AES EL00IG-B, 1x "D" Battery wrapped - Replacement for Commercial InGround eLoop 3.6V Lithium Ion
The AES EL00IG-B is a replacement 3.6V D battery for select AES commercial in-ground e-Loop exit and presence applications. It is commonly used when the installed AES EL00IG-style e-Loop requires a matching soldered or wrapped D-size lithium replacement battery assembly.
This battery supports the power needs of the compatible in-ground wireless vehicle detection sensor. In the correct system, the e-Loop detects vehicle presence or exit movement and communicates with the receiver or transceiver used by the gate control system.
The EL00IG-B should be ordered by exact part number and installed e-Loop model. Do not choose this battery only by size or voltage, because AES e-Loop products can use different battery formats, wiring, packaging, and chemistry requirements.
What This Replacement Battery Does
The EL00IG-B provides replacement battery power for compatible AES in-ground e-Loop sensors. When the original battery is weak, expired, disconnected, or unable to hold the required operating voltage, the e-Loop may stop detecting reliably or may stop communicating with the receiver.
This battery does not repair the complete detection system by itself. Vehicle detection still depends on the e-Loop electronics, receiver or transceiver, pairing, radio range, installation location, housing condition, and the connected gate operator input.
Compatible With
Use the AES EL00IG-B only where the installed loop, parts list, product label, or AES documentation confirms this exact battery is required. Compatibility depends on the e-Loop model, battery compartment, lead configuration, polarity, voltage, and battery type.
- Select AES EL00IG commercial in-ground e-Loop applications where EL00IG-B is listed as the replacement battery
- Select AES inground exit e-Loop applications requiring a soldered single 3.6V D battery assembly
- Select AES inground presence e-Loop applications requiring the same EL00IG-B battery format
- Repairs where the original battery is marked, listed, or cross-referenced as EL00IG-B
- Service work where the existing battery configuration, polarity, and lead style match the EL00IG-B replacement
- Applications where the e-Loop electronics, receiver pairing, and gate operator input have been confirmed operational
Important Compatibility Warning
Do not replace this battery with a standard alkaline D cell, rechargeable lithium-ion D cell, generic battery pack, or field-soldered substitute unless AES documentation confirms the exact specification. Battery voltage, chemistry, discharge behavior, lead configuration, and polarity matter on wireless e-Loop sensors.
The EL00IG-B is commonly listed as a 3.6V D battery for inground exit and presence e-Loops. The product title may use wording such as lithium, lithium ion, wrapped, or soldered. Before publishing or ordering, verify the exact battery chemistry and package configuration from the physical label or AES documentation. Many 3.6V industrial lithium batteries are primary, non-rechargeable batteries and should not be described as rechargeable unless confirmed.
Similar AES Battery Parts That Are Not Automatically Interchangeable
- AES EL00IG-B: Replacement soldered single 3.6V D battery for select inground exit/presence e-Loop applications.
- AES EL00C-B: Related commercial e-Loop battery reference commonly described as an individual AA 3.6V battery for commercial e-Loop systems; not the same as EL00IG-B.
- AES EL00M battery references: Mini e-Loop battery requirements may differ and should not be substituted for EL00IG-B.
- AES EL00IG-SPARES-KIT: Hex key and magnet service kit; not a battery replacement.
- AES EL00IG-SH: Shell or housing-related part; not a battery.
- Generic 3.6V D lithium batteries: May not match the correct lead style, polarity, wrapping, current behavior, or AES-approved format.
- Access One BATT-3.6-19D: Similar voltage/size style for a different product family; not automatically interchangeable with AES EL00IG-B.
Not Intended For
- Use as a complete AES e-Loop detector or wireless vehicle detection system by itself
- Replacement for an AES receiver, transceiver, shell, magnet, hardware kit, or control electronics
- Replacement for EL00C-B, EL00M batteries, or batteries used in other AES e-Loop models unless AES documentation confirms compatibility
- Use as a rechargeable lithium-ion battery unless the physical packaging or AES documentation confirms that chemistry
- Repairing receiver pairing problems, weak radio range, water-damaged electronics, damaged housings, or gate operator input issues
- Bypassing monitored gate safety inputs, photo eyes, safety edges, access control wiring, or required entrapment protection
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Part Number | EL00IG-B |
| Product Type | Replacement e-Loop battery |
| Battery Size | D-size battery format, where supplied as listed |
| Voltage | 3.6V |
| Battery Configuration | Soldered or wrapped single D battery assembly; verify lead style and package before ordering |
| Battery Chemistry | 3.6V lithium battery; verify exact chemistry and whether it is non-rechargeable from the battery label or AES documentation |
| Common Application | Select AES commercial in-ground e-Loop exit and presence applications |
| Associated e-Loop Family | AES EL00IG inground e-Loop, where confirmed by parts documentation |
| Included Components | One replacement 3.6V D battery assembly unless the product listing or packaging states otherwise |
| Not Included | e-Loop detector, receiver, transceiver, shell, magnet, hardware kit, wiring, gate operator, or complete vehicle detection kit |
Also Known As / Related Part Numbers
- AES EL00IG-B
- EL00IG-B
- AES Global EL00IG-B
- Nice AES EL00IG-B
- AES Soldered Single D Battery for Inground e-Loop
- AES 3.6V D Battery for Inground Exit e-Loop
- AES 3.6V D Battery for Inground Presence e-Loop
- AES Commercial In-Ground e-Loop Battery
- AES Inground e-Loop Replacement Battery
- AES EL00IG Replacement Battery
- AES-EL00IG-B
- EL00IGB, possible search variation only; verify exact part number as EL00IG-B
- HYS-EL00IG-B, related distributor-style SKU format only; verify seller SKU before ordering
- EL00C-B, related AES battery for a different e-Loop battery format; not the same as EL00IG-B
- BATT-3.6-19D, similar 3.6V D battery reference from another product family; not the same AES part
Related Parts and Accessories
- AES EL00IG, commercial in-ground e-Loop detector product reference; not the same as the battery
- AES EL00IG-SPARES-KIT, 3mm hex key and magnet kit for EL00IG service work; not a battery
- AES EL00IG-SH, shell or housing-related part for EL00IG applications; not a battery
- AES EL00C-B, related commercial e-Loop AA battery reference; not interchangeable unless AES confirms
- AES EL00C-SPARES-KIT, related spares kit for EL00C applications; not a battery replacement for EL00IG-B
- AES e-Loop receivers and transceivers, where required by the installed vehicle detection system
- AES e-Loop magnets and setup tools, where required by the installed model
Technician Note
When an AES in-ground e-Loop stops working, the battery is one of the first items to check, but it is not the only possible cause. Receiver pairing, weak radio range, water intrusion, damaged housing, corroded battery leads, incorrect polarity, low signal strength, or gate operator input problems can all look like a failed battery.
Do not make up a replacement pack from generic lithium cells unless the voltage, chemistry, lead style, polarity, insulation, and AES requirements are confirmed. Battery damage or incorrect polarity can damage the e-Loop electronics and may create an unsafe or unreliable vehicle detection condition.
Before Ordering, Confirm
- The required part number is EL00IG-B.
- The installed loop is an AES commercial in-ground e-Loop that uses this battery format.
- The original battery is a 3.6V D-size soldered or wrapped replacement assembly.
- The lead style, connector style, polarity, and battery placement match the original battery.
- The repair does not require EL00C-B, EL00M batteries, or another AES e-Loop battery part.
- The battery issue is not actually caused by receiver pairing, radio range, damaged wiring, corrosion, water intrusion, or gate operator input problems.
- The package contents are confirmed, including whether this is one battery assembly only.
- The battery chemistry wording is confirmed before publishing rechargeable or lithium-ion claims.
Installation and Service Notes
- Follow AES service instructions for the installed in-ground e-Loop model.
- Disconnect or power down the e-Loop as directed before replacing the battery.
- Observe polarity and wire routing before removing the old battery.
- Do not short the battery leads, puncture the battery, crush the battery, or expose it to excessive heat.
- Do not solder directly to a replacement cell in the field unless the battery is specifically designed and approved for that procedure.
- Inspect the battery area for water intrusion, corrosion, damaged insulation, loose leads, and cracked housing parts before reassembly.
- After replacement, test e-Loop detection, receiver response, gate activation input, and normal gate operation.
- Do not bypass monitored gate safety inputs, photo eyes, safety edges, access control wiring, or required entrapment protection during testing.
Professional Advisory
A qualified gate technician should service the system if the e-Loop is not detecting vehicles reliably, the receiver is not responding, the gate activates unexpectedly, the operator input behavior is unknown, or required gate safety devices are involved. Replace the battery only with the correct AES-specified part and do not bypass gate safety or access control protections to make the system operate.
Product Questions & Answers
What is the AES EL00IG-B used for?
The AES EL00IG-B is used as a replacement 3.6V D battery for select AES commercial in-ground e-Loop exit and presence applications.
Is EL00IG-B a complete e-Loop detector?
No. EL00IG-B is a replacement battery only. It does not include the e-Loop detector, receiver, transceiver, shell, wiring, gate operator, or complete vehicle detection system.
Is AES EL00IG-B the same as EL00C-B?
No. EL00IG-B is commonly listed as a 3.6V D battery for inground e-Loop applications, while EL00C-B is a related 3.6V AA battery reference for a different commercial e-Loop battery format.
Can I replace EL00IG-B with a standard D battery?
No. Do not use a standard alkaline D battery or generic rechargeable D cell unless AES documentation confirms compatibility. The replacement must match the required 3.6V battery type, lead configuration, polarity, and packaging.
Is the AES EL00IG-B battery rechargeable?
Do not assume it is rechargeable. Current listings describe EL00IG-B as a 3.6V lithium replacement battery, but the exact chemistry and rechargeable status should be confirmed from the physical battery label or AES documentation.
Will a new EL00IG-B fix an e-Loop that is not detecting vehicles?
It may fix the issue if the original battery is weak or failed, but detection problems can also be caused by receiver pairing, radio range, water intrusion, damaged housing, corrosion, or gate operator input issues.
What should I check before ordering AES EL00IG-B?
Confirm the exact EL00IG-B part number, installed e-Loop model, 3.6V D battery requirement, lead style, polarity, package contents, and whether the problem is truly battery-related before ordering.
