KIT, Allen key and magnet kit for EL00IG in-ground-related applications
- AES e-Loop receivers and transceivers, where required by the installed vehicle detection system
- AES e-Loop batteries, where specified by the installed e-Loop model
Technician Note
For EL00C service work, the most common mistake is mixing up the AES e-Loop model family. EL00C, EL00M, and EL00IG spares kits may appear similar in a parts list, but they are tied to different e-Loop hardware references and service requirements. Confirm the installed loop model before ordering.
If the EL00C e-Loop is not operating correctly, this spares kit may not solve the problem. Check battery condition, receiver pairing, radio range, magnet setup procedure, loop placement, water exposure, housing condition, and the gate operator input before assuming a missing tool, bolt, or magnet is the only issue.
Before Ordering, Confirm
- The required part number is EL00C-SPARES-KIT.
- The installed loop model is AES EL00C or EL00C-MAG.
- The repair requires a 3mm hex key, 5 x 50mm bolt hardware, and EL00C-MAG magnet.
- The kit is not being confused with EL00M-SPARES-KIT or EL00IG-SPARES-KIT.
- The missing or damaged item is hardware or setup related, not the e-Loop detector, receiver, transceiver, battery, or gate operator input.
- The package contents are confirmed, including bolt quantity, magnet inclusion, and any additional hardware supplied with the kit.
- The e-Loop installation location, housing condition, and service procedure match AES requirements for the installed model.
Installation and Service Notes
- Follow AES installation and service instructions for the EL00C e-Loop.
- Use the correct 3mm hex key on matching metric hex hardware to avoid stripping the fasteners.
- Confirm the loop housing, mounting hardware, and service parts are seated correctly before returning the loop to operation.
- Do not force incorrect bolts, tools, or substitute hardware that may damage the e-Loop housing or mounting surface.
- Use the magnet only as directed by the AES setup or coding procedure for the installed e-Loop model.
- After service, test vehicle detection, receiver response, gate activation input, and system behavior before returning the gate to normal use.
- Do not bypass monitored gate safety inputs, photo eyes, safety edges, access control wiring, or required entrapment protection during testing.
Professional Advisory
A qualified gate technician should service the system if the e-Loop is not detecting vehicles reliably, the receiver is not responding, the gate activates unexpectedly, the operator input behavior is unknown, or required safety devices are involved. This kit should only be used for the intended EL00C hardware and setup work and should not be used to bypass gate safety or access control protections.
Product Questions & Answers
What is the AES EL00C-SPARES-KIT used for?
The AES EL00C-SPARES-KIT is used as a 3mm hex key, bolt, and magnet spares kit for servicing, reinstalling, or relocating select AES EL00C / EL00C-MAG e-Loop applications.
Does the EL00C-SPARES-KIT include the complete e-Loop detector?
No. EL00C-SPARES-KIT is a service hardware kit only. It does not include the e-Loop detector, receiver, transceiver, batteries, shell assembly, gate operator, wiring, or complete vehicle detection kit.
What parts are included with AES EL00C-SPARES-KIT?
The kit is listed with a 3mm hex key, 5 x 50mm bolt hardware, and an EL00C-MAG magnet. Confirm the exact bolt quantity and package contents before ordering.
Is EL00C-SPARES-KIT the same as EL00M-SPARES-KIT?
No. EL00C-SPARES-KIT is associated with EL00C service work, while EL00M-SPARES-KIT is a related kit for EL00M e-Loop Mini applications. They should not be treated as automatic replacements.
No. EL00IG-SPARES-KIT is a related kit for EL00IG / EL00IG-MAG in-ground e-Loop service work. Confirm the installed e-Loop model before substituting any AES spares kit.
Can this kit fix an EL00C e-Loop that is not detecting vehicles?
Only if the problem is related to missing or incorrect service hardware or magnet setup. Detection problems can also be caused by batteries, receiver pairing, radio range, mounting location, water exposure, or gate operator input issues.
What should I check before ordering AES EL00C-SPARES-KIT?
Confirm the exact EL00C-SPARES-KIT part number, EL00C e-Loop model, required 3mm hex key, bolt hardware, EL00C-MAG magnet, package contents, and whether the issue is hardware-related rather than an electronics, receiver, battery, or installation problem.
