HySecurity MX002652, BRACKET, WOOD ARM ASSY, SAP
HySecurity MX002652 is a wood arm bracket assembly with hardware for select HySecurity StrongArmPark DC barrier arm applications. Current listings describe MX002652 as a wood arm bracket that attaches to a 1 inch x 4 inch wood arm.
This bracket is used where the StrongArmPark DC arm hardware setup calls for a wood arm bracket. The wood arm itself is not supplied by Nice HySecurity and must be purchased separately. Because barrier arm hardware varies by arm material, arm size, bracket style, breakaway setup, harness setup, and operator configuration, MX002652 should be selected only after confirming the operator model and HySecurity parts diagram.
What This Wood Arm Bracket Does
The wood arm bracket secures a compatible 1 inch x 4 inch wood barrier arm to the approved StrongArmPark DC arm mounting hardware. It provides the mechanical attachment point between the operator arm hardware and the wood arm used in many parking and traffic control applications.
A worn, bent, cracked, loose, or incorrect arm bracket can cause the barrier arm to sag, twist, sit out of alignment, loosen during operation, or fail after impact. Similar symptoms can also be caused by a damaged wood arm, loose mounting hardware, incorrect arm size, worn breakaway hardware, bent arm mount, damaged pivot hardware, poor counterbalance, or prior non-factory repairs.
Compatible With
Use HySecurity MX002652 only where the operator parts diagram, original bracket, or HySecurity documentation confirms this part number.
- Select HySecurity StrongArmPark DC applications where MX002652 is listed as the wood arm bracket assembly.
- StrongArmPark DC arm hardware repairs using a 1 inch x 4 inch wood arm where the parts diagram confirms MX002652.
- Parking barrier arm installations where the arm material, bracket style, and mounting hardware match the HySecurity parts diagram.
- Repairs where the original bracket is marked, listed, or cross-referenced as HySecurity MX002652.
- Applications where the wood arm is supplied separately and the bracket/hardware arrangement matches the original installation.
Important Compatibility Warning
Do not order MX002652 based only on the word "arm bracket." This part is specifically listed as a wood arm bracket assembly for 1 inch x 4 inch wood arm applications. It is not automatically interchangeable with aluminum oval arm brackets, fiberglass arm brackets, PVC arm brackets, breakaway brackets, articulating arm brackets, or lighted arm hardware.
Nice HySecurity does not supply the wood arm. If replacing a damaged arm setup, confirm that the replacement wood arm is the correct size, straight, properly finished, and compatible with the installed StrongArmPark DC arm hardware. A wrong-size wood arm can loosen, split, or fail at the bracket.
Similar Parts That Are Not Automatically Interchangeable
- mx001090-p-side-mount-bracket-clamps-aluminum-arm.html">mx001090-p-side-mount-bracket-clamps-aluminum-arm.html">mx001090-p-side-mount-bracket-clamps-aluminum-arm.html">mx001090-p-side-mount-bracket-clamps-aluminum-arm.html">HySecurity MX001090-P - bracket and clamps for aluminum arm applications; not the same as MX002652.
- mx001043-p-side-mount-bracket-clamps-fiberglass-arm.html">mx001043-p-side-mount-bracket-clamps-fiberglass-arm.html">mx001043-p-side-mount-bracket-clamps-fiberglass-arm.html">mx001043-p-side-mount-bracket-clamps-fiberglass-arm.html">HySecurity MX001043-P - bracket and clamps for fiberglass arm applications; not the same as MX002652.
- mx001044-side-mount-bracket-clamps-wood-arm.html">HySecurity MX001044 - side mount bracket and clamps for wood arm references; not automatically the same as MX002652.
- mx4050-breakaway-arm-bracket-kill-switch-kit.html">HySecurity MX4050 - breakaway arm bracket with kill switch kit; not the same as a standard wood arm bracket assembly.
- mx3827-breakaway-arm-bracket-kit-kill-switch-strongarm-14f.html">HySecurity MX3827 - breakaway arm bracket with kill switch kit reference; not the same as MX002652.
- HySecurity MX4122 - LED light / kill switch harness; wiring harness, not the wood arm bracket.
- HySecurity MX4402 - kill switch kit; switch kit, not the wood arm bracket assembly.
- HySecurity MX4124 series - flexible LED light strips; not arm bracket hardware.
- HySecurity MX4182 arm assemblies - aluminum oval arm assemblies, not the wood arm bracket.
- Generic wood arm brackets - not confirmed substitutes unless the size, mounting pattern, hardware, and parts diagram match.
Not Intended For
- Wood arm replacement; the wood arm is purchased separately.
- Aluminum oval arm bracket replacement.
- Fiberglass arm bracket replacement.
- PVC arm bracket replacement.
- Breakaway arm bracket with kill switch replacement.
- Kill switch, stop switch, or LED light / kill switch harness replacement.
- Flexible LED light strip replacement.
- Target magnet, Hall-effect sensor, controller, motor, gearbox, or power supply replacement.
- Complete barrier arm or articulating arm assembly replacement.
- Any arm setup where the parts diagram does not list MX002652.
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | HySecurity / Nice HySecurity |
| Part Number | MX002652 |
| Product Type | Wood arm bracket assembly with hardware |
| Common Description | Bracket, Wood Arm Assy, SAP |
| Common Application | Select HySecurity StrongArmPark DC barrier arm applications |
| Arm Type | 1 inch x 4 inch wood arm where specified |
| Wood Arm Included | No. Wood arm must be purchased separately |
| Hardware Note | Current listings describe the bracket as supplied with hardware; verify current package contents before ordering |
| Operator Family | StrongArmPark DC / SAP where listed by parts diagram |
| Package Contents | Verify before ordering; bracket hardware may be included, but wood arm, breakaway switch, harness, lights, covers, and arm accessories may be separate |
Also Known As / Related Part Numbers
- MX002652
- HySecurity MX002652
- Nice HySecurity MX002652
- HYS-MX002652
- HYS-mx002652
- MX002652-5128
- HY-MX002652
- HySecurity wood arm bracket
- HySecurity StrongArmPark DC wood arm bracket
- HySecurity bracket, wood arm assy, SAP
- StrongArmPark DC wood arm bracket with hardware
- Bracket attaches to 1 inch x 4 inch wood arm
- mx001090-p-side-mount-bracket-clamps-aluminum-arm.html">MX001090-P - related aluminum arm bracket and clamps; not the same part
- mx001043-p-side-mount-bracket-clamps-fiberglass-arm.html">MX001043-P - related fiberglass arm bracket and clamps; not the same part
- MX001044 - related wood side-mount bracket reference; not automatically the same part
- MX4050 - related breakaway arm bracket with kill switch kit; not the same part
- MX4122 - related LED light / kill switch harness; not the same part
Related Parts and Accessories
The correct related parts depend on the installed StrongArmPark DC arm style, arm material, breakaway setup, and reason for replacement. Inspect the full arm mounting system before ordering only the bracket assembly.
- 1 inch x 4 inch wood arm - required separately; not supplied by Nice HySecurity.
- MX4050 breakaway arm bracket with kill switch kit - related breakaway hardware, not the same as MX002652.
- MX4122 LED light / kill switch harness - related harness part, not the bracket assembly.
- MX4402 kill switch kit - related switch kit, not the wood arm bracket.
- MX4124 flexible LED light strips - related lighted arm parts, not bracket hardware.
- MX4265 target magnet and MX4329-03 HE sensor with harness - related sensor parts for certain arm setups.
- Arm mounting bolts, washers, nuts, clamps, and bracket covers - verify whether they are included or required separately.
Technician Note
Before replacing MX002652, inspect the wood arm, bracket holes, bracket hardware, arm mount, pivot hardware, breakaway hardware, switch wiring, and any evidence of arm impact. A sagging or loose arm may be caused by a split wood arm, wrong-size arm, loose fasteners, worn bracket holes, impact damage, or incorrect arm balance.
Do not reuse a cracked, water-damaged, twisted, or undersized wood arm with a new bracket. The bracket can only hold properly if the wood arm and mounting hardware are in good condition and matched to the StrongArmPark DC arm setup.
Before Ordering, Confirm
- The required part number is MX002652.
- The operator is a HySecurity StrongArmPark DC / SAP application where the parts diagram lists MX002652.
- The arm setup uses a 1 inch x 4 inch wood arm.
- The repair requires the wood arm bracket assembly, not the wood arm itself, breakaway bracket, kill switch kit, harness, light strip, or complete arm assembly.
- The replacement wood arm is sourced separately and matches the required size and application.
- The arm mounting hardware, bracket holes, pivot points, and surrounding arm hardware have been inspected for impact damage or wear.
- The package includes the expected bracket and hardware, or any missing related hardware is ordered separately.
- The operator has not been modified with non-standard arm hardware or non-factory brackets.
Installation and Service Notes
- Disconnect and secure operator power before servicing arm hardware.
- Support the barrier arm properly before removing bracket or mounting hardware.
- Do not work under an unsupported barrier arm.
- Use the correct 1 inch x 4 inch wood arm where specified by the parts diagram.
- Do not overtighten hardware to the point that the wood arm splits or crushes.
- Inspect arm balance, bracket alignment, and hardware tightness after installation.
- If the arm was struck, inspect the bracket, arm mount, breakaway hardware, switch wiring, harnesses, and operator cabinet before returning the operator to service.
- Verify normal arm travel, stop/kill switch function where applicable, controller response, and all required safety devices after service.
Professional Advisory
Wood arm bracket replacement should be handled by a qualified gate technician when the repair involves long or heavy barrier arms, impact damage, breakaway hardware, kill switch wiring, arm alignment, non-standard arm material, or unknown prior modifications. Do not bypass kill switches, stop circuits, breakaway switches, limit controls, controller protections, access control safety inputs, photo eyes, safety edges, or any required safety devices to keep the operator running.
Product Questions & Answers
What is HySecurity MX002652?
HySecurity MX002652 is a wood arm bracket assembly with hardware for select HySecurity StrongArmPark DC barrier arm applications.
What size wood arm does MX002652 attach to?
Current listings describe MX002652 as attaching to a 1 inch x 4 inch wood arm. The wood arm must be purchased separately.
Does MX002652 include the wood arm?
No. Nice HySecurity does not supply the wood arm with this bracket. The wood arm must be sourced separately and matched to the required 1 inch x 4 inch application.
Is MX002652 for aluminum or fiberglass arms?
No. MX002652 is for wood arm applications where the parts diagram confirms this bracket. Aluminum and fiberglass arm brackets use different hardware and should be verified separately.
Is MX002652 the same as a breakaway bracket with kill switch?
No. MX002652 is the wood arm bracket assembly. Breakaway bracket kits with kill switches, such as MX4050, are separate related parts and should not be treated as the same item.
What should be checked before replacing this wood arm bracket?
Check the wood arm condition, bracket holes, mounting hardware, arm mount, breakaway hardware, switch wiring, arm balance, and parts diagram before replacing only the bracket.
Should a technician install this bracket?
A qualified gate technician is recommended if the arm is long, heavy, damaged from impact, connected to breakaway hardware, or if the operator has unknown prior arm modifications.
